Injector Block
Jump to navigation
Jump to search
Return to the main Raptor page
Return to Raptor-Dev Engine Library
Description
This block defines the specifics of the injector sequence provided by the ECU. Used by the ECM-1793-196-1503.
Inputs
| Input | Type | Description |
|---|---|---|
| Enable | boolean | Flag to enable Injector Cutoff |
| EOI | 1/16 deg, int16 | EOI must be greater or equal to 0 |
| Duration | us,uint32 | The duration of the injection |
| Makeup EOI | 1/16 deg, int16 | Used in calculating the Injection Abort Angle |
| Elec to Mech Correction | us, uint32 | The volt correction from electrical to mechanical |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Hardware Resource | Dropdown | Select the outputs to be injected (13-20) |