Multiplexed Power Distribution Module
Multiplexed Power Distribution Module (MPDM)
The Multiplexed Power Distribution Module (MPDM) offers economical CAN Network oversight for high power circuits in vehicle electrical system. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages. A MotoHawk library is also available for easy integration of the MPDM.
-
An Open Multiplexed Power Distribution Module
-
A Closed Multiplexed Power Distribution Module
Highlights
High Power - This module uses a technology that is ideal for high current circuits and networking electronics. Each module is rated up to 30 A, and a maximum of 32 outputs are possible with it. 12 and 24 volt systems are both supported on this module.
Ruggedness – Waterproof to high pressure spraying, this module is designed and manufactured with robust features such as heavy duty housing, silicon and Gortex gasketing, and protective conformal coated electronics, to operate in demanding vehicle environments such as those found in construction, agriculture, heavy truck, bus, RV, marine and specialty vehicle markets.
Flexibility – This module is offered in various standard and customized versions, with custom versions being configured to OEM wiring requirements. It accepts relays, fuses, circuit breakers, resistors, diodes etc based on the industry standard 2.8 mm footprint. Not only that, the software works with MotoHawk and New Eagle offers a pre-programmed application library to facilitate seamless integration with systems being developed on the same platform.
Product Information
New Eagle sells two configurations of the MPD Module. One has 8 relays and 16 fuses, the other has 12 relays and 8 fuses.
8 Relay Configuration
Within the 8 relay configuration, there are two options based on power input connectors.
- Power inputs with M8 Studs
- Sealed power inputs with connectors
12 Relay Configuration
Connector Details
Please note that New Eagle is currently not building a connector kit for the Multiplexed Power Distribution Module. However we hope to be adding this service in the near future.
Click Here for more information on Connector and parts for this module.
Datasheet
Multiplexed Power Distribution Module Datasheet