Introduction
New Eagle carries or can build or CAN source Input / Output (IO) devices for your application. Please read below about current offerings or contact sales to discuss your needs.
System Input Modules
1 Universal Signal Input to CAN
The 1 Universal Signal Input Module measures 1 universal signal input (Voltage, Current, Resistive, Digital, Frequency, or PWM) and outputs the value over CAN. This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
1 Universal Signal
Input to CAN
|
AX030530
|
Buy Now
|
Datasheet
|
|
|
Protocol Converter
2 CAN ports
1 RS485 port
|
AX140X00
|
Please contact sales
|
Datasheet
|
10 Universal Signal Input to CAN
The 10 Universal Signal Input Module measures up to 10 analog inputs (0-5V, 0-20 mA or 4-20 mA) for connection to a variety of analog machine sensors or levers and sends the data to a CAN network. The user can also select multiple PWM or frequency inputs as well as a counter input. An active high digital input is another user selectable input.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
|
10 Universal Signal Input
CAN Controller
CANopen
|
AX030120
|
Buy Now
|
Datasheet
|
|
10 Universal Signal Input
CAN Controller
CANopen,
500 kbps
|
AX030120-01
|
Buy Now
|
Datasheet
|
|
10 Universal Signal Input
CAN Controller
CANopen,
1 Mbps
|
AX030120-02
|
Please contact sales
|
Datasheet
|
|
10 Universal Signal Input
CAN Controller
CAN (SAE J1939)
|
AX030121
|
Buy Now
|
Datasheet
|
18 Digital inputs Input to CAN
The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, Frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electroni control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant®.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
18 Digital Signal Input
CAN Controller
SAE 1939,
500 kbps
|
AX030310-01
|
Buy Now
|
Datasheet
|
|
10 Universal Signal Input
CAN Controller
SAE J1939,
1 Mbps
|
AX030120-02
|
Please contact sales
|
Datasheet
|
|
10 Universal Signal Input
CAN Controller
CANopen
|
AX030311
|
Please contact sales
|
Datasheet
|
20 Channel Thermocouple Scanner
The Thermocouple Scanner monitors up to 20 thermocouple channels and the temperature information is provided to the engine control system over J1939(AXTC20) OR CANopen®(AXTC20CO). The scanner can flag low temperature warnings, high temperature warnings, or high temperature shutdowns to the engine control system. It will also detect and indicate open circuits on the sensor wires. Temperature is measured in ºC, with a 0.001ºC resolution. The Scanner is available in CANopen or J1939 CAN communication standards.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
|
Thermocouple Scanner
20 Thermocouple Channels
CAN, SAE J1939
|
AXTC20
|
Buy Now
|
Datasheet
|
|
Thermocouple Scanner
20 Thermocouple Channels
CANopen
|
AXTC20CO
|
Buy Now
|
Datasheet
|
RTD Scanner
The RTD Scanner monitors up to 8 channels of several types of RTDs. The temperature information is provided to an engine control system over a SAE J1939 or CANopen bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All 8 channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity and the RTD inputs are isolated from each other. The RTD temperature monitoring control features rugged packaging and watertight Deutsch IPD connectors. Applications include power generator sets.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
|
RTD Scanner
CAN, SAE J1939
|
AXRTD8
|
Please contact sales
|
Datasheet
|
|
RTD Scanner
CANopen
|
AXRTD8CO
|
Please contact sales
|
Datasheet
|
4 Channel Thermocouple to CAN J1939
The Thermocouple Module monitors up to 4 channels of Type J, K or T thermocouples (others on request). The temperature information is provided to the engine control system over SAE J1939 CAN bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
Thermocouple Module
4 Channel
CAN (SAE J1939)
|
AXTC4
|
Buy Now
|
Datasheet
|
4 Channel Thermocouple to CAN J1939
The Thermocouple Module monitors up to 4 channels of Type J, K or T thermocouples (TC). The temperature information is provided to the engine control system over CANopen®. Average temperature of all the active channels, or all channels from a block of 2, can be broadcasted to the CAN network. The scanner can flag low temperature warnings, high temperature warnings, or high temperature shutdowns to the engine control system.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
Thermocouple Module
4 Channel
CANopen
|
AXTC4CO
|
Please contact sales
|
Datasheet
|
Dual Universal Signal Converter
The dual universal signal converter accepts two voltage, current, resistive, frequency, RPM, PWM or digital control signal inputs and converts them into two signal outputs (analog voltage, analog current or digital signal). The control can be networked to a SAE J1939 networked engine control system. The outputs are isolated from the inputs. The CAN bus port is isolated from both inputs and outputs.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
Dual Universal Signal Converter
|
AX130500
|
Buy Now
|
Datasheet
|
Isolated Signal Converter with CAN
