IO Devices: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
 
(212 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{|
 
|style = "width:850px;"|
==Introduction ==
==Introduction ==
New Eagle carries or can build or CAN source Input / Output (IO) devices for your application.  Please read below about current offerings or [http://neweagle.net/contact.html contact sales] to discuss your needs.
New Eagle carries or can build or source Input/Output (I/O) devices for your application.  Please read below about current offerings or contact '''[http://neweagle.net/contact/ sales]''' to discuss your needs.
 
Datasheet or user manual not available? Check out the '''[[Other_Datasheets|Additional Downloads]]''' or please visit our '''[https://support.neweagle.net/support/home Support Portal]'''.


==System Input Modules==
==System Input Modules==


===1 Universal Signal Input to CAN===
===1 Universal Signal Input to CAN===
{|
 
The 1 Universal Signal Input Module measures 1 universal signal input (Voltage, Current, Resistive, Digital, Frequency, or PWM) and outputs the value over CAN.  This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.
The 1 Universal Signal Input Module measures one universal signal input (Voltage, Current, Resistive, Digital, Frequency, or PWM) and outputs the value over CAN.  This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 16: Line 17:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
Line 24: Line 26:
AX030530
AX030530
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules/1-analog-signal-input-to-can-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/1-analog-signal-input-to-can-sae-j1939/ Purchase]'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#1_Universal_Signal_Input_to_CAN | Datasheet]]'''
'''[[System_Input_Modules_Downloads#1_Universal_Signal_Input_to_CAN | Datasheet]]'''
|style = "height:150px;"|
'''-'''
|-
|-
|[[File:AX030530.JPG|180px]]
|[[File:AX030530.JPG|180px]]
Line 37: Line 41:
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#1_Universal_Signal_Input_to_CAN | Datasheet]]'''
'''[[System_Input_Modules_Downloads#1_Universal_Signal_Input_to_CAN | Datasheet]]'''
|style = "height:150px;"|
'''-'''
|}
|}


===10 Universal Signal Input to CAN===
===10 Universal Signal Input to CAN===


The 10 Universal Signal Input Module measures up to 10 analog inputs (0-5V, 0-20 mA or 4-20 mA) for connection to a variety of analog machine sensors or levers and sends the data to a CAN network. The user can also select multiple PWM or frequency inputs as well as a counter input. An active high digital input is another user selectable input.
The 10 Universal Signal Input Module measures up to 10 analog inputs (0-5V, 0-20mA or 4-20mA) for connection to a variety of analog machine sensors or levers and sends the data to a CAN network. The user can also select multiple PWM or frequency inputs as well as a counter input. An active high digital input is another user-selectable input.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
Line 49: Line 55:
!scope="col"|Part Number             
!scope="col"|Part Number             
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|More Information
!scope="col"|Downloads
!scope="col" style = "width:180px;"|More Information


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 57: Line 64:
|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''10 Universal Signal Input<br>CAN Controller'''<br>CANopen
'''10 Universal Signal Input<br>CAN Controller'''<br>SAE J1939


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
AX030120<br>
AX030120<br>
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/10-analog-input-module-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/10-analog-input-module-sae-j1939-500kbps/ Purchase]'''


|style = "height:150px; width:180px;" rowspan="5"|
|style = "height:150px; width:180px;" rowspan="5"|
'''[[System_Input_Modules_Downloads#10_Universal_Signal_Input_to_CAN | Datasheets]]'''
'''[[System_Input_Modules_Downloads#10_Universal_Signal_Input_to_CAN | Datasheets]]'''
|style = "height:150px;" rowspan="5"|
'''-'''


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''10 Universal Signal Input<br>CAN Controller'''<br>CANopen,<br>500 kbps
'''10 Universal Signal Input<br>CAN Controller'''<br>SAE J1939,<br>500 kbps


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
AX030120-01
AX030120-01
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/10-analog-input-module-sae-j1939-500kbps.html Buy Now]'''
'''Please contact [mailto:sales@neweagle.net sales]'''
 


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''10 Universal Signal Input<br>CAN Controller'''<br>CANopen,<br>1 Mbps
'''10 Universal Signal Input<br>CAN Controller'''<br>SAE J1939,<br>1 Mbps


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
Line 85: Line 94:
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
'''Please contact [mailto:sales@neweagle.net sales]'''


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''10 Universal Signal Input<br>CAN Controller'''<br>CAN (SAE J1939)
'''10 Universal Signal Input<br>CAN Controller'''<br>CANOpen


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
Line 95: Line 103:


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/10-analog-input-module-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/10-analog-input-module-canopen/ Purchase]'''
 


|}
|}


===18 Digital inputs Input to CAN===
===18 Digital Signal Input to CAN===


The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, Frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electroni control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant®.
The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electronic control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24VDC power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
Line 110: Line 117:
!scope="col"|Part Number             
!scope="col"|Part Number             
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|More Information
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:150px; width:180px;" rowspan="5"|
|style = "height:150px; width:180px;" rowspan="5"|
Coming Soon
[[File:AX030310-01.PNG|180px]]


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 123: Line 131:
AX030310-01
AX030310-01
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/18-digital-inputs-sae-j1939-500-kbps.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/18-digital-inputs-sae-j1939-500-kbps/ Purchase]'''


|style = "height:150px; width:180px;" rowspan="5"|
|style = "height:150px; width:180px;" rowspan="5"|
'''[[System_Input_Modules_Downloads#18_Digital_inputs_Input_to_CAN | Datasheets]]'''
'''[[System_Input_Modules_Downloads#18_Digital_inputs_Input_to_CAN | Datasheets]]'''
|rowspan = "5"|
'''-'''


|-style="vertical-align:middle;"
|-style="vertical-align:middle;"
Line 148: Line 159:
|}
|}


===20 Channel Thermocouple Scanner===
===20-Channel Thermocouple Scanner===


The Thermocouple Scanner monitors up to 20 thermocouple channels and the temperature information is provided to the engine control system over J1939(AXTC20) OR CANopen®(AXTC20CO). The scanner can flag low temperature warnings, high temperature warnings, or high temperature shutdowns to the engine control system. It will also detect and indicate open circuits on the sensor wires. Temperature is measured in ºC, with a 0.001ºC resolution. The Scanner is available in CANopen or J1939 CAN communication standards.  
The Thermocouple Scanner monitors up to 20 thermocouple channels and the temperature information is provided to the engine control system over J1939 (AX185000) or CANopen (AX185001). The scanner can flag low temperature warnings, high temperature warnings or high temperature shutdowns to the engine control system. It will also detect and indicate open circuits on the sensor wires. Temperature is measured in °C, with a 0.001°C resolution. The scanner is available in CANopen or J1939 CAN communication standards.  


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
Line 158: Line 169:
!scope="col"|Part Number             
!scope="col"|Part Number             
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col"|More Information
!scope="col"|More Information


Line 166: Line 178:
|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''Thermocouple Scanner'''<br>20 Thermocouple Channels<br>CAN, SAE J1939
'''Thermocouple Scanner'''<br>20 Thermocouple Channels<br>CAN (SAE J1939)


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
AXTC20
AX185000


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/20-channel-thermocouple-module-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/20-channel-thermocouple-module-sae-j1939// Purchase]'''


|style = "height:125px; width:180px;" rowspan="3"|
|style = "height:125px; width:180px;" rowspan="3"|
'''[[System_Input_Modules_Downloads#20_Channel_Thermocouple_Scanner|Datasheets]]'''
'''[[System_Input_Modules_Downloads#20_Channel_Thermocouple_Scanner|Datasheets]]'''
|style = "width:180px;" rowspan="5"|
'''-'''


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 182: Line 197:


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
AXTC20CO
AX185001
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/20-thermocouple-scanner-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/20-channel-thermocouple-module-sae-j1939// Purchase]'''
|}
|}


