ECM-S12X-070

ECM-S12X-070

• 

  ECM-S12X-070

Product Summary

A new Engine Control Module in the MotoHawk modules product line, these rugged controllers are capable of operating in harsh automotive, marine, and off-highway applications. Numerous marine applications have proven the capability of this family. Based on the Freescale MC9S12 family of microprocessors, the ECM-S12X-070-1001 is capable of delivering complex control strategies. The onboard floating-point unit and high clock frequency allow software to be executed in shorter times. The CAN 2.0B datalink ensures interoperability with other vehicle systems.

Features include:

• Freescale MC9S12XET256, 50 MHz Microprocessor
• Operating Voltage: 6.5-16 V, 24V (Jump start), 5V (crank)
• Operating Temperature: -40deg C to +85deg C (105deg C in some applications)

LSD Information

• Only LSO1 has current sensing. The current monitoring on LSO1 is intended for diagnostic purposes, or to indicate high vs. low motor load. The Vad=.255*lout, and is 10-bit.
• PWM is supported in MotoHawk on LSO1, 2, 3, 4, 5, 6, 7, and 8. However, only LSO 2, 3, and 4 have a flyback diode and are intended to be used as PWM. They are intended to be used as a discrete output, unless the load has no stored energy.
• For the LSO1 is capable capable of PWM, however the flyback diode is not sized for continuous PWM and was intended for discrete mode.
• If you look at the datasheet for LSO1 it will mention an A, B, and C pin. These are not separate LSO's, but instead all three pins are parallel outputs for LSO1 to allow for a higher current output.

Family includes:

• ECM-S12X-070-1001

Datasheets

ECM-S12X-070-1001 70 pin

Harness Drawings

ECM-S12X-070-1001 Pigtail Harness

ECM-S12X-070-1001 Programming Harness

ECM-S12X-070-1001 to Simulator Harness

Other Engine Control Modules

More Information: Engine Control Modules

Webstore

Webstore: 70 pin Engine Control Modules

Webstore: All Control Modules