Revision as of 14:09, 2 February 2023

Kvaser develops interfaces and data loggers for any flavor of CAN (controller area network) and CAN-related buses to meet customer system requirements. The Kvaser USB to CAN devices are the approved products of MotoHawk. Kvaser tools are easy to use, accurate and state-of-the-art. Rigorous quality assurance and control processes for both hardware and software ensure that Kvaser delivers a user-friendly and up-to-date tool. Kvaser products are recommended for use with MotoHawk applications because they are all compatible, whereas other tools are not guaranteed to be compatible. Kvaser products are also very cost-effective. The Kvaser USB to CAN cables are compatible with USB 3.0 ports, but not with USB or eSATA ports.

Kvaser's hardware interfaces can be used throughout the product cycle for development, simulation, testing and other maintenance of CAN networks and related hardware. All Kvaser hardware is designed to perform at their optimum in industrial or automotive temperature ranges, while some is specifically ruggedized to endure the most hostile of environments.

Single Channel Kvasers

* = Contact sales to purchase.

New Eagle High-Speed USB to CAN

The New Eagle Branded HIGH-SPEED USB TO CAN INTERFACE represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and 9-pin D-SUB connector, the sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Galvanic isolation is now standard.

Equivalent Kvaser Part Number: Kvaser 685-0

Picture	Product Name	Part Number	Webstore	Downloads
	New Eagle High-Speed USB to CAN Interface with Galvanic Isolation	NE-USB-CAN-001	Purchase	Datasheet

Leaf Light HS v2 J1939-13 TYPE II

The Leaf Light HS v2 J1939-13 TYPE II provides a simple way of connecting a PC with the on-board computer of any J1939-compliant commercial vehicle for diagnostic purposes by means of its USB 2.0 connector and a 9-pin J1939-13 compliant CAN connector. Having made its name as the workhorse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low-cost tools for connecting any CAN network to a PC or mobile computer in marine applications and beyond.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Light HS v2 J1939-13	KVASER 915-8	Purchase	Datasheet

BlackBird v2

Kvaser BlackBird v2 is a high-performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. More onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks or for monitoring a CAN bus while in motion. Based on a radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2's API is “device agnostic” and can be used on a tablet, smartphone or PC.

Picture	Product Name	Part Number	Webstore	Downloads
	BlackBird v2	KVASER 671-3	Purchase	Datasheet

Ethercan Light HS

The Kvaser Ethercan Light HS CAN to Ethernet interface facilitates the adoption of the Internet of Things (IoT) concept within modern manufacturing environments by enabling data from any CAN product or system to be accessed over the Internet via an Ethernet-equipped PC.

Picture	Product Name	Part Number	Webstore	Downloads
	Ethercan Light HS	KVASER 713-0	Please contact sales	Datasheet

Leaf Light HS v2 CB

The Leaf Light v2 CB is the bare circuit board version of Kvaser's popular Leaf Light v2 interface - a single-channel, high speed, USB to CAN bus interface. Having made its name as the workhorse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low-cost connection to the PC.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Light HS v2 CB	KVASER 733-8	Please contact sales	Datasheet

Leaf Light HS v2 OBDII

The Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector. Having made its name as the workhorse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low-cost tools for connecting any CAN network to a PC or mobile computer in vehicle diagnostic applications and beyond.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Light HS v2 OBDII	KVASER 732-1	Purchase	Datasheet

Leaf Light HS v2 M12

The Leaf Light HS v2 M12 is the marine version of Kvaser’s popular Leaf Light v2 interface. This device provides a simple way of connecting a PC with the on-board computer of a marine electronics system by means of its standard USB 2.0 connector and a 5-pin National Marine Electronics Association (NMEA) approved CAN connector. The Leaf Light HS v2 M12 is ideal for diagnosing NMEA 2000 bus issues, configuring and flashing NMEA 2000 bus nodes, monitoring NMEA 2000 bus traffic and load conditions, and stimulating or emulating NMEA 2000 nodes.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Light HS v2 M12	KVASER 881-6	Purchase	Datasheet

Leaf Pro HS v2

Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that brings programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin D-SUB; bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Pro HS v2	KVASER 843-4	Purchase	Datasheet