A two channel signal converter with isolation and CAN bus is designed for diesel engine control systems, industrial automation, vehicle automation, and machine control integration. The signal converter accepts two analog current or voltage signals, resistive or digital inputs, PWM or frequency/RPM inputs and converts them into 2 analog, PWM, frequency or digital signal outputs. A +5V reference powers sensor inputs. The unit has 4-way isolation between power, inputs, outputs and CAN. The I/O control includes CAN bus automation for SAE J1939 12Vdc or 24Vdc control systems or CANopen networks. It can be installed in control panels, industrial control automation systems, power generator set control systems, off-highway equipment, construction machines, and test equipment.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
Isolated Signal Converter with CAN
SAE J1939
|
AX130510
|
Please contact sales
|
Datasheet
|
16 Analog I/O Module
The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CAN port for user-defined communications over the bus. It accepts up to 8 analog (0-5V, 0-10V, 0-20 mA or 4-20 mA) or digital or PWM frequency inputs and provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
16 Analog I/O Module
SAE J1939
|
AX030200
|
Buy Now
|
Datasheet
|
16 Analog I/O Module
The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CANopen® port for user-defined communications over the bus. It accepts up to 8 analog inputs (0-5V, 0-10V, 0-20 mA or 4-20 mA) and provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
16 Analog I/O Module
CANopen
|
AX030201
|
Please contact sales
|
Datasheet
|
System Output Modules
CM0410 Input Output Module
The CM0410 is a general purpose input / output controller that includes a single J1939 CAN interface, 4 inputs, 1 high side current measurement pass-through, and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus. The CM0410 is a CAN slave module only and supports no standalone operation.
CAN Analog Signal Output Controllers
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
CAN Analog Signal Output Controller
J1939
|
AX030520
|
Please contact sales
|
Datasheet
|
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
CAN Analog Signal Output Controller
CANopen
|
AX030521
|
Please contact sales
|
Datasheet
|
11:9 CAN Controllers
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
11:9 Controller
SAE J1939
|
AX031200
|
Buy Now
|
Datasheet
|
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
11:9 Controller
CANopen
|
AX031201
|
Buy Now
|
Datasheet
|
CAN to 10 Output Valve Controller
Available in 12, 24 and 48 volt operating input power modules, this durable CAN controlled output controller is capable of providing 10 universal outputs at up to 2.5 amps or 7 amps for the whole module. Applications include proportional valves, hotshot control profiles, PWM signals, and on/off valves. Settings may be user configured via windows based electronic assistant.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
|
CAN to 10 Output
Valve Controller
CAN (SAE J1939)
|
AX021210
|
Buy Now
|
Datasheet
|
|
CAN to 10 Output
Valve Controller
CAN (SAE J1939),
500 kbps
|
AX021210-01
|
Buy Now
|
Datasheet
|
|
CAN to 10 Output
Valve Controller
CANopen
|
AX021211
|
Buy Now
|
Datasheet
|
CAN (J1939) to 4 Channel Analog Output
The IO device belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
CAN to 4 Channel
Analog Output Device
250 kbps
(SAE J1939)
|
AX030500
|
Buy Now
|
Datasheet
|
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
CAN to 4 Channel
Analog Output Device
500 kbps
|
AX030502
|
Please contact sales
|
Datasheet
|
CANopen to 4 Channel Analog Outputs
The 4 Analog Signal Outputs CAN IO device belongs to a family of Axiomatic user-customizable smart controllers. The programmable internal architecture provides users with an ultimate flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using any commercially available CANopen® tools.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
CANopen to 4 Analog
Signal Outputs Device
|
AX030501
|
Buy Now
|
Datasheet
|
TC/Analog Input of CAN Controller
The TC/Analog Inputs to CAN Controller receives inputs from engine coolant, fuel and differential pressure sensors, engine temperature sensors, thermistors as well as thermocouples and is networked to a SAE J1939 based control system. Seven +5V references (10 mA) are provided to power the sensors. The 2 CAN ports are isolated from signal inputs and thermocouple inputs.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
TC/Analog Input of CAN Controller
|
AX18100
|
Buy Now
|
Datasheet
|
| Connector Kit
|
AX070123
|
Buy Now
|
--
|
CAN Enabled Current Driver
The Single 5 amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU. this is a customizable solution that allows for custom logic or the use as a simple CAN based slave. Configuration and Service tools are available.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
CAN Enabled
Current Driver
|
(Custom)
Please contact sales
|
Built upon the
ECM S12-24
or the
ECM 563-48
|
--
|
Multiplexed Power Distribution Module (MPDM)
The New Eagle™ Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages.
