Controllers: Difference between revisions
| Line 613: | Line 613: | ||
|} | |} | ||
===HCM-ARM4-70-1401 (CM3620)=== | ====HCM-ARM4-70-1401 (CM3620)==== | ||
{|class="wikitable" cellpadding = "5" | {|class="wikitable" cellpadding = "5" | ||
Revision as of 18:21, 22 April 2014
Introduction to New Eagle Controllers
We have the following types of controllers:
- Body Control Modules (BCMs)
- Engine Control Modules (ECMs)
- General Control Modules (GCMs)
- Hydraulic Control Modules (HCMs)
- Telematics Control Modules (TCM)
The controllers range in pin count, input, output, memory, and processor configuration.
Most modules are available in ‘F’ (Flash) or ‘C’ (Calibratible) versions. Flash modules are typically used for production purposes. Calibratible modules are typically for prototyping/development purposes and can be calibrated in real time using MotoTune or another calibration tool.
ECU Quick Reference Guide
Compare your IO, processing, and memory requirements to our online ECU Summary table.
ECU Selection Guide
To help select a electronic controller unit for a project, the ECU Selection Sheet is a valuable starting point. It helps the user ask all the basic questions needed to select a module for a project. If New Eagle is doing a project for you, this would be the document we would use for selecting the module and explaining the overall system. You can use this to help explain what exactly you need for your electronic control system.
- Online Form - If you wish to fill out our form online, use online ECU selection
- Download Form - Please download, complete, and email or fax it when you're done. ECU Selection Document
Currently Available
Engine Control Modules (ECM)
ECM-555-48 (ECM48)
Features Include
- Freescale MPC555 40MHz microprocessor
- Operating voltage: 8-16 VDC
- operating Temperature: -40°C to 85°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information |
|---|---|---|---|---|---|
|
ECM-555-48-0710 |
|
ECM-555-80 (PCM80)
Features Include
- Freescale MPC555 40MHz microprocessor
- Operating voltage: 8-16VDC
- Operating Temperature: -40°C to 105°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information |
|---|---|---|---|---|---|
|
ECM-0555-080-0310 ECM-0555-080-0702 ECM-0555-080-0703 ECM-0555-080-0802 ECM-0555-080-0803 |
|
Discontinued |
ECM-0555-080-0701 datasheet |
ECM-563-48 (ECM48)
Features Include
- Freescale MPC 563 56MHz microprocessor
- Operating Voltage:: 8-16 VDC
- Operating Temperature: -40°C to 106°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
ECM-563-48-0705 ECM-563-48-0704 ECM-563-48-0701 |
|
ECM-563-48-0701-CP1-M |
ECM-563-48-0701 datasheet | ECM-563-48 |
ECM-565-128 (PCM128)
Features Include
- Freescale 565 MPC 56 MHz mcroprocessor
- Operating Voltage:9-32 VDC
- Operating Temperature: -40°C to 105°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
ECM-0565-128-0701-F ECM-0565-128-0702-C |
|
ECM-0565-128-H701-F-M | ECM-0565-128-0701-F datasheet | ECM-0565-128 |
ECM-5554-112 (PCM112)
Features Include
- MPC 5554 80 MHz
- Operating voltage: 9-16 VDC
- Operating Temperature: -40°C to 105°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
ECM-5554-112-0902 ECM-5554-112-0904 |
|
ECM-5554-112-0902-F-M | ECM-5554-112-0902 datasheet | ECM-5554-112 |
ECM-S12X-70 (ECM70)
Features Include
- Freescale MC9S12XEP100 50 MHz microprocessor
- Operating voltage: 6.5-16 VDC(jump start), 5 V(crank)
- Operating temp: -40°C to 85°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Informatiom
|
|---|---|---|---|---|---|
|
ECM-S12X-70-1001 |
|
ECM-0S12-070-1001-CPO-M | ECM-S12X-70-1001 datasheet | ECM-S12X-070 |
ECM-S12-24 (SECM)
Features Include
- Freescale S9S12
- Operating Voltage: 8-16 VDC
- Operating Temperature: -40°C to 105°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
ECM-S12-24-801 ECM-S12-24-802 ECM-S12-24-804 |
|