Leaf Pro HS v2 OBDII

Kvaser Leaf Pro HS v2 OBDII is an evolution of the Leaf family that bring programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customization using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a 16-pin OBDII connector, but a version with a standard 9-pin D-SUB is also available. Please see Kvaser Leaf Pro HS v2 for details.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Pro HS v2 OBDII	KVASER 849-6	Please contact sales	Datasheet

Leaf Professional Rugged HS

Kvaser Leaf Professional Rugged is a one channel, very high-performance, USB interface for CAN. With an IP65-rated aluminum housing, it offers the ability to easily connect your PC and CAN bus network. It includes Kvaser's patented MagiSync feature for synchronized timestamping and galvanic isolation for protection against voltage spikes.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Professional Rugged HS	KVASER 509-9	Purchase	Datasheet

Leaf Professional LS

Kvaser Leaf Professional is a one channel, high-performance, USB interface for Low-Speed CAN. A versatile and powerful interface that offers easy connection between your PC and CAN bus network, it includes Kvaser's patented MagiSync feature for synchronized timestamping, galvanic isolation for protection against voltage spikes and Auto-Transmit for placing messages on the bus at set intervals.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Professional LS	KVASER 261-6	Please contact sales	Datasheet

Leaf Professional SWC

Kvaser Leaf Professional is a one channel, high-performance, USB interface for Single-Wire CAN. A versatile and powerful interface that offers easy connection between your PC and CAN bus network, it includes Kvaser's patented MagiSync feature for synchronized timestamping, galvanic isolation for protection against voltage spikes and Auto-Transmit for placing messages on the bus at set intervals.

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Professional SWC	KVASER 264-7	Please contact sales	Datasheet

Leaf Professional LIN

Picture	Product Name	Part Number	Webstore	Downloads
	Leaf Professional LIN	KVASER 269-2	Purchase	Datasheet

Memorator Light HS

Designed for troubleshooting any CAN-based system, the Kvaser Memorator Light HS is an easy-to-use tool for logging serial data with no pre-configuration or software setup required. With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator Light HS	KVASER 513-6	Purchase	Datasheet

CAN/CAN FD to USB

The Kvaser U100 is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with high timestamp precision and is compatible with applications that use Kvaser's CANlib.

Picture	Product Name	Part Number	Webstore	Downloads
	CAN/CAN FD to USB	KVASER U100	Purchase	Datasheet

Multi Channel Kvasers

* = Contact sales to purchase.

Kvaser USBcan Light 2xHS

The Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high-speed CAN buses to a PC or mobile computer. With a USB 2.0 compliant connector at one end and two 9-pin D-SUB connectors at the other, the Kvaser USBcan Light 2xHS is slightly larger than the one-channel Leaf Light v2 but features the same sleek, ergonomically designed housing that Kvaser products have become renowned for. Galvanic isolation is standard on this device.

Picture	Product Name	Part Number	Webstore	Downloads
	USBcan Light 2xHS	KVASER 714-7	Purchase	Datasheet

USBcan Light 4xHS

The USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high-speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad-channel CAN interface has a standard USB connector at one end and four high-speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9-pin D-SUB connectors.

Picture	Product Name	Part Number	Webstore	Downloads
	USBcan Light 4xHS	KVASER 831-1	Purchase	Datasheet

USBcan Professional 2xHS v2

The USBcan Pro 2xHS v2 is a USB to dual-channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high-speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.

Picture	Product Name	Part Number	Webstore	Downloads
	USBcan Professional 2xHS v2	KVASER 752-9	Purchase	Datasheet

USBcan Professional RJ45

The Kvaser USBcan Professional RJ45 is a high-performance, two-channel CAN bus interface. A standard USB 1.1 connection enables several interfaces to be easily connected to a PC. Standard RJ45 connectors allow the user to connect to the CAN bus via ethernet port.

Picture	Product Name	Part Number	Webstore	Downloads
	USBcan Professional RJ45	KVASER 413-9	Please contact sales	Datasheet

USBcan Professional 5xHS

Kvaser USBcan Pro 5xHS is a five-channel, high-performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN buses, in real-time. With all channels configured for High-Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with high timestamp precision. This device is CAN FD ready.

