Multiplexed Power Distribution Module
Overview
The Multiplexed Power Distribution Module (MPDM) offers economical CAN network oversight for high-power circuits in vehicle electrical systems. It is also known as the Cooper Busman mVec and functions as a multiplexed Vehicle Electrical Center. It is manufactured as a hardened and weather tight module. The MPDM may be configured to provide various OEM circuit protections and switching functions using industry standard fuses, relays and breakers. The status and control of each circuit is then accessible through J1939/CAN open messages. In addition, the connector and power/ground studs have weathertight connectors. A MotoHawk library is also available for easy integration of the MPDM.
-
An open Multiplexed Power Distribution Module
-
A closed Multiplexed Power Distribution Module
Highlights:
- High Power - This module uses a technology that is ideal for high current circuits and networking electronics. Each module is rated up to 30 A, and a maximum of 32 outputs are possible with it. 12 and 24 volt systems are both supported on this module.
- Ruggedness – Waterproof to high pressure spraying, this module is designed and manufactured with robust features such as heavy duty housing, silicon and Gortex gasketing, and protective conformal coated electronics, to operate in demanding vehicle environments such as those found in construction, agriculture, heavy truck, bus, RV, marine and specialty vehicle markets.
- Flexibility – This module is offered in various standard and customized versions, with custom versions being configured to OEM wiring requirements. It accepts relays, fuses, circuit breakers, resistors, diodes etc based on the industry standard 2.8 mm footprint. Not only that, the software works with MotoHawk and New Eagle offers a pre-programmed application library to facilitate seamless integration with systems being developed on the same platform.
Product Information
General Features
- Operating Voltage - 9 to 32 Volts
- Max Current Capacity - 200 Amps
- Max Current Capacity per pin - 30 Amps
- Operating Temperature - -40 C to +85 C
- Ingress Protection - IP66 Equivalent
- CAN Baud rate - 250kbps
- Multiple Modules Will Work on a Single CAN Bus
New Eagle sells two configurations of the MPD Module. One has 8 relays and 16 fuses, the other has 12 relays and 8 fuses. Please click on the pictures below to see the pin mappings from relays/fuses to output connector. These are also present in the internal connection drawing documents available for download below.
8 Relay Configuration
Within the 8 relay configuration, there are two options based on power input connectors.
- Power inputs with M8 Studs
- Sealed power inputs with connectors
12 Relay Configuration*
*Please contact sales. Must be ordered in multiples of 8.
Documentation
Datasheet
For Multiplexed Power Distribution Module datasheet, Click Here
User Manual
Click here for MPDM-NE1 User Manual, a detailed manual explaining the product.
CAD Drawing
click here for 3-D CAD (.stp)
Internal Connection Drawings
- 8 Relay configuration
- Both options in 8 relay configuration have the same electrical grid connections inside. Click here to download the drawing.
- 12 Relay configuration
- Click here to download the drawing.
Raptor CAN Library
Please contact sales for information about a pre-programmed application library to facilitate easy integration with systems being developed on the Matlab/Raptor platform.
Frequently Asked Questions (FAQ)
Q - If the 2-pin connector seems off center in the device housing, please contact support@neweagle.net. Please note that the mating connector still makes contact on these pins and will not reduce functionality.
Q - if all 8x relays are On, with 12V being supplied to their fused inputs, but no loads connected to any outputs, they get hot to the touch, i.e. from the coils being energised. Is this normal?
A - If the coils are energized they will be hot to the touch, even with no load applied.
Webstore
Module
Multiplexed Power Distribution Module
Connector Kit
New Eagle sells the connectors and parts in the form of a kit. Click here to purchase it from the webstore.
Obsolete
MotoHawk CAN Library
Pre-programmed application library to facilitate easy integration with systems being developed on the Matlab/MotoHawk platform.
