EV-Components

New Eagle > Products Wiki > EV Components

New Eagle has an extensive supplier network to provide the best validated components at competitive prices. This offering includes a full set of components required for the design and manufacture of electric and hybrid vehicles.

Electric & Hybrid Vehicle Controls Software

Turn-Key EV Supervisor Controller (EVC)
The EVC is a controller module containing EV Software that is designed to work out of the box with an extensive list of EV components.

It does not include other hardware.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-ECM-0904-EVS-C-M (Dev)	Buy Now	Datasheet User Manual	More Details
	ASM-ECM-0904-EVS-F-M (Prod)	Buy Now

EV Start-Up Kit
The New Eagle EV Supervisor Start-Up Kit is a set of hardware parts and software that is designed for rapid electric vehicle development. The intent is for the
electric vehicle developer to be able to integrate EV system components easily and quickly.

Picture	Part Number	Webstore	Downloads	More Information
	NE-EVSKIT-001	EV Start-Up Kit	Brochure	More Details

EV Software Template
The software template library is built with MotoHawk software to give robust and proven EV supervisory source code. This complete and working software is
designed to interface with an extensive list of EV components and serves as a solid foundation for future development.

This package does not include any hardware.

Picture	Part Number	Webstore	Downloads	More Information
	NE_EV_ Supervisor_001	Buy Now	Brochure	More Details

Electric Motors

Remy Motors

REM-HVH250 Series

Remy’s HVH250 Series is a scalable motor with options for stack length, cooling and conductor configurations. They are available in housings, cartridges or as stator/rotor assemblies.

Picture	Part Number	Winding Type	Webstore	More Information
	BW-HVH250-115-DOC	Dual	PURCHASE	More Details White Paper Accessories
	BW-HVH250-90-DOC	Dual	PURCHASE
	BW-HVH250-90-DOM	Dual	PURCHASE
	BW-HVH250-90-SOM	Serial	PURCHASE
	BW-HVH250-115-DOM	Dual	PURCHASE
	BW-HVH250-115-SOM	Serial	PURCHASE
	BW-HVH250-115-SOC	Serial	Please Contact Sales
	BW-HVH250-90-SOC	Dual	Please Contact Sales

*Datasheets are not available for all of the possible Remy motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.

REM-HVH410 Series

The new HVH410 is a powerful, rugged electric motor designed to drive heavy-duty and off-road vehicles, in addition to special equipment and power generation applications.
The HVH410 is compact, and has options for different stack lengths, cooling and conductor configurations. They are available in housings or as stator/rotor assemblies.

Picture	Part Number	Webstore	Downloads	More Information
	REM-HVH-410	Please contact sales	HVH-410-075-DOM Datasheet* HVH-410-150-DOM Datasheet*	More Details

*Datasheets are not available for all of the possible Remy motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.

UQM Motors

UQM motors are sold as a package that includes a motor and inverter.

PowerPhase HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94 percent efficiency,
these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive,
lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 950 HD HiTor UQM-HD-950T	-	Datasheet	More Details

PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95 percent efficiencies, these systems
consist of a high performance, liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase Pro 100 UQM-PP-100	-	Datasheet	More Details
	PowerPhase Pro 135 UQM-PP-135	-

PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95 percent efficiencies, these systems consist of a
high performance liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for medium to heavy duty truck, bus, marine, locomotive, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 220 HD UQM-HD-220	-	Datasheets	More Details
	PowerPhase Pro 250 UQM-HD-250	-

*Datasheet is available with non-disclosure agreement and direct contact with sales.

Parker Motors

Designed for the demanding applications found in today’s high-performance electric and hybrid vehicles, Parker’s GVM (Global Vehicle Motor) Series of traction
motors offer lower weight and higher power in a smaller package than other traction motors on the market.

GVM 142
The GVM 142 is Parker's newest motor designed for electric and hybrid vehicle applications. It includes a 142 mm frame size with an SAE A adapter mount.
It attains 95% efficiency, and is compliant with SAE J1455 environmental standards.

Picture	Part Number	Webstore	Downloads	More Information
	GVM 142	Please contact sales	Datasheet	More Details

GVM 210
The GVM210 Traction Motor is designed to meet the power requirements of a wide variety of vehicle applications. The GVM has the ability to operate at different
bus voltages, without loss of power. It achieves 95% efficiency.

