This block defines an OBD counter. It is a 16 bit counter which will increment from 0 to 65535 and then rollover to 0. The counter can only be incremented once per drive cycle regardless of the number of times the increment block is executed. The OBD counter can be used to implement the general denominator and ignition cycle counter. This block requires the OBD Fault Manager to be included in the model.
Inputs
Input
Type
Description
Outputs
Output
Type
Description
Parameters
Parameter
Type
Description
Counter Name
The name of the counter. This must be unique.
Visible in Cal Tool
Controls the visibility of the counter data in the calibration tool.
Unit Text
Strings
Sets the unit text that is displayed in the calibration tool.
Help Text
Strings
Sets the help text that is displayed in the calibration tool.
Access Level
Sets the access level of this item in the calibration tool
Function
String
Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on this block's location in the model.
