Raptor-Cal-Release-Notes

From NewEagleWiki
Revision as of 17:17, 16 November 2017 by 107.4.110.88 (talk)
Jump to navigation Jump to search

2015-05-25: Release 2015a.0.0.1

Highlights

This version features significant stability and performance improvements, improvements to calibrations workflows (offline calibrations in particular) and numerous UI improvements.

Details

  • 0000866 Changing CAN Baud rate causes the application to crash
  • 0000865 Opening offline display with no RPG shows cryptic error
  • 0000832 Extracting an online CAL with a signal to the grid creates a duplicate value in the RCAL
  • 0000863 Reduce default cell margins
  • 0000179 Signal Detail Pane
  • 0000838 Refreshing signals when doing offline calibration causes crash
  • 0000841 Explicitly allow partial calibrations
  • 0000856 Drag-n-drop on SignalsContainer takes wrong item
  • 0000858 Units cells overflow to the left
  • 0000859 Closing offline display dos not remove container frrom signal tree
  • 0000843 Reading an .rcal with duplicate signals causes the application to crash
  • 0000842 Show home page when all other documents are closed
  • 0000748 extract calibration should not try to place the values on the page
  • 0000711 Make UI consistent between Transfer Upgrade aed Transfer Merge
  • 0000837 Signal Container needs to only show signals contained in rcal when doing offline calibrations
  • 0000835 Drag-n-drop between DAQScheduleViewModel causes crash
  • 0000831 Invalid veeCAN package causes application to crash
  • 0000830 Remove references to RIL.UsbDriveInfo
  • 0000784 DAQ gets hung
  • 0000824 Wire in old cal workflows for patch release
  • 0000801 About picture says merlin and shows a merlin picture
  • 0000783 Merlin reference when no Kvaser connected
  • 0000793 Default Datalogging Output Path
  • 0000782 Melrin Reference in License Check
  • 0000864 Remove unit text frrom the grid
  • 0000833 Various drag-n-drop actions in the DAQ lists cause the application to hang
  • 0000825 First 2015a release will also accept 2014b licenses

2015-03-16: Release 2014b.0.1.10

  • 0000780: Ability to recover Motohawk modules in hardboot
  • 0000779: Connection and reflash are broken

2015-03-16: Release 2014b.0.1.9

  • 0000772: Add shortcut to Motohawk Packager frrom Merlin UI
  • 0000770: Moving items between daqs throws an exception
  • 0000640: Merlin display signals to display values as Hex or Decimal
  • 0000769: Indicate signal direction in signal select
  • 0000737: A, B, C, D for column headers
  • 0000761: Corrupted RecentFiles.xml causes the application to crash
  • 0000760: Setting value on disconnected XCP module causes the application to crash
  • 0000719: RDIS files don't use the default RDIS directory
  • 0000676: Long status messages are unreadble
  • 0000673: Ctrl*s to save current display
  • 0000646: MotoHawk modules need offline support
  • 0000645: Notify UI of lost MIL Connection
  • 0000687: SignalGridViewModel._signalsOnGrid need to be handled by name and not object reference
  • 0000628: name tabs better when editing a can offline
  • 0000654: upload online cal should be done in a dialog
  • 0000694: create a "fast" query list
  • 0000575: add ability to rearrange signals on grid w/ drag and drop
  • 0000585: visually distinguish labels frrom data
  • 0000663: CAN monitor should distinguish between error frames and loaded CAN bus
  • 0000668: CAN traffic monitors stop working after Kvaser USB is removed and then restored
  • 0000660: adding second CAN channel requires Merlin restart before it is accessable
  • 0000649: table signals should have as many sub signals as possible collected under them in the signal tree
  • 0000695: deleting one instance of a signal frrom the grid removes the signal frrom RDIS
  • 0000672: save calibration tool bar button's tool tip says "Save Calibration Command"
  • 0000680: Display signal 'Help Text' (LongIdentifier in A2L) as the tooltip shown when mouse over a signal in a display.
  • 0000583: application monitor signals not correct


2015-01-26: Release 2014b.0.1.8

  • Added limited support for MotoHawk module connectivity (no cal workflows, only a selection of modules)
  • Improved Merlin's handling of very heavy CAN busses:
    • Notifications when there is enough CAN traffic that communications with the module might not be reliable
    • Notifications when DAQ packets are being dropped
  • Added basic data logging:
    • Record and stop buttons in tool bar
    • Records all scalar-sized signals to a CSV file
  • Added support for node-locked licenses
  • Added cell-justification formatting options
  • Display files preserve cell-justification and DAQ schedule
  • Improvements to DAQ scheduling:
    • Drag-and-drop signals between the DAQs and Queries
    • Signals that don't fit on a DAQ are cascaded down to slower DAQs
    • Signals are put on the slowest DAQ by default (instead of the fastest)
  • Various UI improvements and bug fixes


2014-12-19: Release 2014b.0.1.7

  • Window layout is preserved bewteen sessions
  • Added ability to perform interpolation to modify calibration values
  • Signal tree shows signals sorted by name
  • Display and Calibration files can be opened in Merlin by opening them in Windows Explorer
  • Displays in list of most recent displays on start page can be removed
  • Bug fixes and stability improvements
  • UI improvements


2014-12-17: Release 2014b.0.1.6

  • Added merge and transfer-upgrade calibrations workflows
  • Added upgrade displays workflow
  • Display files now preserve row and column sizing
  • Various bug fixes and UI improvements


2014-11-20: Release 2014b.0.1.5

  • Fixed some bugs in table display
  • Merlin now supports signals-only packages for VeeCAN targets (generated when building just for the VeeCAN simulator)
  • Improvements to the display grid:
    • The selected cell is now highlighted
    • Data entry is easier
    • Arrow key navigation works better
  • Models with non-standard DAQ configurations are better supported
  • Offline calibration extraction frrom RPG files feature added

2014-11-04: Release 2014b.0.1.3

  • Fixed crash when dragging external files onto Merlin grid
  • Cleaned up UI when dragging large signal groups onto grid
  • Fixed crash when refreshing signals when editing an offline calibration
  • Adding new signals into an offline calibration shows the values frrom the RPG
  • Only calibratable signals appear in the signals pane when editing an offline calibration


2014-10-31: Release 2014b.0.1.1

  • Offline calibration editing is supported
  • Fixed some issues with offline display editing
  • Fixed issues with having the same signal on the grid more than once
  • Updated the UI to have improved/consistent icons in the menus and toolbar
  • Merlin handles power-cycling modules while connected
  • Merlin is be able to reflash modules that are not accessible via XCP
  • Removed CHM-based help and replaced with a browser-based help (content still under work)
  • Improved handling of invalid RPG files


2014-10-28: Release 2014b.0.0.14

  • Fixed issue with reading large tables (> 255 bytes)
  • Fixed issue with table indexing
  • Added support for XCP access levels
Retrieved from "https://wiki.neweagle.net//index.php?title=Raptor-Cal-Release-Notes&oldid=25390"