Picture	Part Number	Webstore	Downloads	More Information
	GVM 210	Please contact sales	Datasheet	More Details

Electric Traction Inverters

New Eagle supplies a variety of inverters. If needed, New Eagle can help you choose the best inverter solution for your project. Please contact us for more information.

John Deere Electronics

PHO-PD300-PROD
The PD300 traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD300 produces 200 KVA output power and weighs a mere 17 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD300-PROD	Buy Now	Datasheet	More Details

PHO-PD550-PROD Single
The PD550 Single traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD550 Single produces 300 KVA output power and weighs 35 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD550-PROD Single	Buy Now	Datasheet	More Details

PHO-PD550-PROD Dual
The PD550 Dual traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD550 Dual produces 300 KVA (x2 outputs) output power and
weighs 64 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD550-PROD Dual	Buy Now	Datasheet	More Details

Sevcon

SEV-GEN4-S8-001
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact,
rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drive train system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S8-001	Buy Now	Datasheet	More Details

SEV-GEN4-S10-001
The gen4, size 10 AC motor controller is designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV).
Its high voltage range, up to 800VDC, is well matched to the needs of the automotive, agricultural and commercial transport markets. The same hardware platform
handles both AC Induction and Permanent Magnet AC motor technologies.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S10-001	Please contact sales	Datasheet	More Details

SEV-HVLP-20
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of high voltage, low power inverters designed
for both on-road and off-road applications. The HVLP AC Motor Controllers work with Permanent Magnet and Induction motors. A compact, rugged and cost-effective
design, Sevcon’s HVLP Inverter is well-suited for OEMs, hybrid/electric bus & truck conversions, agricultural OEMs and EV system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-HVLP-20	Please contact sales	Datasheet	More Details

UQM

UQM motors are sold as a package that includes a motor and inverter.

PowerPhase 55 HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94 percent efficiency,
these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive,
lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 950 HD HiTor UQM-HD-950T	-	Datasheet	More Details

PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95 percent efficiencies, these systems
consist of a high performance, liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase Pro 100 UQM-PP-100	-	Datasheet	More Details
	PowerPhase Pro 135 UQM-PP-135	-

PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95 percent efficiencies, these systems consist of a
high performance liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for medium to heavy duty truck, bus, marine, locomotive, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 220 HD UQM-HD-220	-	Datasheets	More Details
	PowerPhase Pro 250 UQM-HD-250	-

*Datasheet is available with non-disclosure agreement and direct contact with sales.

Rinehart Motion

The RMS AC Traction Controllers are designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The PM-Series family is typically the
lightest and smallest inverter for its power due to its high heat flux thermal design approach.

Picture	Part Number	Webstore	Downloads	More Information
	RMS-PM-100DX	Buy Now	Datasheet	More Details
	RMS-PM-100DZ	Buy Now	Datasheet
	RMS-PM-150DX	Buy Now	Datasheet
	RMS-PM-150DZ	Buy Now	Datasheet

DC-DC Converters

Bel 4kW DC-DC Converter
The Bel Power Solutions DNC Series of 4 kW DC/DC Converters creates DC voltages in hybrid and electric vehicles suitable to power low voltage accessories.
The liquid cooled or convection cooled DC/DC converter operates at wide range of input voltages and delivers power range up to 4000 W / 3300 W (liquid / natural
cooled version). Features include very high efficiency (up to 93%), high reliability, low output voltage noise, and excellent dynamic response to load/input changes.

Picture	Part Number	Webstore	Downloads	More Information
	BEL-350DNC40-12G	Buy Now	Datasheet	More Details
	BEL-350DNC40-24G	Buy Now	Datasheet
	BEL-700DNC40-12G	Buy Now	Datasheet
	BEL-700DNC40-24G	Buy Now	Datasheet

UQM 24V DC-DC Converters
These DC-DC converters provide an efficient option for EV, HEV and Fuel Cell Vehicle applications. Both converters are WEG cooled and offer a maximum
60 A (model 60L) or 80 A (model 80L) output current at up to 90% efficiency.

