This block implements PGN 58112 Command Non-Continuously Monitored Test (DM7). This block implements the base of the DM7 message. Additional blocks will be needed inside to interface to the correct code to perform the requested test. Without modification, no tests are supported and all requests will cause a NACK response. The block will indicate, based on the Test Identifier if a DM8 or DM30 response is required, based on J1939-73 5.7.7.1 (Test Identifier).
Inputs
Input
Type
Description
Outputs
Output
Type
Description
DM8Fcn
function call
Trigger indicates that a DM8 response is requested.
DM30Fcn
function call
Trigger indicates that a DM30 response is requested.