===RTD Scanner===
===RTD Scanner===


The RTD Scanner monitors up to 8 channels of several types of RTDs. The temperature information is provided to an engine control system over a SAE J1939 or CANopen bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All 8 channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity and the RTD inputs are isolated from each other. The RTD temperature monitoring control features rugged packaging and watertight Deutsch IPD connectors. Applications include power generator sets.
The RTD Scanner monitors up to eight channels of several types of RTDs. The temperature information is provided to an engine control system over an SAE J1939 or CANopen bus. Temperature information can include exhaust temperature, winding temperature and fluid temperature monitoring. All eight channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity and the RTD inputs are isolated from each other. The RTD temperature monitoring control features rugged packaging and watertight Deutsch IPD connectors. Applications include power generator sets.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
Line 197: Line 212:
!scope="col"|Part Number             
!scope="col"|Part Number             
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|More Information
!scope="col"|Downloads
!scope="col" style = "width:180px;"|More Information


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 205: Line 221:
|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
'''RTD Scanner'''<br>CAN, SAE J1939
'''RTD Scanner'''<br>CAN (SAE J1939)


|style = "height:125px; width:180px;"|
|style = "height:125px; width:180px;"|
Line 215: Line 231:
|style = "height:125px; width:180px;" rowspan="3"|
|style = "height:125px; width:180px;" rowspan="3"|
'''[[System_Input_Modules_Downloads#RTD_Scanner|Datasheets]]'''
'''[[System_Input_Modules_Downloads#RTD_Scanner|Datasheets]]'''
|style = "width180px;" rowspan = "3"|
'''-'''


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 226: Line 245:
|}
|}


===4 Channel Thermocouple to CAN===
===4-Channel Thermocouple to CAN===


The Thermocouple Module monitors up to 4 channels of Type J, K or T thermocouples (others on request).
The Thermocouple Module monitors up to four channels of Type J, K or T thermocouples (others on request).


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 236: Line 255:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:AXTC4.jpg|160px]]
|[[File:AXTC4.jpg|160px]]
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''Thermocouple Module <br>4 Channel'''<br> CAN (SAE J1939)'''
'''Thermocouple Module <br>4-Channel'''<br> CAN (SAE J1939)'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
AXTC4
AXTC4
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[http://store.neweagle.net/4-channel-thermocouple-to-can-j1939.html  Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/4-channel-thermocouple-to-can-j1939/ Purchase]'''
|style = "height:150px; width:180px;" rowspan = "3"|
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#4_Channel_Thermocouple_to_CAN|Datasheet]]'''
'''[[System_Input_Modules_Downloads#4_Channel_Thermocouple_to_CAN|Datasheets]]'''
 
|style = "width:180px;"|
'''-'''


|-
|[[File:AXTC4CO.gif|160px]]
|style = "height:150px; width:180px;"|
'''Thermocouple Module <br>4 Channel'''<br> CANopen'''
|style = "height:150px; width:180px;"|
AXTC4CO
|style = "height:150px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|}
|}


Line 261: Line 276:
{|style =
{|style =


Converts a Magnetic speed sensor signal into SAE J1939 CAN Messages for communication with control systems.
Converts a magnetic speed sensor signal into SAE J1939 CAN messages for communication with control systems.


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 269: Line 284:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
Line 277: Line 293:
AX031500
AX031500
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[http://tinyurl.com/hk7w9jv Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/magnetic-pick-up-can-converter-sae-j1939/ Purchase]'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#Magnetic_Pick-Up_Sensor_to_CAN_Converter_.28SAE_J1939.29|Datasheet]]'''
'''[[System_Input_Modules_Downloads#Magnetic_Pick-Up_Sensor_to_CAN_Converter_.28SAE_J1939.29|Datasheet]]'''
|
'''-'''
|}
|}


===Dual Universal Signal Converter===
===Isolated Signal Converter with CAN===
{|style =
{|style =


The dual universal signal converter accepts two voltage, current, resistive, frequency, RPM, PWM or digital control signal inputs and converts them into two signal outputs (analog voltage, analog current or digital signal). The control can be networked to a SAE J1939 networked engine control system. The outputs are isolated from the inputs. The CAN bus port is isolated from both inputs and outputs.  
A two-channel signal converter with isolation and CAN bus, this product is designed for diesel engine control systems, industrial automation, vehicle automation and machine control integration. The signal converter accepts two analog current or voltage signals, resistive or digital inputs, PWM or frequency/RPM inputs and converts them into two analog, PWM, frequency or digital signal outputs. A +5V reference powers sensor inputs. The unit has 4-way isolation between power, inputs, outputs and CAN. The I/O control includes CAN bus automation for SAE J1939 12VDC or 24VDC control systems or CANopen networks. It can be installed in control panels, industrial control automation systems, power generator set control systems, off-highway equipment, construction machines and test equipment.


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 293: Line 311:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:AX130500.jpg|150px]]
|[[File:AX130510.png|150px]]
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''Dual Universal Signal Converter'''
'''Isolated Signal Converter with CAN'''<br>SAE J1939
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
AX130500
AX130510
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/2-universal-signal-inputs-2-signal-outputs-sae-j1939.html  Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/isolated-signal-converter-with-can-sae-j1939/ Purchase]'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#Dual_Universal_Signal_Converter|Datasheet]]'''
'''[[System_Input_Modules_Downloads#Isolated_Signal_Converter_with_CAN|Datasheet]]'''
|
'''-'''
|}
|}


===Isolated Signal Converter with CAN===
===16 Analog I/O Module===
{|style =
{|style =


A two channel signal converter with isolation and CAN bus is designed for diesel engine control systems, industrial automation, vehicle automation, and machine control integration. The signal converter accepts two analog current or voltage signals, resistive or digital inputs, PWM or frequency/RPM inputs and converts them into 2 analog, PWM, frequency or digital signal outputs. A +5V reference powers sensor inputs. The unit has 4-way isolation between power, inputs, outputs and CAN. The I/O control includes CAN bus automation for SAE J1939 12Vdc or 24Vdc control systems or CANopen networks. It can be installed in control panels, industrial control automation systems, power generator set control systems, off-highway equipment, construction machines, and test equipment.
The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features one CAN port for user-defined communications over the bus. It accepts up to eight analog (0-5V, 0-10V, 0-20mA or 4-20mA) or digital or PWM frequency inputs and provides eight analog outputs (0-5V, 0-10V, +/-5V, +/-10V, 0-20mA, 4-20mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.  


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 317: Line 338:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:AX130510.png|150px]]
|[[File:AX030200.gif|150px]]
|style = "height:150px; width:180px;"|
'''16 Analog I/O Module'''<br>SAE J1939
|style = "height:150px; width:180px;"|
AX030200
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/shop/products/input-output-devices/8-universal-signal-inputs-8-analog-outputs-sae-j1939/ Purchase]'''
|style = "height:150px; width:180px;" rowspan="3"|
'''[[System_Input_Modules_Downloads#16_Analog_I.2FO_Module|Datasheets]]'''
|rowspan = "3"|
'''-'''
 
|-
|[[File:AX030201.gif|150px]]
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''Isolated Signal Converter with CAN'''<br>SAE J1939
'''16 Analog I/O Module'''<br>CANopen
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
AX130510
AX030201
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#Isolated_Signal_Converter_with_CAN|Datasheet]]'''
|}
|}


===16 Analog I/O Module===
===4-Channel Strain Gauge to CAN Controller===
{|style =
 
The 4-Channel Strain Gauge CAN controller accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/- 19.5mV to +/- 2.5VDC.  It interfaces with the machine’s CAN network (SAE J1939). The measurement rate is 2.5 scans per second and the update rate is 400ms for all four channels. Standard embedded software is provided.  Rugged IP67 rated packaging and a power supply input of 12VDC or 24VDC nominal suits applications in the harsh environment of mobile equipment with on-board battery power.  All setpoints are user configurable using the Electronic Assistant.
 
{| class="wikitable" style="text-align: center;" cellpadding = "5"
 
!scope="col" style = "width:180px;"|Picture
!scope="col" style = "width:180px;"|Product Name
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|[[File:AX200000.png|150px]]
 
|style = "height:160px;"|
'''4-Channel Strain Gauge to CAN Controller'''<br>SAE J1939
 
|style = "height:150px;"|
AX200000
 
|style = "height:150px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:150px;"|
'''[[Other_IO_Devices_Downloads#4_Channel_Strain_Gauge_to_CAN_Controller | Datasheet]]'''
|
'''-'''
 
|}
 
===Connector Amplifier for Proportional Valves – DIN 43650A===
 
(0-10V input, 1.2A output, 2m grey cable, IP65)
 
The connector amplifier supplies a solenoid valve with current proportional to an input control (0-10VDC or 0-20mA).  Application: Accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile construction equipment and industrial processes.
 