Picture	Product Name	Part Number	Webstore	Downloads
	USBcan Professional 5xHS	KVASER 779-6	Purchase	Datasheet

USBcan R v2

The Kvaser USBcan R is a robust, easy-to-carry device designed for high-end applications. Two CAN channels provide quick reaction times and high data throughput. The Kvaser USBcan R is perfect for rapid ECU reflashing, advanced bus analyzers and efficient development work.

Picture	Product Name	Part Number	Webstore	Downloads
	USBcan R v2	KVASER 920-2 (replaces the 579-2)	Purchase	Datasheet

Memorator Professional 2xHS v2

Kvaser Memorator Pro 2xHS v2 is a professional-level, dual-channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB 1.1, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real-time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant.

Additional Features:

Supports CAN FD
t scripting
128 Filters

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator Pro 2xHS v2	KVASER 819-9	Purchase	Datasheet

Memorator Professional HS/LS

Kvaser Memorator Professional HS/LS is a two-channel, high-performance, CAN bus interface and data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC using USB 2.0. As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. Advanced configuration features such as message filtering, triggers and error detection mode are made with a user-friendly configuration program (Kvaser’s Memorator Tools software) and stored on the flash disk.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator Professional HS/LS	KVASER 417-7	Purchase	Datasheet

Memorator R SemiPro

Kvaser Memorator R SemiPro is a ruggedized, two-channel CAN bus interface and standalone data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC with USB 2.0. The Memorator R SemiPro contains an advanced set of features: message filtering, triggers, error detection mode, battery backup, integrated SD card, Linx J1587 compatible, galvanic isolation and much more. Configurable using Kvaser's included Memorator Tools software.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator R SemiPro	KVASER 490-0	Purchase	Datasheet

Memorator 2xHS v2

The Kvaser Memorator 2xHS v2 is a compact, dual-channel CAN bus interface and standalone data logger that allows users to monitor and collect data from two high-speed CAN channels simultaneously. Standalone mode logs data to an SD card; interface mode provides a real-time connection between the CAN network and a PC via USB.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator HS/HS	KVASER 821-2 Replaces KVASER 175-6 (EOL = 2018)	Purchase	Datasheet

Memorator HS/SWC

Kvaser Memorator HS/SWC is a dual-channel, intermediate-performance, CAN bus interface and standalone data logger. This device has one CAN channel for High-Speed CAN and the second for Single-Wire CAN. In interface mode, it connects to a PC with USB 1.1. As a data logger, Memorator makes for a perfect flight recorder due its compact design. Logging data goes to a standard SD card (supplied) or MMC disk. Triggers, filters, etc., can be set via our user-friendly configuration program and stored on the flash disk.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator HS/SWC	KVASER 234-0	Please contact sales	Datasheet

Memorator Professional 5xHS

Kvaser Memorator Professional 5xHS is a five-channel, high-performance CAN bus interface and standalone data logger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB.

Memorator Professional 5xHS offers advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot, galvanic isolation and much more. Configurable using Kvaser's Memorator Config Tool, it is also capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is supplied.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator Professional 5xHS	KVASER 778-9	Purchase	Datasheet

Memorator Professional 5xHS CB

Kvaser Memorator Professional 5xHS CB is a five-channel, high-performance, CAN bus interface and standalone data logger that allows users to monitor and collect data from up to five CAN channels using just one device. It is supplied "bare board" i.e. without housing and can thus be built into any system. The Memorator Professional 5xHS CB is CAN FD-ready.

Configurable using Kvaser's Memorator Config Tool, Memorator Professional 5xHS CB is capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is supplied. The device is also supported in CANlib, Kvaser’s universal software development kit.

Picture	Product Name	Part Number	Webstore	Downloads
	Memorator Professional 5xHS CB	KVASER 832-8	Please contact sales	Datasheet

PCI Kvasers

Kvaser Mini PCI Express HS

The Kvaser Mini PCI Express HS is a highly integrated CAN add-on board that lets embedded system developers add CAN functionality to any standard computer board with Mini PCI Express capability. The add-on board offers a single-channel, high-speed CAN interface with error frame detection and on-board buffer. This board has a low-profile connector that complies with the Mini PCI Express standard, which connects via a cable to a D-SUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected while all the electronics remain inside the computer housing.