ECM-0S12-024-0801-C-M | ECM-S12X-24-802 datasheet | ECM-S12-24 |
ECM-5642-112-1101 (ECM-OH)
112 Pin 5644 Engine Control Module
Features include
- MPC5644 120 MHz Main Microprocessor
- S12G128 24 MHz Auxiliary Microprocessor
- Operating Voltage: 8-32 VDC
- Operating Temperature: -40°C to 105°C
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
ECM-564x-112 (ECM-OH) |
|
ECM-5642-112-1304-F-M | ECM-5644-112 Datasheet |
Coming Soon |
ECM-564x-112 |
General Control Modules (GCM)
GCM-563-48 (GCM48)
Features include:
- Freescale MPC563 56 MHz Microprocessor
- Operating Voltage: 8-32 VDC
- Operating temperature reanging from -40°C to 85 °C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
GCM-0563-048-0801 GCM-0563-048-0802 |
|
GCM-0563-048-0801-C-M | GCM-0563-048 Family Datasheet | GCM-563-48 |
GCM-565-24 (GCM24)
New Eagle offers a 24 pin General control module, used primarily for communication Features Include
- MPC565 56 MHz microprocessor
- operating Voltage: 6-32 VDC
- Operating Temperature: -40°C to 65°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
GCM-0565-024-0602 |
|
GCM-0565-024-0602 | GCM-565-24-0602 Datasheet | n/a, same mechanical housing as the GCM-S12-24 | n/a |
GCM-S12-24 (MCHI)
Features include:
- Freescale MC9S12DT128, 24 MHz Microprocessor
- Operating Voltage: 8-16 VDC
- Operating temperatures ranging from -40°C to 105°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | Drawing | More Information |
|---|---|---|---|---|---|
|
GCM-0S12-024-0401 GCM-0S12-024-0402 GCM-0S12-024-0403 |
|
GCM-0S12-024-0401-F-M | GCM-0S12-024-0401 | GCM-S12-24 |
GCM-5554-112 (GCM112)
Features Include
- Motorola MPC5554, 80MHz Microprocessor
- Operating Voltage: 9-16 VDC, 24V (Jump start), 4.5V (Crank)
- Operating temperatures ranging from -40°C to 105°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
GCM-5554-112 |
|
GCM-5554-112-1001-F-M | GCM-5554-112-1001 Pin Out | GCM-5554-112 |
GCM-S12-64 (DCSM)
Features include:
- Freescale MC9S12XD256CAG Microprocessor
- Operating Voltage: 9-20 VDC
- Operating temperatures ranging from -40°C to 85°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
GCM-S12X-64-DCSM |
|
GCM-S12X-64-DCSM | GCM-S12X-64-DCSM |
coming soon |
GCM-S12-64 |
Hydraulic Control Modules (HCM)
HCM-563-48 (HCM48)
- MPC 563 at 40 MHz microprocessor
- Operating Voltage: 8-32 VDC
- Operating Temperature: -40°C to 85°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | Drawing | More Information
|
|---|---|---|---|---|---|
|
HCM-0563-048-0801 HCM-0563-048-0802 HCM-0563-048-0803 |
|
HCM-0563-048-0801-C-M
HCM-0563-048-0802-F-M: HCM-0563-048-0803-F-M: |
HCM-0563-048-0801 | HCM-563-48
|
HCM-5604-36-1303 (CM0711)
Features Include
- Freescale 32 bit 64 MHz
- Operating Voltage: 5.5-36 VDC
- Operating Temperature: -40°C to 85°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
HCM-5604-36-1303 (CM0711) |
|
Please contact sales |
HCM-ARM4-70-1401 (CM3620)
| Part Number | Picture | Visit our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
HCM-ARM4-70-1401 (CM3620) |
|
Please contact sales |
HCM-5534-90-1201/1302 (CM3626)
Features Include
- Duel Freescale MPC5534 16 MHz
- Operating Voltage: 6-32 VDC
- Operating Temperature: -40°C to 85°C
Modules Available
| Part Number | Picture | Visit Our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
HCM-5534-90-1201 (CM3626) HCM-5534-90-1302 (CM3626) |
|
Please contact sales |
In Development - Pending Availability
The New Eagle family of controllers is growing and expanding. The following controllers will be added soon. Please contact New Eagle Sales for more information.
HCM-5534-50-1203 (CM2115)
The New Eagle CM2115, built by Parker, is a High Side Driver Hydraulic Controller is a unique controller built for off-road and on-road applications. It has many high side drivers and I/O for mobile hydraulic and other machine control.