{| class="wikitable" style="text-align: center;" cellpadding = "5"
 
!scope="col" style = "width:180px;"|Picture
!scope="col" style = "width:180px;"|Product Name
!scope="col" style = "width:200px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|[[File:Admin-ajax (002).jpg|150px]]
 
|style = "height:160px;"|
'''Connector Amplifier <br>for Proportional Valves<br> DIN 43650A'''
 
|style = "height:150px;"|
AX-CAPV-H-10V-1.2A-6C-2M
 
|style = "height:150px;"|
'''[https://store.neweagle.net/shop/products/input-output-devices/connector-amplifier-for-proportional-valves-10v-din-43650a/ Purchase]'''
|style = "height:150px;"|
'''[https://wiki.neweagle.net/ProductDocumentation/Input_Output_Devices/System_Input_Modules/TD1108AX_DataSheet.pdf Datasheet]'''
|
'''-'''
|}
 
===GPS Receiver - CAN J1939===


The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features 1 CAN port for user-defined communications over the bus. It accepts up to 8 analog (0-5V, 0-10V, 0-20 mA or 4-20 mA) or digital or PWM frequency inputs and provides 8 analog outputs (0-5V, 0- 10V, +/-5V, +/-10V, 0-20 mA, 4-20 mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.  
The GPS Receiver – J1939 is a fast update GPS that outputs J1939 data. Its update time is only 0.1 seconds, and it is extremely accurate at capturing position, velocity and time.  


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 341: Line 434:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:AX030200.gif|150px]]
|[[File:GPS Reciever.jpg|150px]]
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''16 Analog I/O Module'''<br>SAE J1939
'''GPS Receiver CAN J1939 - 250 Baud'''<br>
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
AX030200
GPS-REC-J1939-001
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/8-universal-signal-inputs-8-analog-outputs-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/displays-gauges/gauges-displays-gauges/gps-receiver-can-j1939/ Purchase]'''
|style = "height:150px; width:180px;" rowspan="3"|
|style = "height:150px; width:180px;" rowspan="3"|
'''[[System_Input_Modules_Downloads#16_Analog_I.2FO_Module|Datasheets]]'''
'''[https://wiki.neweagle.net/ProductDocumentation/Input_Output_Devices/System_Input_Modules/GPS-REC-J1939_DataSheet.pdf Datasheet]'''
|rowspan = "3"|
'''-'''


|-
|-
|[[File:AX030201.gif|150px]]
|[[File:GPS Reciever.jpg|150px]]
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''16 Analog I/O Module'''<br>CANopen
'''GPS Receiver CAN J1939 - 500 Baud'''<br>
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
AX030201
GPS-REC-J1939-002
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
'''[https://store.neweagle.net/shop/products/displays-gauges/gauges-displays-gauges/gps-receiver-can-j1939-500-baud/ Purchase]'''
|}
|}


Line 367: Line 463:
===CM0410 Input Output Module===
===CM0410 Input Output Module===


The CM0410 is a general purpose input / output controller that includes a single J1939 CAN interface, 4 inputs, 1 high side current measurement pass-through, and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus. The CM0410 is a CAN slave module only and supports no standalone operation.
The CM0410 is a general-purpose input/output controller that includes a single J1939 CAN interface, four inputs, one high-side current measurement pass-through and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus. The CM0410 is a CAN slave module only and supports no standalone operation.


{| class="wikitable" style="text-align: center;" cellpadding = "5"   
{| class="wikitable" style="text-align: center;" cellpadding = "5"   
Line 376: Line 472:
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:CM0410.png|180px]]
|[[File:CM0410.png|180px]]
Line 383: Line 480:
CM0410
CM0410
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules/slave-can-module-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/slave-can-module-j1939/ Purchase]'''
|
'''-'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Output_Modules_Downloads#CM0410_Input_Output_Module|Datasheet]]'''
'''[[CM0410|More Details]]'''
|}
|}


Line 397: Line 496:
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:AX030520.gif|180px]]
|[[File:AX030520.gif|180px]]
Line 404: Line 504:
AX030520
AX030520
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/system-output-modules/can-to-1-analog-signal-output-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/can-to-1-analog-signal-output-sae-j1939/ Purchase]'''
|style = "height:150px; width:180px;" rowspan = "3"|
|style = "height:150px; width:180px;" rowspan = "3"|
'''[[System_Output_Modules_Downloads#CAN_Analog_Signal_Output_Controllers|Datasheets]]'''
'''[[System_Output_Modules_Downloads#CAN_Analog_Signal_Output_Controllers|Datasheets]]'''
|rowspan = "3"|
'''-'''


|-
|-
Line 415: Line 517:
AX030521
AX030521
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/system-output-modules/can-to-1-analog-signal-output-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/can-to-1-analog-signal-output-canopen/ Purchase]'''
|}
|}


Line 426: Line 528:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
Line 434: Line 537:
AX031200
AX031200
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/11-9-can-controller-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/11-9-can-controller-sae-j1939/ Purchase]'''
|style = "height:150px; width:180px;" rowspan = "3"|
|style = "height:150px; width:180px;" rowspan = "3"|
'''[[System_Output_Modules_Downloads#11:9_CAN_Controllers | Datasheets]]'''
'''[[System_Output_Modules_Downloads#11:9_CAN_Controllers | Datasheets]]'''
|rowspan = "3"|
'''-'''


|-
|-
Line 445: Line 550:
AX031201
AX031201
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/system-input-modules/11-9-can-controller-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/11-9-can-controller-canopen/ Purchase]'''
|}
|}


===CAN to 10 Output Valve Controller===
===CAN to 10 Output Valve Controller===
Available in 12, 24 and 48 volt operating input power modules, this durable CAN controlled output controller is capable of providing 10 universal outputs at up to 2.5 amps or 7 amps for the whole module. Applications include proportional valves, hotshot control profiles, PWM signals, and on/off valves. Settings may be user configured via windows based electronic assistant.
Available in 12V, 24V and 48V operating input power modules, this durable CAN-controlled output controller is capable of providing 10 universal outputs at up to 2.5A or 7A for the whole module. Applications include proportional valves, hotshot control profiles, PWM signals and on/off valves. Settings may be user configured via Windows-based Electronic Assistant.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
Line 458: Line 563:
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col"|Downloads
!scope="col" style = "width:180px;"|More Information


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 470: Line 576:
AX021210
AX021210
|style = "height:115px; width:180px;"|
|style = "height:115px; width:180px;"|
'''[http://store.neweagle.net/can-to-10-output-valve-controller-j1939.html Buy Now]'''
'''Please contact [mailto:sales@neweagle.net sales]'''


|style = "height:115px; width:180px;" rowspan="4"|
|style = "height:115px; width:180px;" rowspan="4"|
'''[[System_Output_Modules_Downloads#CAN_to_10_Output_Valve_Controller|Datasheets]]'''
'''[[System_Output_Modules_Downloads#CAN_to_10_Output_Valve_Controller|Datasheets]]'''
|rowspan = "4"|
'''-'''


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 482: Line 591:
AX021210-01
AX021210-01
|style = "height:115px; width:180px;"|
|style = "height:115px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-input-output-modules-1/can-to-10-output-valve-controller-j1939-500kbps.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/can-to-10-output-valve-controller-j1939-500kbps/ Purchase]'''


|- style="vertical-align:middle;"
|- style="vertical-align:middle;"
Line 492: Line 601:


|style = "height:115px; width:180px;"|
|style = "height:115px; width:180px;"|
'''[http://store.neweagle.net/can-to-10-output-valve-controller-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/can-to-10-output-valve-controller-canopen/ Purchase]'''
 


|}
|}


===CAN (J1939) to 4 Channel Analog Output===
===CAN (J1939) to 4-Channel Analog Output===


