Raptor:OBD Drive Cycle
Return to the main Raptor page
Description
This block signals the end of a drive cycle to the OBD Fault Manager.
Inputs
| Input | Type | Description |
|---|---|---|
| Inhibit | boolean | Inhibits this block from signaling the end of a drive cycle (Only available when enabled). |
| Warmup Cycle | boolean | Indicates if the drive cycle met the warmup cycle criteria. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Show Inhibit Port | Enables the Inhibit input port. |
Supported Versions
- Raptor 2013a_0.0.1 and newer