MiniView 1700
MiniView 1700
-
MiniView 1700, A rugged 3"x3" LCD display.
This rugged display unit is capable of operating in harsh marine and off-highway applications. Designed to operate with the MotoHawk® line of rugged controllers, the circular display (65 pixels high, 65 pixels wide, 4 built-in fonts, adjustable backlight) is controlled from the customer application via the MiniView 1700 CAN interface, typically using the MotoHawk® block set. If you're looking for a more functional, color, and equally affordable display as MiniView, you may want to check out the Veethree Instruments VeeCAN 320.
- Features include:
- Operating Temperature: -40C to 60C
- CANbus data link
- Comes with SmartCraft connector
- IP-X7 Marine Protection Rating
- Rugged Case
Application Note
The Miniview 1700 has been designed as a drop-in replacement to fulfill demand for the original Miniview displays. Kongsberg’s CANtrak 1700 makes up the hardware layer with a larger 128x64 pixel, 3-button display, on top of which New Eagle has recreated the Miniview display-CAN interface. Existing Miniview users can expect their current Miniview applications to function on the Miniview 1700 without additional effort. Additionally, the hardware uses the same 2” circular mounting dimensions, which makes this a true drop-in replacement for those looking to update their Miniview hardware.
CAN
MiniView 1700 comes with a fixed CAN baud rate of 250kbps (not configurable via the MotoHawk block set). The CAN ID’s are also not configurable.
Input Specification
Max Voltage is +18 Volts. Above 18 volts the unit might become damaged.
The interface circuits and the electronic device connected to the network are designed to withstand over voltage and wiring errors.
No permanent damage shall result from a voltage level of +/- 18 Volts applied between any two wires in the interface for an indefinite period of time.
No permanent damage shall result from miswiring the interface lines in any combination for an indefinite time.
CAN Specification
| Message ID | Purpose | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7 |
| 0x421 | Heartbeat | Hardware Type | Software Version | ||||||
| 0x422 | Set Backlight | percent | |||||||
| 0x423 | Draw Line | x0 | y0 | x1 | y1 | attrib msb | attrib lsb | color | fill color |
| 0x424 | String Xfer | page, string* | char 0 | char 1 | char 2 | char 3 | char 4 | char 5 | char 6 |
| 0x424 | String Xfer | page, string* | char 7 | char 8 | char 9 | char 10 | char 11 | char 12 | char 13 |
| 0x424 | String Xfer | page, string* | char 14 | char 15 | char 16 | char 17 | |||
| 0x425 | Draw String | String # | x loc | y loc | font | attrib msb | attrib lsb | color | fill color |
| 0x426 | Clear Screen | ||||||||
| 0x427 | Draw Rect | x0 | x1 | y0 | y1 | attrib msb | attrib lsb | color | fill color |
| 0x428 | Draw H Line | x0 | x1 | y | attrib msb | attrib lsb | color | fill color | |
| 0x429 | Draw V line | x | y0 | y1 | attrib msb | attrib lsb | color | fill color | |
| 0x42A | Set GUI Mode | mode | |||||||
| 0x42B | Draw Bitmap | bitmap | x loc | y loc | attrib msb | attrib lsb | color | fill color | |
| 0x42F | Button Pressed | button | asserted | count | |||||