The IO device belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.
The IO device belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 508: Line 616:
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:4 Analog Signal Outputs CAN Controller with Electronic Assistant.jpg|150px]]
|[[File:4 Analog Signal Outputs CAN Controller with Electronic Assistant.jpg|150px]]


|style = "height:160px;"|
|style = "height:160px;"|
'''CAN to 4 Channel <br>Analog Output Device'''<br>250 kbps <br>(SAE J1939)
'''CAN to 4-Channel <br>Analog Output Device'''<br>250 kbps <br>(SAE J1939)
   
   
|style = "height:150px;"|
|style = "height:150px;"|
Line 518: Line 627:


|style = "height:150px;"|
|style = "height:150px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-output-modules/can-to-4-analog-output-controller-sae-j1939.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/can-to-4-analog-output-controller-sae-j1939-250-kbps/ Purchase]'''
|style = "height:150px;" rowspan = "3"|
|style = "height:150px;" rowspan = "3"|
'''[[System_Output_Modules_Downloads#CAN_.28J1939.29_to_4_Channel_Analog_Output|Datasheets]]'''
'''[[System_Output_Modules_Downloads#CAN_.28J1939.29_to_4_Channel_Analog_Output|Datasheets]]'''
|rowspan = "3"|
'''-'''
|-
|-
|[[File:4 Analog Signal Outputs CAN Controller with Electronic Assistant.jpg|150px]]
|[[File:4 Analog Signal Outputs CAN Controller with Electronic Assistant.jpg|150px]]
Line 534: Line 646:
|}
|}


===CANopen to 4 Channel Analog Outputs===
===CANopen to 4-Channel Analog Outputs===


The 4 Analog Signal Outputs CAN IO device belongs to a family of Axiomatic user-customizable smart controllers. The programmable internal architecture provides users with an ultimate flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using any commercially available CANopen® tools.
The 4-Channel Analog Signal Outputs CAN IO device belongs to a family of Axiomatic user-customizable smart controllers. The programmable internal architecture provides users with an ultimate flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using any commercially available CANopen tools.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 544: Line 656:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
Line 549: Line 662:
[[File:4_Analog_Signal_Outputs_with_CANopen_Controller.jpg|120px]]
[[File:4_Analog_Signal_Outputs_with_CANopen_Controller.jpg|120px]]


|'''CANopen to 4 Analog <br>Signal Outputs Device'''
|'''CANopen to 4-Channel Analog Signal Outputs Device'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
AX030501
AX030501
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-output-modules/can-to-4-analog-output-controller-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/can-to-4-analog-output-controller-canopen/ Purchase]'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[System_Output_Modules_Downloads#CANopen_to_4_Channel_Analog_Outputs|Datasheet]]'''
'''[[System_Output_Modules_Downloads#CANopen_to_4_Channel_Analog_Outputs|Datasheet]]'''
|
'''-'''
|}
|}


===TC/Analog Input of CAN Controller===
===TC/Analog Input of CAN Controller===


The TC/Analog Inputs to CAN Controller receives inputs from engine coolant, fuel and differential pressure sensors, engine temperature sensors, thermistors as well as thermocouples and is networked to a SAE J1939 based control system. Seven +5V references (10 mA) are provided to power the sensors. The 2 CAN ports are isolated from signal inputs and thermocouple inputs.  
The TC/Analog Inputs to CAN Controller receives inputs from engine coolant, fuel and differential pressure sensors, engine temperature sensors, thermistors as well as thermocouples and is networked to an SAE J1939 based control system. Seven +5V references (10mA) are provided to power the sensors. The two CAN ports are isolated from signal inputs and thermocouple inputs.  


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 568: Line 683:
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
!scope="col" style = "width:180px;"|More Information
|-
|-
Line 574: Line 690:
|'''TC/Analog Input of CAN Controller'''
|'''TC/Analog Input of CAN Controller'''
|style = "height:130px; width:180px;"|
|style = "height:130px; width:180px;"|
AX18100
AX181000
|style = "height:130px; width:180px;"|
|style = "height:130px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/system-output-modules/can-to-4-analog-output-controller-canopen.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/tc-analog-input-to-can-controller/ Purchase]'''
|style = "height:130px; width:180px;"|
|style = "height:130px; width:180px;"|
'''[[System_Output_Modules_Downloads#TC.2FAnalog_Input_of_CAN_Controller | Datasheet]]'''
'''[[System_Output_Modules_Downloads#Thermocouple.2FAnalog_Input_of_CAN_Controller | Datasheet]]'''
|'''-'''


|- style = "height:50px; width:180px;" rowspan="2"|
|- style = "height:50px; width:180px;" rowspan="2"|


|Connector Kit
|'''Connector Kit'''
|style = "height:50px; width:180px;"|
|style = "height:50px; width:180px;"|
AX070123
AX070123
|style = "height:50px; width:180px;"|
|style = "height:50px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/system-output-modules/mating-plug-kit-for-tc-analog-inputs-ot-can-controller-ax181000.html Buy Now]'''
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:50px; width:180px;"|
|style = "height:50px; width:180px;"|
--
'''-'''
|'''-'''
|}
|}


===CAN Enabled Current Driver===
===CAN Enabled Current Driver===


The Single 5 amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU.  this is a customizable solution that allows for custom logic or the use as a simple CAN based slave.  Configuration and Service tools are available.
The Single 5-amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU.  This is a customizable solution that allows for custom logic or the use as a simple CAN-based slave.  Configuration and service tools are available.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 601: Line 719:
!scope="col"|Part Number
!scope="col"|Part Number
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col"|More Information
!scope="col"|More Information
|-
|-
Line 610: Line 729:


|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
''(Custom)''<br>Please contact [mailto:sales@neweagle.net sales]
''(Custom)''<br>'''Please contact [mailto:sales@neweagle.net sales]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Built upon the  
Built upon the  
<br>'''[http://www.neweagle.net/support/wiki/index.php?title=Controllers#ECM-S12-24_.28SECM.29 ECM S12-24]''' <br>or the <br>'''[http://www.neweagle.net/support/wiki/index.php?title=Controllers#ECM-563-48_.28ECM48.29 ECM 563-48]
<br>'''[[Controllers#ECM-S12-24_.28SECM24.29| ECM-S12-24]]''' <br>or the <br>'''[[Controllers#ECM-563-48_.28ECM48.29| ECM-563-48]]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
--
'''-'''
|style = "width:180px;"|
'''-'''
|}
|}


===Multiplexed Power Distribution Module (MPDM)===
===Multiplexed Power Distribution Module (MPDM)===


The New Eagle™ Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages.
The New Eagle Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CANopen messages.
{{MPDM-NE1}}
{{MPDM-NE1}}


===Axiomatic===
===DC-DC Converter===
{{AX081530}}
{{AX081530}}
===High Current H-Bridge Module===
{{HB-30A}}
===CAN Enabled Current Driver===
The Single 5-amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU.  This is a customizable solution that allows for custom logic or the use as a simple CAN-based slave.  Configuration and service tools are available.
{| class="wikitable" style="text-align: center;" cellpadding = "5"
!scope="col" style = "width:180px;"|Picture
!scope="col"|Product Name
!scope="col"|Part Number
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|style = "height:180px; width:180px;"|
[[file:AX-RSD-DR-4-20MA-2A.jpg|150px]]
|style = "height:180px; width:180px;"|
'''Remote Mount Solenoid Driver – DIN Rail Mount'''
|style = "height:180px; width:180px;"|
'''AX-RSD-DR-4-20MA-2A
|style = "height:180px; width:180px;"|
'''[https://store.neweagle.net/shop/products/input-output-devices/remote-mount-solenoid-driver-din-rail-mount/ Purchase]
|style = "height:180px; width:180px;"|
'''[https://www.axiomatic.com/4-20ma-remote-driver.pdf Datasheet]
|'''-'''
|}


