Autonomous Systems

New Eagle > Products Wiki > Autonomous System Products

Introduction

New Eagle develops and supplies components to Autonomous Systems development. The most common offer is the Raptor line of controllers starting with the GCM196 as a Drive By Wire (DBW) interface between the AI "Brain" and the vehicle or actuator system.

DBW HW Controller Options

GCM-1793-196-1503 (GCM196)

Processor	Inputs	Outputs	Communications	Operating Voltage
260 MHz Infineon Tricore TC1793	45	45	3 CAN, 1 LIN	6-16VDC

Picture	Part Number	Webstore	Downloads	More Information
	GCM-1793-196-1503	Purchase	Datasheet	More Details

BCM-5646-48-1404 (BCM48)

Processor	Inputs	Outputs	Communications	Operating Voltage
120 MHz Freescale MPC 5646	20	15	4 CAN, 4 LIN, 1 Ethernet	9-16VDC

Picture	Part Number	Webstore	Downloads	More Information
	BCM-5646-48-1404	Please contact sales	Datasheet	More Details

Displays

Raptor VeeCAN 800

The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.

Picture	Part Number	Webstore	Downloads	More Information
	DISP-VC800-1402	Purchase	Datasheet Programming Guide Custom Data Logger Guide	More Details Display Examples

Pedal Emulator

PWM-AN-024-1403

The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.

Picture	Product Name	Part Number	Webstore	More Information
	PWM to Analog Converter (Pedal Emulator)	PWM-AN-024-1403	Buy Now	More Details

Power Management

12V Sensor Power

The New Eagle™ Multiplexed Power Distribution Module (MPDM) offers a device to simplify powering of sensors and intelligent fuse function. The MPDM is controlled and provides diagnostic information over CAN.

Picture	Product Name	Part Number	Webstore	Downloads	More Information
	Multiplexed Power Distribution Module	MPDM-NE1	Purchase	Datasheets	More Details
		MPDM-31M-300-0	Purchase

Additional DC power for computing racks

Sevcon DC/DC Converters
The 1.2WK DC/DC converters is suitable to provide additional DC power for autonomous rack computers. New Eagle engineering can assist in its installation and integration in your vehicle.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN5-DCDC-001	Please contact sales	Datasheet	More Information

Additional AC power for computing racks

400V DC to 120/240V AC Inverter
The 350INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 240 to 430 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.

Picture	Part Number	Webstore	Downloads	More Information
	BEL-350INV60-120-240-9G	Purchase	Datasheet	More Details

Contact Us

To learn how to apply the GCM196 as a Drive-By-Wire control module or for questions or more information, please contact sales@neweagle.net. Please check back often as we are adding more autonomous projects to our offering.