Picture	Product Name	Part Number	Webstore	Downloads
	Mini PCI Express HS	KVASER 688-1	Purchase	Datasheet

Kvaser Mini PCI Express 2xHS

Offering silent mode, error frame detection and an on-board buffer, this small-form factor board fits any embedded data acquisition system, but is particularly suitable for fleet management to monitor key parameters such as fuel economy, engine speed, braking and accelerator pressure, and gearshift patterns.

Picture	Product Name	Part Number	Webstore	Downloads
	Mini PCI Express 2xHS	KVASER 743-7	Purchase	Datasheet

Kvaser PCIEcan 4xHS

Kvaser PCIEcan 4xHS is a highly integrated, high-speed CAN card that adds four high-speed CAN network channels to any standard computer board with PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, this small-form factor add-on board fits many embedded data acquisition systems and supports CAN FD.

Picture	Product Name	Part Number	Webstore	Downloads
	PCIEcan 4xHS	KVASER 683-6	Purchase	Datasheet

Kvaser PCIcanx HS/HS

Kvaser PCIcanx HS/HS is a dual-channel, high-speed CAN interface that can be used in both regular PCI and PCI-X slots. A galvanically isolated CAN bus driver protects the hardware. The onboard CAN controller is I/O mapped for quick reaction times.

Picture	Product Name	Part Number	Webstore	Downloads
	PCIcanx HS/HS	KVASER 331-6	Purchase	Datasheet

Kvaser PCIEcan 2xHS v2

Kvaser PCIEcan 2xHS v2 is a highly integrated, high-speed CAN card that adds two high-speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.

Offering silent mode, error frame detection and generation, and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.

Picture	Product Name	Part Number	Webstore	Downloads
	PCIEcan 2xHS v2	KVASER 861-8 (replaces the 405-4)	Purchase	Datasheet

KVASER PCIEcan HS v2

Kvaser PCIEcan HS v2 is a highly integrated, high-speed CAN card that adds a single high-speed (ISO 11898-2) CAN channel to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan HS.

Offering silent mode, error frame detection and generation, and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.

Picture	Product Name	Part Number	Webstore	Downloads
	PCIEcan HS v2	KVASER 866-3 (replaces the 425-2)	Purchase	Datasheet

Interface Accessories

T-Cannector v2

Kvaser T-Cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Offering an adjustable CAN termination resistor (120/60/0Ω) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices, such as Kvaser’s Blackbird and Memorator series, without internal power.

Picture	Product Name	Part Number	Webstore	Downloads
	T-Cannector v2	KVASER 776-5	Please contact sales	Datasheet

D-SUB 9-Pin 120Ω Termination Adapter

Kvaser D-SUB 9-pin 120Ω termination adapter is a CAN adapter with a 9-pin male D-SUB connector at one end and a 9-pin female D-SUB socket at the other. Between CAN High (pin 7) and CAN Low (pin 2), there is a built-in 120Ω CAN terminating resistor.

Picture	Product Name	Part Number	Webstore	Downloads
	D-SUB 9-Pin 120 ohm Termination Adapter	KVASER 801-4	Purchase	Datasheet

Q-Cable 0.3 m

The 0.3 m Q-Cable is a 0.3 m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus.

Picture	Product Name	Part Number	Webstore	Downloads
	Q-Cable 0.3m	KVASER 199-2	Please contact sales	Datasheet

Q-Cable 3 m

The 3 m Q-Cable is a 3 m (approx. 9.8 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus. This variant helps to protect people and equipment from toxic and corrosive gases by emitting limited smoke and no halogens when exposed to high heat sources.

Picture	Product Name	Part Number	Webstore	Downloads
	Q-Cable 3m	KVASER 340-8	Please contact sales	Datasheet

OBDII to D-SUB9 Adapter Cable

A Kvaser OBDII Adapter Cable connects any Kvaser CAN bus interface with a D-SUB9 female connector to any vehicle with an OBDII (J1962) connector.