==Protocol Converters==
==Protocol Converters==
Line 637: Line 789:
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|-
|[[File:AX140100.jpg|180px]]
|[[File:AX140100.jpg|180px]]
Line 644: Line 797:
AX140400
AX140400
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/products-by-category/input-output-devices/system-input-modules/protocol-converter-2-sae-j1939-sae-j1587.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/protocol-converter-j1587-to-j1939-gateway/ Purchase]'''
|style = "height:150px; width:180px;"|
|style = "height:150px; width:180px;"|
'''[[Other_IO_Devices_Downloads#2_SAE_J1939.2C_SAE_J1587 | Datasheet]]'''
'''[[Other_IO_Devices_Downloads#2_SAE_J1939.2C_SAE_J1587 | Datasheet]]'''
|'''-'''
|}
===LIN to CAN Protocol Converter===
{|
The LIN-CAN Protocol Converter, SAE J1939 exchanges data between a LIN network and a CAN network.  This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.
{| class="wikitable" style="text-align: center;" cellpadding = "5" 


!scope="col" style = "width:180px;"|Picture
!scope="col" style = "width:180px;"|Product Name
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|Downloads
!scope="col" style = "width:180px;"|More Information
|-
|[[File:AX140600.jpg|180px]]
|style = "height:150px; width:180px;"|
'''LIN-CAN Protocol Converter, SAE J1939, Extended, <br>Auto-baud-rate-detect
|style = "height:150px; width:180px;"|
AX140600-03
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/shop/products/input-output-devices/lin-can-protocol-converter-sae-j1939-extended-auto-baud-rate-detect/ Purchase] '''
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#LIN_to_CAN_Protocol_Converter | Datasheet]]'''
|'''-'''
|-
|[[File:AX140600.jpg|180px]]
|style = "height:150px; width:180px;"|
'''LIN-CAN Protocol Converter, SAE J1939, 500kbps Baud Rate
|style = "height:150px; width:180px;"|
AX140600-01
|style = "height:150px; width:180px;"|
'''[https://store.neweagle.net/shop/products/input-output-devices/lin-can-protocol-converter-sae-j1939/ Purchase] '''
|style = "height:150px; width:180px;"|
'''[[System_Input_Modules_Downloads#LIN_to_CAN_Protocol_Converter | Datasheet]]'''
|'''-'''
|}
|}


==Digital Keypads==
==Digital Keypads==


===='''4 Position Keypad'''====
====4-Position Keypad====
Hassle-free control and customization is literally at your fingertips.  The Power Key is reconfigurable, readdressable and relegendable, requiring only a laptop or PC connection.  Its secure-locking inserts (not included in purchase) can be interchanged to match the configuration.
Hassle-free control and customization is literally at your fingertips.  The Power Key is reconfigurable, readdressable and relegendable, requiring only a laptop or PC connection.  Its secure-locking inserts (not included in purchase) can be interchanged to match the configuration.


{{PKP-2200-100}}
{{PKP-2200-100}}


===='''8 Position Keypad'''====
====8-Position Keypad====


This standard keypad allows a designer to build a semi-custom system for a minimal cost.  Each keypad is made from extremely high-quality and rugged silicone that can be laser etched with specified button legends, text or company logos. Communication protocols include RS485, J1030/J1939-11, CANopen and others.
This standard keypad allows a designer to build a semi-custom system for a minimal cost.  Each keypad is made from extremely high-quality and rugged silicone that can be laser etched with specified button legends, text or company logos. Communication protocols include RS485, J1030/J1939-11, CANopen and others.
{{KEYPAD-DS-008-00}}
{{KEYPAD-DS-008-00}}
 
''Note: CAN DBC file available upon request.''
===='''11 Switch Keypad'''====
 
The 11 switch keypads is a CAN input output device for vehicle multiplexing.  It can not only output user action, but can be configured via CAN messages.
{{KEYPAD-011-00}}
 


<!-- This is a comment  
<!-- This is a comment  


<span style="color:#8B0000">'''Keyless Ignition Keypad'''</span>
<span style="color:#8B0000">'''Keyless Ignition Keypad'''</span>
Line 679: Line 862:
!scope="col"|Part Number
!scope="col"|Part Number
!scope="col"|Picture             
!scope="col"|Picture             
!scope="col"|'''Webstore'''
!scope="col"|Webstore
!scope="col"|More Information
!scope="col"|More Information
|-
|-
Line 695: Line 878:


==Specialty IO Modules==
==Specialty IO Modules==
===4 Channel Strain Gauge to CAN Controller===
The 4 Channel Strain Gauge CAN controller accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/- 19.5 mV to +/- 2.5 Vdc.  It interfaces with the machine’s CAN network (SAE J1939). The measurement rate is 2.5 scans per second and the update rate is 400 ms for all 4 channels. Standard embedded software is provided.  Rugged IP67 rated packaging and a power supply input of 12Vdc or 24Vdc nominal suits applications in the harsh environment of mobile equipment with on-board battery power.  All setpoints are user configurable using the Electronic Assistant®.
{| class="wikitable" style="text-align: center;" cellpadding = "5"
!scope="col" style = "width:180px;"|Picture
!scope="col" style = "width:180px;"|Product Name
!scope="col" style = "width:180px;"|Part Number
!scope="col" style = "width:180px;"|Webstore
!scope="col" style = "width:180px;"|More Information
|-
|[[File:AX200000.png|150px]]
|style = "height:160px;"|
'''4 Channel Strain Gauge to CAN Controller'''<br>SAE J1939
|style = "height:150px;"|
AX200000
|style = "height:150px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:150px;"|
'''[[Other_IO_Devices_Downloads#4_Channel_Strain_Gauge_to_CAN_Controller | Datasheet]]'''
|}


===J1772 Vehicle Power Interface Module (VPIM)===
===J1772 Vehicle Power Interface Module (VPIM)===
Line 730: Line 886:


===PWM to Analog Converter (Pedal Emulator)===
===PWM to Analog Converter (Pedal Emulator)===
The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The  
The New Eagle PWM to Analog Converter converts three separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.
converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
!scope="col"|Picture  
!scope="col"|Picture  
!scope="col"|Product Name         
!scope="col"|Part Number          
!scope="col"|Part Number
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col"|More Information
!scope="col"|More Information
|-
|-
Line 743: Line 898:
[[image:PWM-AN-024-1403.PNG|150px]]
[[image:PWM-AN-024-1403.PNG|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''PWM to Analog Converter<br>(Pedal Emulator)'''
PWM-AN-024-1403
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
PWM-AN-024-1403
'''[https://store.neweagle.net/shop/our-markets/electric-hybrid/lv-accessories/pwm-to-analog-converter-w-24-pin-header/ Purchase]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''[http://store.neweagle.net/products-by-category/input-output-devices/specialty-io-modules/pwm-to-analog-converter-w-24-pin-header.html Buy Now]'''
'''[[PWM to Analog Converter#Datasheet|Downloads]]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''[[PWM to Analog Converter|More Details]]'''
'''[[PWM to Analog Converter|More Details]]'''
|}
|}
<!-- .........................................REMOVED 10/12/16 per JD
===Smart KAn Input Module (SKIM)===


The Kongsberg Automotive Smart KAn Input Modules (SKIM) are a family of configurable and expandable input/output (I/O) modules with CAN bus (J1939, NMEA2000) communication. The family include a model with two I/O channels and a larger one with eight. Each I/O channel can be configured with a PC-based tool to be an analog, digital, or frequency input, or a frequency or PWM output.
===DBW PWM to Analog Pedal Emulator===
The New Eagle DBW PWM to Analog Converter is optimized to operate in Drive-By-Wire (DBW) applications. It is designed to take the Raw Analog and Digital signals from the accelerator and brake pedals respectively and either pass the signal through to the OEM ECU or override the signals with commanded PWM signals from the DBW Aftermarket ECU.


