Autonomous Systems
New Eagle > Products Wiki > Autonomous System Products
Introduction
New Eagle develops and supplies components to Autonomous Systems development. The most common offer is the Raptor line of controllers starting with the GCM196 as a Drive By Wire (DBW) interface between the AI "Brain" and the vehicle or actuator system.
DBW HW Controller Options
GCM-1793-196-1503 (GCM196)
| Processor | Inputs | Outputs | Communications | Operating Voltage |
|---|---|---|---|---|
|
260 MHz Infineon Tricore TC1793 |
45 |
45 |
3 CAN, 1 LIN |
6-16VDC |
| Picture | Part Number | Webstore | Downloads | More Information |
|---|---|---|---|---|
|
|
GCM-1793-196-1503 |
BCM-5646-48-1404 (BCM48)
| Processor | Inputs | Outputs | Communications | Operating Voltage |
|---|---|---|---|---|
|
120 MHz Freescale |
20 |
15 |
4 CAN, 4 LIN, 1 Ethernet |
9-16VDC |
| Picture | Part Number | Webstore | Downloads | More Information |
|---|---|---|---|---|
|
|
BCM-5646-48-1404 |
Please contact sales |
Displays
Raptor VeeCAN 800
The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.
| Picture | Part Number | Webstore | Downloads | More Information |
|---|---|---|---|---|
|
|
DISP-VC800-1402 |
Pedal Emulator
The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.
| Picture | Product Name | Part Number | Webstore | More Information |
|---|---|---|---|---|
|
|
PWM to Analog Converter |
PWM-AN-024-1403 |
Power Management
12V CAN-Based Power Distribution
The New Eagle™ Multiplexed Power Distribution Module (MPDM) offers a device to simplify powering of sensors and intelligent fuse function. The MPDM is controlled and provides diagnostic information over CAN.
| Picture | Product Name | Part Number | Webstore | Downloads | More Information |
|---|---|---|---|---|---|
|
|
Multiplexed Power |
MPDM-NE1 |
|||
|
MPDM-31M-300-0 |
Add DC power for computing racks
Additional AC power for computing racks
400V DC to 120/240V AC Inverter
The Bel Power Solutions 350INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory
loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 240 to 430 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.
| Picture | Part Number | Webstore | Downloads | More Information |
|---|---|---|---|---|
|
|
BEL-350INV60-120-240-9G |
Sensors
Contact Us
To learn how to apply the GCM196 as a Drive-By-Wire control module or for questions or more information, please contact sales@neweagle.net. Please check back often as we are adding more autonomous projects to our offering.