Picture	Product Name	Part Number	Webstore	Downloads
	OBDII to D-SUB9 Adapter Cable	KVASER 723-9	Please contact sales	Datasheet

OBDII Extension Cable 2.5m

Kvaser's OBDII Extension Cable is a highly durable extension cable 2.5 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture	Product Name	Part Number	Webstore	Downloads
	OBDII Extension Cable 2.5m	KVASER 347-7	Please contact sales	Datasheet

OBDII Extension Cable 5m

Kvaser's OBDII Extension Cable is a highly durable extension cable five meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture	Product Name	Part Number	Webstore	Downloads
	OBDII Entension Cable 5m	KVASER 301-9	Please contact sales	Datasheet

OBDII Extension Cable 10m

Kvaser's OBDII Extension Cable is a highly durable extension cable 10 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture	Product Name	Part Number	Webstore	Downloads
	OBDII Extension Cable 10m	KVASER 348-4	Please contact sales	Datasheet

OBDII Extension Cable 15m

Kvaser's OBDII Extension Cable is a highly durable extension cable of 15 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture	Product Name	Part Number	Webstore	Downloads
	OBDII Extension Cable 15m	KVASER 349-1	Please contact sales	Datasheet

Discontinued/End of Life Products

The following are not being manufactured currently. If you would like to check on remaining stock that might be available, please contact sales.

Product Name	Part Number	Replacement
Kvaser Leaf Light Rugged HS	KVASER 427-6	KVASER 921-9
Kvaser Leaf Light HS v2 J1939-13	KVASER 787-1	KVASER 915-8
Kvaser USBcan II HS/HS	KVASER 159-6	KVASER 714-7
Kvaser Leaf Light HS	KVASER 241-8	KVASER 685-0
Kvaser Leaf Light GI	KVASER 411-5	KVASER 685-0
Kvaser Leaf Light With J1939-13 Connector	KVASER 642-3	KVASER 787-1 => Kvaser 915-8
Kvaser Leaf Professional HS	KVASER 243-2	KVASER 843-4
Kvaser Memorator Professional HS/HS	KVASER 351-4	KVASER 819-9
USBcan Professional HS/HS	KVASER 357-6	KVASER 752-9
BlackBird SemiPro HS	KVASER 441-2	KVASER 671-3
BlackBird SemiPro HS/HS	KVASER 453-5	KVASER 671-3
Eagle	KVASER 567-9	KVASER 819-9
USBcan R	KVASER 579-2	KVASER 920-2
Leaf Light HS v2	KVASER 685-0	NE-USB-CAN-001
Linx J1587	KVASER 389-7	Please contact sales.
OEM Leaf	KVASER OEM Leaf	Please contact sales.

Kvaser Software

Kvaser offers third-party software for analysis, simulation, calibration, debugging and more. Developers can download software and start developing around any Kvaser interface right away.

CANKing

CANKing is a CAN bus monitor and general-purpose diagnostic tool. It is especially suited for interactive development work. CAN messages can be easily sent and the corresponding impact on the target module observed. To use CANKing, it is necessary to purchase one of our CAN interfaces such as the Kvaser Leaf USB to CAN converters. It is a free software that comes with the Kvaser product. This product allows the user to see all CAN messages on the bus in either decimal or hexadecimal form. It also allows the user to send out simple test messages.

Raptor-CAN

Raptor-CAN is an easy-to-use CAN data analysis PC tool. It helps test and verify real-time CAN systems. Key features include the ability to monitor and control CAN messaging, and to store and replay CAN traffic. Click here to learn more!

Kvaser Database Editor

Kvaser offers a DBC File creator/editor which can be downloaded from here: Kvaser DBC Editor Download

Contact Us

For questions or more information, please contact sales@neweagle.net

@@ Line 859: / Line 859: @@
 |}
-==OBDII Extension Cable 10 m==
+==OBDII Extension Cable 10m==
 Kvaser's OBDII Extension Cable is a highly durable extension cable 10 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Kvaser: Difference between revisions