{| class="wikitable" style="text-align: center;" cellpadding = "5"
{| class="wikitable" style="text-align: center;" cellpadding = "5"
!scope="col"|Picture
!scope="col"|Picture  
!scope="col"|Product Name          
!scope="col"|Part Number         
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col"|More Information
|-
|style = "height:180px; width:180px;" rowspan="2"|
[[image:PWM-AN-024-1403.PNG|150px]]
|style = "height:90px; width:180px;"|
PWM-DBW-024-2001
|style = "height:180px; width:180px;" rowspan="2"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|style = "height:90px; width:180px;"|
'''[https://wiki.neweagle.net/ProductDocumentation/Input_Output_Devices/Specialty_IO_Modules/PWM-DBW-024-2001_DataSheet.pdf Datasheet]'''
|style = "height:180px; width:180px;" rowspan="2"|
'''[[DBW_PWM_to_Analog_Pedal_Emulator|More Details]]'''
|-
|style = "height:90px;"|
PWM-DBW-024-2002
|style = "height:90px;"|
'''[https://wiki.neweagle.net/ProductDocumentation/Input_Output_Devices/Specialty_IO_Modules/PWM-DBW-024-2002_DataSheet.pdf Datasheet]'''
|}
 
=== LVDT Simulator for LVDT or RVDT Sensors ===
The LVDT Simulator is used to test LVDT or RVDT sensors. Using a 0-10VDC command signal input and an excitation (drive input), the unit provides two simulation outputs of 1-5VAC. An internal 3kHz oscillator can be utilized as an alternative excitation source. Both outputs are fully isolated. The unit accepts power supply input from 4-32VDC. When the input voltage increases from 0 to 10VDC, the output voltage A increases from 1 to 5VAC and the output voltage B decreases from 5 to 1VAC. Factory settings for the offset (minimum) and span (maximum) are user adjustable. A LED indicates power is ON. The unit is conformal coated and available in a DIN rail mount housing.
 
{| class="wikitable" style="text-align: center;" cellpadding = "5"
!scope="col"|Picture          
!scope="col"|Part Number
!scope="col"|Part Number
!scope="col"|Webstore
!scope="col"|Webstore
!scope-"col"|Downloads
!scope="col"|More Information
!scope="col"|More Information
|-
|-
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
[[File:SKIM.JPG|150px]]
[[image:LVDTS-DR-03.jpg|150px]]
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''Smart KAn Input Module (SKIM)'''
AX-LVDTS-DR-03
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
SKIM-02-01
'''[https://store.neweagle.net/shop/products/input-output-devices/ax-lvdts-dr-03/ Purchase]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
Please [http://neweagle.net/contact.html '''Contact Sales]'''
'''[https://wiki.neweagle.net/ProductDocumentation/Input_Output_Devices/Specialty_IO_Modules/LVDTS-DR-03_DataSheet.pdf Datasheet]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''[[Smart KAn Input Module|More Details]]'''
'''-'''
|}-->
|}


==Electronic Assistant==
==Electronic Assistant==
The Electronic Assistant® is a software configuration tool that runs on the Windows operating  
The Electronic Assistant® is a software configuration tool that runs on the Windows operating system and is connected to a J1939 bus via a USB to CAN converter, AX070501. Upon being connected to the bus, the EA will find all IO devices on the bus and recognize those manufactured by Axiomatic. Using this tool, a user can quickly configure an Axiomatic IO device for the desired performance over a wide variety of applications.
system and is connected to a J1939 bus via an USB to CAN converter, AX070501. Upon being  
connected to the bus, the EA will find all IO Devices on the bus and recognize those  
manufactured by Axiomatic. Using this tool, a user can quickly configure an Axiomatic IO device for the  
desired performance over a wide variety of applications.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  


!scope="col"|Picture
!scope="col"|Picture     
!scope="col"|Product Name    
!scope="col"|Part Number
!scope="col"|Part Number
!scope="col"|Webstore
!scope="col"|Webstore
!scope="col"|Downloads
!scope="col"|More Information
!scope="col"|More Information
|-
|-
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
[[File:Ax070502_electronic_assistant-e_1.jpg‎|150px]]
[[File:Ax070502_electronic_assistant-e_1.jpg‎|150px]]
|style = "height:180px; width:180px;"|
'''Electronic Assistant'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
AX070502
AX070502
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
'''[http://store.neweagle.net/axiomatic-electronic-assistant.html Buy Now]'''
'''[https://store.neweagle.net/shop/products/input-output-devices/axiomatic-electronic-assistant/ Purchase]'''
|style = "height:180px; width:180px;"|
|style = "height:180px; width:180px;"|
''' [[Other_IO_Devices_Downloads#Electronic_Assistant | Datasheet]]'''
''' [[Other_IO_Devices_Downloads#Electronic_Assistant | Datasheet]]'''
 
|style = "height:180px; width:180px;"|
'''-'''
|}
|}


===Electronic Assistant and Canopen===
===Electronic Assistant and CANopen===
Axiomatic offers CANopen ready modules that do not require the Axiomatic Electronic Assistant software configuration tool.
Axiomatic offers CANopen-ready modules that do not require the Axiomatic Electronic Assistant software configuration tool.


The parameters in Axiomatic CANopen products can be read or written through any standard CANopen  
The parameters in Axiomatic CANopen products can be read or written through any standard CANopen tool that can access an ECU's Object Dictionary. In addition to the User Manual, Axiomatic also provides Electronic Data Sheets (EDS) with all their CANopen ECUs, as per the standard "CiA DSP 306 V1.3, Electronic Data Sheet Specification for CANopen (EDS)".
tool that can access an ECU's Object Dictionary. In addition to the User Manual, Axiomatic also provides  
Electronic Data Sheets (EDS) with all their CANopen ECUs, as per the standard "CiA DSP 306  
V1.3, Electronic Data Sheet Specification for CANopen (EDS).


===Axiomatic User Manuals===
===Axiomatic User Manuals===
To view detailed user manuals for axiomatic products click [http://www.axiomatic.com/user-downloads/ here]
To view detailed user manuals for Axiomatic products, click '''[http://www.axiomatic.com/user-downloads/ here]'''.
Password: trillium
Password: '''trillium'''


=Discontinued Products=
=Discontinued Products=
Line 836: Line 1,009:
|[[IO_Devices#10_Universal_Signal_Input_to_CAN | AX030121]]
|[[IO_Devices#10_Universal_Signal_Input_to_CAN | AX030121]]


|-
|[[File:AXTC4CO.gif|160px]]
|style = "height:150px; width:180px;"|
'''Thermocouple Module <br>4-Channel'''<br> CANopen'''
|style = "height:150px; width:180px;"|
AXTC4CO
|style = "height:150px; width:180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|-
|[[File:AX130500.jpg|150px]]
|style = "height:150px; width:180px;"|
'''Dual Universal Signal Converter'''
|style = "height:150px; width:180px;"|
AX130500
|style = "heigh:150px; width 180px;"|
'''Please contact [mailto:sales@neweagle.net sales]'''
|}
|}

Latest revision as of 17:01, 6 February 2023

Introduction

New Eagle carries or can build or source Input/Output (I/O) devices for your application. Please read below about current offerings or contact sales to discuss your needs.

Datasheet or user manual not available? Check out the Additional Downloads or please visit our Support Portal.

System Input Modules

1 Universal Signal Input to CAN

The 1 Universal Signal Input Module measures one universal signal input (Voltage, Current, Resistive, Digital, Frequency, or PWM) and outputs the value over CAN. This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.

Picture Product Name Part Number Webstore Downloads More Information

1 Universal Signal
Input to CAN

AX030530

Purchase

Datasheet

-

Protocol Converter
2 CAN ports
1 RS485 port

AX140X00

Please contact sales

Datasheet

-

10 Universal Signal Input to CAN

The 10 Universal Signal Input Module measures up to 10 analog inputs (0-5V, 0-20mA or 4-20mA) for connection to a variety of analog machine sensors or levers and sends the data to a CAN network. The user can also select multiple PWM or frequency inputs as well as a counter input. An active high digital input is another user-selectable input.

Picture Product Name Part Number Webstore Downloads More Information

10 Universal Signal Input
CAN Controller

SAE J1939

AX030120

Purchase

Datasheets

-

10 Universal Signal Input
CAN Controller

SAE J1939,
500 kbps

AX030120-01

Please contact sales

10 Universal Signal Input
CAN Controller

SAE J1939,
1 Mbps

AX030120-02

Please contact sales

10 Universal Signal Input
CAN Controller

CANOpen

AX030121

Purchase

18 Digital Signal Input to CAN

The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electronic control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24VDC power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant.