Picture	Part Number	Webstore	Downloads	More Information
	UQM-DC24-60L	Buy Now	Datasheet	More Details
	UQM-DC24-80L	Buy Now	Datasheet

Battery Management System

New Eagle is pleased to offer a complete BMS solution with robust hardware and software designed to fulfill all of the necessary BMS functions. The offering ranges
from 12 to 108 cells, and is expandable up to 180 cells in series for a wide variety of cell chemistry and pack configurations and includes pre-wired harnesses.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-BMS-108-001	Please contact sales	Datasheet	More Details

Displays

New Eagle delivers programmable and turn-key display applications such as the VeeCAN 320 or the VeeCAN 800, which can act as both a display and an EV supervisory controller.

Programmed EV Display
This pre-programmed VeeCAN320L display solution is easy to integrate into your EV system. It is already configured to display fundamental EV parameters,
such as battery SOC, motor speed, drive mode, and faults.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-DISP-MH-EV-01	Buy Now	User Manual splash_update.zip	More Details

Input Output Devices

The following components are necessary to fulfill a number of additional functions required on a vehicle.

Power Distribution

The New Eagle™ Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured
as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses,
relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages.

Picture	Product Name	Part Number	Webstore	Downloads	More Information
	Multiplexed Power Distribution Module	MPDM-NE1	Purchase	Datasheets	More Details
		MPDM-31M-300-0	Purchase

Manual Service Disconnect

The Manual Service Disconnect (MSD) offers a solution to safely remove an internal HV battery pack without short circuiting using a two stage lever to open the
HVIL circuit prior to separation of HV contacts.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-MSD-250-01	Please contact sales	Instruction Sheet Receptacle Drawing Plug Drawing	N/A

Contactor Control Unit

The New Eagle™ Contactor Control Unit provides a solution to electric and hybrid electric vehicle high voltage distribution. It is environmentally sealed and designed
for multiple output configurations. The Contactor Control Unit is designed to work with the low side drivers of any New Eagle™ controller to provide easy integration
and control.

Picture	Part Number	Webstore	Downloads	More Information
File:CCU.jpg	ASM-CCU-NE1-01	Please contact sales	Datasheet	More Details

Pedal Interfaces

New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power
from 2 independent power supplies and output voltages between 0 & 5 V and 0 & 2.5 V. We also sell a connector kit for developing a harness that fits your needs.
We have both firewall and floor mounted models.

Floor Mount Foot Pedal

Picture	Part Number	Webstore	Downloads	More Information
	EFP-136-01	Please contact sales	-	Schematics

Firewall Mount Foot Pedal

Picture	Part Number	Webstore	Downloads	More Information
	EFP-139-00	Please contact sales	-	Schematics

In the event that you want to interrupt the accelerator pedal or need to create a pedal signal output, you can try our PWM to Analog Converter.

J1772 Vehicle Power Interface Module

The New Eagle™ J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with Electric or Plug-In Hybrid Electric (EV/PHEV)
vehicles charging equipment in accordance with the SAE J1772 specification.

Picture	Part Number	Webstore	Downloads	More Information
	VPIM-024-1301	Purchase	Downloads	More Details

Heating and Cooling

HVAC

New Eagle offers a high voltage air conditioning unit for EV and HEV applications.

Picture	Part Number	Webstore	Downloads	More Information
	EV36BNKx	Purchase	Please contact sales*	Specifications

Heaters

New Eagle offers a PTC heating unit for EV and HEV applications.

Picture	Part Number	Webstore	Downloads	More Information
	MI-G2PTC-HEAT Limited Availability	Please contact sales	Please contact sales*	Specifications

Discontinued Products

Delphi 12V, 2.2kW DC-DC Converter
Delphi's 2.2kW DC-DC Converter creates DC voltages in hybrid and electric vehicles necessary to power accessories and the HVAC system. Liquid-cooled,
the DC-DC converter operates at input voltages from 216 to 422 VDC with a power range to 2.2kW. New Eagle has built a MotoHawk Library to communicate
to and from the DC-DC converter.

Picture	Part Number	Webstore	Downloads	More Information
	Universal 2.2kW DC-DC Converter - Obsolete	Please contact sales	Data Sheet Connector Drawing 3-D CAD (.stp) Drawing	More Details