Axiomatic
The DC/DC converter is suitable for application on charging/cranking battery-based systems. Power from a vehicle battery is conditioned at the same voltage level and isolation is provided to protect onboard electronic devices.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
|
Axiomatic Isolated 24VDC/24VDC Converter
|
AX081530
|
Purchase
|
Datasheets
|
-
|
AX081530K
(with 2mm cable)
|
Purchase
|
Protocol Converters
2 SAE J1939, SAE J1587
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
Protocol Converter,
2 SAE J1939, SAE J1587
|
AX140400
|
Buy Now
|
Datasheet
|
Operator Input Devices
New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power from 2 independent power supplies and output voltages between 0 & 5 V and 0 & 2.5 V. We also sell a connector kit for developing a harness that fits your needs. We have both firewall and floor mounted models.
| Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
|
EFP-136-01
|
Please contact sales
|
-
|
Schematics
|
Electronic Throttle Cable
The EVR-001 provides engine speed adjustment on electronically controlled stationary engines or from a remote operating position on mobile equipment. the large (2-1/4") knob provides continuous engine speed regulation from idle to wide open in seven full turns. the EVR-001 is easily installed in limited space.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
Electronic Throttle Cable
|
EVR-001
|
Buy Now
|
Datasheet
|
Digital Keypads
4 Position Keypad
| Picture
|
Product Name
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
|
Powerkey Pro 4 Position CAN, Deutch Conn.
|
KEYPAD-DS-004-02
|
Please contact sales
|
-
|
-
|
8 Position Keypad
This standard keypad allows a designer to build a semi-custom system for a minimal cost. Each keypad is made from extremely high-quality and rugged silicone that can be laser etched with specified button legends, text or company logos. Communication protocols include RS485, J1030/J1939-11, CANopen and others.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
|
8-Position CAN Keypad
|
KEYPAD-DS-008-02
|
Purchase
|
Datasheet
|
-
|
11 Switch Keypad
The 11 switch keypads is a CAN input output device for vehicle multiplexing. It can not only output user action, but can be configured via CAN messages.
Template:KEYPAD-011-00
Specialty IO Modules
4 Channel Strain Gauge to CAN Controller
The 4 Channel Strain Gauge CAN controller accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/- 19.5 mV to +/- 2.5 Vdc. It interfaces with the machine’s CAN network (SAE J1939). The measurement rate is 2.5 scans per second and the update rate is 400 ms for all 4 channels. Standard embedded software is provided. Rugged IP67 rated packaging and a power supply input of 12Vdc or 24Vdc nominal suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant®.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
4 Channel Strain Gauge to CAN Controller
SAE J1939
|
AX200000
|
Please contact sales
|
Datasheet
|
J1772 Vehicle Power Interface Module (VPIM)
The J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with Electric or plug-in Hybrid Electric vehicle charging equipment in accordance with the SAE J1772 specifications. It allows the vehicle systems and ECUs that require a low current "sleep" mode to be managed externally and monitors the inputs, providing an output that will drive an external "Wake Up" relay which, in turn, provides power to the connected systems.
PWM to Analog Converter (Pedal Emulator)
The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The
converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
PWM to Analog Converter
(Pedal Emulator)
|
PWM-AN-024-1403
|
Buy Now
|
Datasheet
More Details
|
Electronic Assistant
The Electronic Assistant® is a software configuration tool that runs on the Windows operating
system and is connected to a J1939 bus via an USB to CAN converter, AX070501. Upon being
connected to the bus, the EA will find all IO Devices on the bus and recognize those
manufactured by Axiomatic. Using this tool, a user can quickly configure an Axiomatic IO device for the
desired performance over a wide variety of applications.
| Picture
|
Product Name
|
Part Number
|
Webstore
|
More Information
|
|
|
Electronic Assistant
|
AX070502
|
Buy Now
|
Please contact sales
|
Electronic Assistant and Canopen
Axiomatic offers CANopen ready modules that do not require the Axiomatic Electronic Assistant software configuration tool.
The parameters in Axiomatic CANopen products can be read or written through any standard CANopen
tool that can access an ECU's Object Dictionary. In addition to the User Manual, Axiomatic also provides
Electronic Data Sheets (EDS) with all their CANopen ECUs, as per the standard "CiA DSP 306
V1.3, Electronic Data Sheet Specification for CANopen (EDS).
Axiomatic User Manuals
To view detailed user manuals for axiomatic products click here
Password: trillium
Discontinued Products
| Picture
|
Product Name
|
Part Number
|
Replacement
|
|
10 ANALOG INPUT MODULE, SAE J1939
|
AX030100
|
AX030120
|
|
|
10 ANALOG INPUT MODULE, CANOPEN
|
AX030101
|
AX030121
|
|