Picture Product Name Part Number Webstore Downloads More Information

18 Digital Signal Input
CAN Controller

SAE 1939,
500 kbps

AX030310-01

Purchase

Datasheets

-

10 Universal Signal Input
CAN Controller

SAE J1939,
1 Mbps

AX030120-02

Please contact sales

10 Universal Signal Input
CAN Controller

CANopen

AX030311

Please contact sales

20-Channel Thermocouple Scanner

The Thermocouple Scanner monitors up to 20 thermocouple channels and the temperature information is provided to the engine control system over J1939 (AX185000) or CANopen (AX185001). The scanner can flag low temperature warnings, high temperature warnings or high temperature shutdowns to the engine control system. It will also detect and indicate open circuits on the sensor wires. Temperature is measured in °C, with a 0.001°C resolution. The scanner is available in CANopen or J1939 CAN communication standards.

Picture Product Name Part Number Webstore Downloads More Information

Thermocouple Scanner
20 Thermocouple Channels
CAN (SAE J1939)

AX185000

Purchase

Datasheets

-

Thermocouple Scanner
20 Thermocouple Channels
CANopen

AX185001

Purchase

RTD Scanner

The RTD Scanner monitors up to eight channels of several types of RTDs. The temperature information is provided to an engine control system over an SAE J1939 or CANopen bus. Temperature information can include exhaust temperature, winding temperature and fluid temperature monitoring. All eight channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity and the RTD inputs are isolated from each other. The RTD temperature monitoring control features rugged packaging and watertight Deutsch IPD connectors. Applications include power generator sets.

Picture Product Name Part Number Webstore Downloads More Information

RTD Scanner
CAN (SAE J1939)

AXRTD8

Please contact sales

Datasheets

-

RTD Scanner
CANopen

AXRTD8CO

Please contact sales

4-Channel Thermocouple to CAN

The Thermocouple Module monitors up to four channels of Type J, K or T thermocouples (others on request).

Picture Product Name Part Number Webstore Downloads More Information

Thermocouple Module
4-Channel

CAN (SAE J1939)

AXTC4

Purchase

Datasheets

-

Magnetic Pick-Up Sensor to CAN Converter (SAE J1939)

Converts a magnetic speed sensor signal into SAE J1939 CAN messages for communication with control systems.
Picture Product Name Part Number Webstore Downloads More Information

Magnetic Pick-Up Sensor to CAN Converter

AX031500

Purchase

Datasheet

-

Isolated Signal Converter with CAN

A two-channel signal converter with isolation and CAN bus, this product is designed for diesel engine control systems, industrial automation, vehicle automation and machine control integration. The signal converter accepts two analog current or voltage signals, resistive or digital inputs, PWM or frequency/RPM inputs and converts them into two analog, PWM, frequency or digital signal outputs. A +5V reference powers sensor inputs. The unit has 4-way isolation between power, inputs, outputs and CAN. The I/O control includes CAN bus automation for SAE J1939 12VDC or 24VDC control systems or CANopen networks. It can be installed in control panels, industrial control automation systems, power generator set control systems, off-highway equipment, construction machines and test equipment.
Picture Product Name Part Number Webstore Downloads More Information

Isolated Signal Converter with CAN
SAE J1939

AX130510

Purchase

Datasheet

-

16 Analog I/O Module

The 16 Universal Signal Input/Analog Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. This controller features one CAN port for user-defined communications over the bus. It accepts up to eight analog (0-5V, 0-10V, 0-20mA or 4-20mA) or digital or PWM frequency inputs and provides eight analog outputs (0-5V, 0-10V, +/-5V, +/-10V, 0-20mA, 4-20mA). Diagnostics messages are provided over the CAN network for the status of inputs or outputs. A RS-232 port is provided for user configuration via PC or for diagnostic purposes.
Picture Product Name Part Number Webstore Downloads More Information

16 Analog I/O Module
SAE J1939

AX030200

Purchase

Datasheets

-

16 Analog I/O Module
CANopen

AX030201

Please contact sales

4-Channel Strain Gauge to CAN Controller

The 4-Channel Strain Gauge CAN controller accepts up to four 4-wire strain gauge connections. The input range is user selectable from +/- 19.5mV to +/- 2.5VDC. It interfaces with the machine’s CAN network (SAE J1939). The measurement rate is 2.5 scans per second and the update rate is 400ms for all four channels. Standard embedded software is provided. Rugged IP67 rated packaging and a power supply input of 12VDC or 24VDC nominal suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant.

Picture Product Name Part Number Webstore Downloads More Information

4-Channel Strain Gauge to CAN Controller
SAE J1939

AX200000

Please contact sales

Datasheet

-

Connector Amplifier for Proportional Valves – DIN 43650A

(0-10V input, 1.2A output, 2m grey cable, IP65)

The connector amplifier supplies a solenoid valve with current proportional to an input control (0-10VDC or 0-20mA). Application: Accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile construction equipment and industrial processes.

Picture Product Name Part Number Webstore Downloads More Information

Connector Amplifier
for Proportional Valves
DIN 43650A

AX-CAPV-H-10V-1.2A-6C-2M

Purchase

Datasheet

-

GPS Receiver - CAN J1939

The GPS Receiver – J1939 is a fast update GPS that outputs J1939 data. Its update time is only 0.1 seconds, and it is extremely accurate at capturing position, velocity and time.

Picture Product Name Part Number Webstore Downloads More Information

GPS Receiver CAN J1939 - 250 Baud

GPS-REC-J1939-001

Purchase

Datasheet

-

GPS Receiver CAN J1939 - 500 Baud

GPS-REC-J1939-002

Purchase

System Output Modules

CM0410 Input Output Module

The CM0410 is a general-purpose input/output controller that includes a single J1939 CAN interface, four inputs, one high-side current measurement pass-through and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus. The CM0410 is a CAN slave module only and supports no standalone operation.

Picture Product Name Part Number Webstore Downloads More Information

CM0410 Input Output Module
J1939

CM0410

Purchase

-

More Details

CAN Analog Signal Output Controllers

Picture Product Name Part Number Webstore Downloads More Information

CAN Analog Signal Output Controller
J1939

AX030520

Purchase

Datasheets

-

CAN Analog Signal Output Controller
CANopen

AX030521

Purchase

11:9 CAN Controllers

Picture Product Name Part Number Webstore Downloads More Information

11:9 Controller
SAE J1939

AX031200

Purchase

Datasheets

-

11:9 Controller
CANopen

AX031201

Purchase

CAN to 10 Output Valve Controller

Available in 12V, 24V and 48V operating input power modules, this durable CAN-controlled output controller is capable of providing 10 universal outputs at up to 2.5A or 7A for the whole module. Applications include proportional valves, hotshot control profiles, PWM signals and on/off valves. Settings may be user configured via Windows-based Electronic Assistant.

Picture Product Name Part Number Webstore Downloads More Information

CAN to 10 Output
Valve Controller

CAN (SAE J1939)

AX021210

Please contact sales

Datasheets

-

CAN to 10 Output
Valve Controller

CAN (SAE J1939),
500 kbps

AX021210-01

Purchase

CAN to 10 Output
Valve Controller

CANopen

AX021211

Purchase

CAN (J1939) to 4-Channel Analog Output

The IO device belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.

Picture Product Name Part Number Webstore Downloads More Information

CAN to 4-Channel
Analog Output Device

250 kbps
(SAE J1939)

AX030500

Purchase

Datasheets

-

CAN to 4 Channel
Analog Output Device

500 kbps

AX030502

Please contact sales

CANopen to 4-Channel Analog Outputs

The 4-Channel Analog Signal Outputs CAN IO device belongs to a family of Axiomatic user-customizable smart controllers. The programmable internal architecture provides users with an ultimate flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using any commercially available CANopen tools.

Picture Product Name Part Number Webstore Downloads More Information

CANopen to 4-Channel Analog Signal Outputs Device

AX030501

Purchase

Datasheet

-

TC/Analog Input of CAN Controller

The TC/Analog Inputs to CAN Controller receives inputs from engine coolant, fuel and differential pressure sensors, engine temperature sensors, thermistors as well as thermocouples and is networked to an SAE J1939 based control system. Seven +5V references (10mA) are provided to power the sensors. The two CAN ports are isolated from signal inputs and thermocouple inputs.