Features include
- Freescale MPC5534 16MHz
- Operating Voltage: 6-36 VDC
- Operating Temperature: -40°C to 85°C
| Part Number | Picture | Visit Our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
HCM-5534-50-1203 (CM2115) |
|
Please contact sales |
ECM-5634-70-1301 (SECM70)
The SECM70, previously called the ECM-MI (Mobile Industrial), is one of the MotoHawk engine management offerings for Mobile Industrial (forklift) or stationary (genset) applications. This could include 4 & 6 cylinder 4-stroke LPG/gasoline forklift applications, and 4 & 6 cylinder 4-stroke genset applications. The module is capable of full authority digital engine control (FADEC) consisting of fuel, spark, and air delivery to the engine. Additional inputs and outputs are available to control other system functions, as defined by software.
| Part Number | Picture | Visit our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
ECM-5634-70-1301 (SECM70) |
|
Please contact sales |
HCM-ARM4-70-1401 (CM3620)
| Part Number | Picture | Visit our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
HCM-ARM4-70-1401 (CM3620) |
|
Please contact sales |
BCM-5646-48-1401 (BCM48)
The BCM48 functions as a communications gateway controller or general purpose automotive grade rugged controller. It uniquely has four CAN, 4 LIN, and embedded Ethernet as well as discrete IO. With an IP67 rating, the BCM48 is able to withstand rough automotive, marine, and off-road environments. This device will be Simulink programmable.
| Part Number | Picture | Visit our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
BCM-5646-48-1401 (BCM48) |
|
Please contact sales |
Please contact sales |
Potentially Available
These ECUs have been identified as interesting additions to New Eagle's ECU line-up, but we do not have a current R&D or sponsoring customer. If interested in these controllers, please contact New Eagle Sales. Furthermore, if you have a controller or know of a controller for which you need our model-based design tools and support, please let us know.
BCM-S12-36 Gateway Module
This controller is a production CAN gateway with analog and discrete I/O. It contains a S12 16 bit microprocessor. This multiple-input module can serve as a CAN Gateway Between 2 or More Protocols. Supported protocol includes J1939, GMLAN, J1850, RVC, and others.
21 inputs: 4 High side, 4 Analog, and 7 Configurable Digital (High/Low). Field flashable and IP 67 Rated.
This product is not currently available. It is in production at manufacturer, and available with a supply agreement
| Part Number | Picture | Visit our Webstore | Datasheet | More Information |
|---|---|---|---|---|
|
BCM-S12-36 |
|
Please contact sales |
Please contact sales |
Naming, General Controller FAQs, Webstore, Warranty info
New Eagle Control Module Naming Scheme
The New Eagle naming scheme is broken into four main parts: type of control module, type of microprocessor, number of pins, and model year & variant. An extra sequence of numbers/letters may be seen at the end which determine certain model features such as flash, calibratible, or mounting feet.
ECM-565-128-0701-C-M
- Start by looking at the first section which determines the type of control model. The model in the above example is an ECM (Engine Control Module) as opposed to a GCM (General Control Module), HCM (Hydraulic Control Module), or BCM (Body Control Module)
- The second part describes the type of microprocessor the module has. The above module has a MPC565 Microprocessor.
- The third part shows the number of pins that the module has. The example module has 128 pins.
- The fourth section consists of the model year and the model variant. In the above example, the control model has a model year of 2007 and is the first variant.
- The next section that may appear when naming modules determines certain features that the model may have. 'C' stands for Calibratible - thus the above module is calibratible. Other Endings may include 'F' (Flash), 'M' (Mounting Feet), 'CPO' (Calibratible "DEV" Development Module), and 'F00' (Flash "PROD" Production Module).
- The last letter is M or it is blank. M means mounting feet are included.
Module Naming Quick Cheat Sheet:
Module: ECM-555-80-xxyy-CP0-M or F-M
ECM = engine control module
555 = MPC 555 microprocessor
80= 80 pins
xx = model year (e.g. 07 = 2007 model year)
yy = variant of 80-pin model for xx model year (e.g. 03 = third variant).
-Czz = calibratable "DEV" development module (zz is the development level (i.e. P1 - prototype level 1)
-F = flash "PROD" production module
The final letter is -M meaning rubber mounting feet attached. If the part number does not end in a M, the module will not come with feet.
General Controller FAQ
Controller FAQs. This section describes information common across modules. For specific module information, go to the controller page for that module family.
Webstore
Usage Warranty Policy
Please note that information given on the capability of a singular input or output is provided based on knowledge of its intended/designed/specified mode of operation.
New Eagle does not know how a customer may apply the module, and thus does not provide warranty without an express and specific production supply agreement based on the cumulative operating mode (which requires manufacturer testing/approval to validate).
Most products sold as engineering prototypes do not have warranty. The details are covered in the terms and conditions of sale.
New Eagle Engineering is available to assist with the validation of your application to the module design, hence providing the ability to gain a warranty for your recurring, production use.