Raptor Display Examples

Raptor Display Help

Example Prebuilt Projects

The collection of files below are Example Raptor Display Builds.

These files are aimed to assist in testing or troubleshooting your VeeCAN displays.

Current models supported:

• VeeCAN 700
• VeeCAN 500
• VeeCAN 320
• VeeCAN 320 Lite
• VeeCAN 300R
• VeeCAN 800
• VeeCAN 128

Download the example projects: PrebuiltRVC.zip

• See the readme.txt for installation information included in the PrebuiltRVC.zip

Raptor Platform

Raptor Display Examples

VeeCAN 500/700 Display Examples

• A selection of displays created on the Raptor VeeCAN 500 and Raptor VeeCAN 700
• 

  Autonomous Drive screen: Shows system states to the driver/operator

• 

  System Component Measurement screen: Provides information about the on-board system

• 

  Faults screen: This screen populates with faults as they appear on the system

• 

  Engine Display screen: Fully customizable images and actions including faults and status

Note: The VeeCAN 500 and 700 are developed using the same connectors, screen resolution and overall physical design. The 700 is the larger of the two displays with its 7-inch display, whereas the 500 has a 5-inch display. The projects above can be programmed onto either device.

VeeCAN 320 Display Examples

• A selection of displays created on the Raptor VeeCAN 320
• 

  Example of a fuel gauge and fuel status screen

• 

  A collection of dials showing engine information

• 

  A custom Raptor screen showing the battery meter, vehicle speed and engine speed

• 

  A very simple Raptor System info screen and menu

• 

  Anything is possible in Raptor, even a login screen such as this

• 

  Raptor's customization is shown heavily in this custom menu screen

• 

  A custom system menu screen, capable of controlling the whole display

• 

  Raptor's possibilities are endless, with customs displays like this one

VeeCAN 800 Display Examples

• A selection of displays created on the Raptor VeeCAN 800
• 
• 
• 

• 
• 
• 

• 
• 
• 

• 

  Main Display screen

• 

  Data screen

• 

  Fault screen

VeeCAN 300R Display Examples

• 

  Speedometer screen

Raptor Simulators

Installation Instructions

1. Downloads
   • Select a simulator to use from below (i.e. The Dancing Bear Simulator)
   • Select the correct Kvaser drivers for your operating system
2. Installation
   • Extract the Simulator zip file anywhere (My Documents, Desktop, etc.)
   • Run the driver installer downloaded from the Kvaser website (link below)

*Kvaser drivers required.

Download Kvaser Drivers.

Dancing Bear Simulator

Download the Dancing Bear Simulator.

• 

  Dancing Bear logo on a VeeCAN Splash screen, a custom system for a luxury catamaran yacht

• 

  A custom screen from the Dancing Bear boat system, containing the Refrigeration screen

• 

  The Dancing Bear's system water and fuel monitor

• 

  A Raptor-made screen displaying and controlling overrides

Custom Advanced Simulator

Download the Custom Advanced Simulator.

• 

  Initial Raptor splash screen

• 

  Example of a fuel gauge with a fault panel on the side and additional information at the bottom

• 

  A dial showing useful statistics for a specific engine

• 

  A quad gauge screen full of useful information, from temperatures to pressure

Electric Vehicle Simulator

New Eagle's Electric Vehicle HMI can be used as an off-the-shelf EV dash display or the template for your custom HMI to suit any system.

Try this display on your own PC. Download the EV Desktop Simulator.

• 

  New Eagle Splash screen

• 

  Main menu for the EV custom display

• 

  A motor status information screen

• 

  A battery status information screen