Picture Product Name Part Number Webstore Downloads More Information

TC/Analog Input of CAN Controller

AX181000

Purchase

Datasheet

-
Connector Kit

AX070123

Please contact sales

-

-

CAN Enabled Current Driver

The Single 5-amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU. This is a customizable solution that allows for custom logic or the use as a simple CAN-based slave. Configuration and service tools are available.

Picture Product Name Part Number Webstore Downloads More Information

CAN Enabled
Current Driver

(Custom)
Please contact sales

Built upon the
ECM-S12-24
or the
ECM-563-48

-

-

Multiplexed Power Distribution Module (MPDM)

The New Eagle Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CANopen messages.

Picture Product Name Part Number Webstore Downloads More Information

Multiplexed Power
Distribution Module

MPDM-NE1

Purchase

Datasheets

More Details

MPDM-31M-300-0

Purchase

DC-DC Converter

The DC/DC converter is suitable for application on charging/cranking battery-based systems. Power from a vehicle battery is conditioned at the same voltage level and isolation is provided to protect onboard electronic devices.

Picture Product Name Part Number Webstore Downloads More Information

Axiomatic Isolated 24VDC/24VDC Converter

AX081530

Purchase

Datasheets

-

AX081530K
(with 2mm cable)

Purchase

High Current H-Bridge Module

The H-Bridge module is a solid state, DC load reversing switch that is wired in an H-Bridge configuration. Rated for up to 30A at 24VDC, this device provides an efficient way to reverse polarity on a variety of DC loads, including solenoids, motors and brake/clutch assemblies. A J1939 CAN-controlled variant of the H-Bridge module is available for purchase. The CAN communications allow for greater control of the device, including current feedback and limiting. The module uses wired signals to adjust the J1939 source address for multiple identical devices on a given bus. A predefined DBC file for the CAN-controlled variant is also available for purchase.

Picture Product Name Part Number Webstore Downloads More Information

Rugged 30A H-Bridge
250 kbps

HB-30A

Purchase

Datasheets

-

Rugged 30A H-Bridge
SAE J1939,
250 kbps

HB-30A-J1939

Purchase

Rugged 30A H-Bridge
SAE J1939,
DBC File

HB-30A-J1939-DBC

Purchase

Connector Kit for
Rugged 30A H-Bridge

CONKIT-HB-30A

Purchase

CAN Enabled Current Driver

The Single 5-amp bi-directional current driver is built from either a MotoHawk ECM S12-24 or ECM 563-48 ECU. This is a customizable solution that allows for custom logic or the use as a simple CAN-based slave. Configuration and service tools are available.

Picture Product Name Part Number Webstore Downloads More Information

Remote Mount Solenoid Driver – DIN Rail Mount

AX-RSD-DR-4-20MA-2A

Purchase

Datasheet

-

Protocol Converters

2 SAE J1939, SAE J1587

Picture Product Name Part Number Webstore Downloads More Information

Protocol Converter,
2 SAE J1939, SAE J1587

AX140400

Purchase

Datasheet

-

LIN to CAN Protocol Converter

The LIN-CAN Protocol Converter, SAE J1939 exchanges data between a LIN network and a CAN network. This device is J1939 compliant and can be configured with the Axiomatic Electronic Assistant PC tool.
Picture Product Name Part Number Webstore Downloads More Information

LIN-CAN Protocol Converter, SAE J1939, Extended,
Auto-baud-rate-detect

AX140600-03

Purchase

Datasheet

-

LIN-CAN Protocol Converter, SAE J1939, 500kbps Baud Rate

AX140600-01

Purchase

Datasheet

-

Digital Keypads

4-Position Keypad

Hassle-free control and customization is literally at your fingertips. The Power Key is reconfigurable, readdressable and relegendable, requiring only a laptop or PC connection. Its secure-locking inserts (not included in purchase) can be interchanged to match the configuration.

Picture Product Name Part Number Webstore Downloads More Information

Powerkey Pro 4 Position CAN, Deutch Conn.

KEYPAD-DS-004-02

Please contact sales

-

-

8-Position Keypad

This standard keypad allows a designer to build a semi-custom system for a minimal cost. Each keypad is made from extremely high-quality and rugged silicone that can be laser etched with specified button legends, text or company logos. Communication protocols include RS485, J1030/J1939-11, CANopen and others.

Picture Product Name Part Number Webstore Downloads More Information

8-Position CAN Keypad

KEYPAD-DS-008-02

Purchase

Datasheet

-

Note: CAN DBC file available upon request.


Specialty IO Modules

J1772 Vehicle Power Interface Module (VPIM)

The J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with Electric or plug-in Hybrid Electric vehicle charging equipment in accordance with the SAE J1772 specifications. It allows the vehicle systems and ECUs that require a low current "sleep" mode to be managed externally and monitors the inputs, providing an output that will drive an external "Wake Up" relay which, in turn, provides power to the connected systems.

Picture Part Number Webstore Downloads More Information

VPIM-024-1301

Purchase

Downloads

More Details

PWM to Analog Converter (Pedal Emulator)

The New Eagle PWM to Analog Converter converts three separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.

Picture Part Number Webstore Downloads More Information

PWM-AN-024-1403

Purchase

Downloads

More Details

DBW PWM to Analog Pedal Emulator

The New Eagle DBW PWM to Analog Converter is optimized to operate in Drive-By-Wire (DBW) applications. It is designed to take the Raw Analog and Digital signals from the accelerator and brake pedals respectively and either pass the signal through to the OEM ECU or override the signals with commanded PWM signals from the DBW Aftermarket ECU.

Picture Part Number Webstore Downloads More Information

PWM-DBW-024-2001

Please contact sales

Datasheet

More Details

PWM-DBW-024-2002

Datasheet

LVDT Simulator for LVDT or RVDT Sensors

The LVDT Simulator is used to test LVDT or RVDT sensors. Using a 0-10VDC command signal input and an excitation (drive input), the unit provides two simulation outputs of 1-5VAC. An internal 3kHz oscillator can be utilized as an alternative excitation source. Both outputs are fully isolated. The unit accepts power supply input from 4-32VDC. When the input voltage increases from 0 to 10VDC, the output voltage A increases from 1 to 5VAC and the output voltage B decreases from 5 to 1VAC. Factory settings for the offset (minimum) and span (maximum) are user adjustable. A LED indicates power is ON. The unit is conformal coated and available in a DIN rail mount housing.

Picture Part Number Webstore Downloads More Information

AX-LVDTS-DR-03

Purchase

Datasheet

-

Electronic Assistant

The Electronic Assistant® is a software configuration tool that runs on the Windows operating system and is connected to a J1939 bus via a USB to CAN converter, AX070501. Upon being connected to the bus, the EA will find all IO devices on the bus and recognize those manufactured by Axiomatic. Using this tool, a user can quickly configure an Axiomatic IO device for the desired performance over a wide variety of applications.

Picture Part Number Webstore Downloads More Information

AX070502

Purchase

Datasheet

-

Electronic Assistant and CANopen

Axiomatic offers CANopen-ready modules that do not require the Axiomatic Electronic Assistant software configuration tool.

The parameters in Axiomatic CANopen products can be read or written through any standard CANopen tool that can access an ECU's Object Dictionary. In addition to the User Manual, Axiomatic also provides Electronic Data Sheets (EDS) with all their CANopen ECUs, as per the standard "CiA DSP 306 V1.3, Electronic Data Sheet Specification for CANopen (EDS)".

Axiomatic User Manuals

To view detailed user manuals for Axiomatic products, click here. Password: trillium

Discontinued Products

Picture Product Name Part Number Replacement
10 ANALOG INPUT MODULE, SAE J1939 AX030100 AX030120
10 ANALOG INPUT MODULE, CANOPEN AX030101 AX030121

Thermocouple Module
4-Channel

CANopen

AXTC4CO

Please contact sales

Dual Universal Signal Converter

AX130500

Please contact sales