New Eagle offers a wide variety of displays that can meet the needs of practically any automotive, hydraulic, marine, or engine application. Whether your application demands a touchscreen display with custom graphics and data logging capability or you simply need to monitor generic engine parameters, New Eagle can provide a cost-effective display solution for your project. If your project does require a custom display, New Eagle can quickly develop custom software in-house or alternatively equip you with everything you need to begin developing custom display software yourself.
Note: RS-232 for the VeeCAN 800 is coming soon
Raptor Displays
New Eagle’s line of Raptor-compatible displays and complimentary Raptor-Dev software offer an alternative approach to the traditional programming languages: These displays allow developers to leverage the graphical programming environment of MATLAB Simulink to quickly and easily create, edit, and debug display software.
Raptor VeeCAN 800
The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.
Raptor VeeCAN 320
The VeeCAN 320 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN connections and one USB 2.0. Perfect for use with data logging, diagnostics and a control module.
Raptor VeeCAN 320 Lite
The VeeCAN 320 Lite display houses a 3.5" color display with CAN and USB compatibility. Perfect for use as a data logger or a sensor module.
Raptor VeeCAN 320 J1708
The VeeCAN 320 J1708 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN connections and one USB 2.0. Perfect for use with data logging, diagnostics and a control module. This version is J1708 compatible.
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
DISP-VC320-J1708-1204
|
Purchase
|
See VeeCAN J1708 below for datasheet
|
-
|
Raptor VeeCAN 128
The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with four warning LEDs, four tactile buttons, a 6-pin connector, CAN 2.0B and one USB 2.0.
Standard Displays
Pre-programmed Generic Engine Monitoring Displays
All of our standard displays (i.e. non-raptor) are available with pre-installed Generic Engine Monitoring (GEM) software. The GEM software allows the user to connect the display directly to a J1939 CANbus and monitor many different engine and vehicle parameters. A series of easy to use menu screens allow these displays to be configured to suit the individual application. Typical options include language and unit selection and various screen layouts to show parameter icons, bar-graphs and alphanumeric text. If you are using a Generic Engine Monitoring display in your application, purchase of an SDK is not necessary.
C Programmable Displays
Custom display software can also be developed in the C programming language for any of our displays.
In order to write custom display software in C, a Software Development Kit (SDK) must be purchased in addition to the display itself.
VeeCAN 800
The VeeCAN 800 is 7" a fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display, and 2 USB port (1 rear and 1 front accessible). The VeeCAN 800 also supports 14 analog inputs, 4 digital inputs, 8 outputs, 2 CAN connections, as well as an Ethernet connection.
VeeCAN 320
The VeeCAN 320 display houses a 3.5" color display with 7 analog inputs, 3 digital inputs, 4 outputs, 2 CAN channels and 1 USB 2.0. Perfect for use with data logging, diagnostics and a control module.
VeeCAN Software SDK and Compiler
The VeeCAN 320 has an optional Software Development Kit for programming in C and a Raptor Simulink programming interface. It uses a free linux gcc compiler. Contact sales or vist the webstore for pricing and availability. Application engineering is available to help build your display or provide additional support.
Example Screens
New Eagle develops custom screens and sells a tool that allows a user to easily create their own custom screens, communications and logic on the VeeCAN 320. For more examples, click here.
VeeCAN 320 Lite
The VeeCAN 320 lite display houses a 3.5" color display with CAN and USB compatibility. Perfect for use as a data logger or a sensor module.
VeeCAN 320 J1708
The VeeCAN 320 J1708 display houses a 3.5" color display with 7 analog inputs, 3 digital inputs, 4 outputs, 2 CAN channels, 1 J1708 Serial and 1 USB 2.0. Perfect for use with data logging, diagnostics and a control module.
VeeCAN 320 LP (Low Profile)
The VeeCAN 320 Low Profile display features a stylish and sleek profile bezel. The display acts as a reader and/or data logger for monitoring of your engine's key parameters. It is the next generation of compact, highly flexible, rugged CAN bus displays. Electrically and environmentally rugged, the VeeCAN 320 Lite is ready to meet the challenges of providing tough, flexible instrumentation for harsh environments.
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
VeeCAN 320 LP
|
Buy Now
|
Datasheet
|
--
|
VeeCAN 320 LPL (Low Profile - LITE)
The VeeCAN 320 Low Profile LITE display features a stylish and sleek profile bezel. The display acts as a reader and/or data logger for monitoring of your engine's key parameters. It is the next generation of compact, highly flexible, rugged CAN bus displays. Electrically and environmentally rugged, the VeeCAN 320 Lite is ready to meet the challenges of providing tough, flexible instrumentation for harsh environments.
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
VeeCAN 320 LPL
|
Buy Now
|
Datasheet
|
--
|
VeeCAN 128
The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with 4 warning LED's, 4 tactile buttons, a 6 pin connector, CAN 2.0B and one USB 2.0.
KAntrak 1700
KAntrak 1700, A rugged 3"x3" device containing a compact LCD display, perfect for harsh condition testing and diagnostics. It comes with GEM (Generic Engine Monitor) installed as standard.
KAntrak 2700 / CANtrak 7200
The KAntrak 2700/CANtrak 7200 is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities.
KAntrak 2710 / CANtrak 7210
The KAntrak 2710/CANtrak 7210 is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities. This version contains a built-in heater for extreme low-temperature operation.
KAntrak 2710 CSA
The KAntrak 2710 CSA is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities. This version contains a built-in heater for extreme low-temperature operation, and CSA certification.
Special Application Displays
NMEA2000 Universal Engine Gateway / Monitor
The NMEA2000 Universal Engine Gateway and Monitor converts analog and J1939 CAN messages to NMEA 2000. This is a useful device for upgrading boats with older engines to the newer NMEA instrumentation options. It is a useful tool used for converting and displaying all types of engine information. This comes fully stocked with a day and night mode, waterproof casing, and a full 320 x 240 color display.
VeeCAN 320 MotoHawk Slave
The VeeCAN 320 MotoHawk Slave—in conjunction with a custom Simulink library—allows developers to easily send data from a MotoHawk ECU to a pre-programmed display without having to create a custom display application using a display SDK.
KAntrak 1700 with MiniView Application
The KAntrak 1700 with MiniView Application is a small rugged gauge that is designed to operate in harsh marine and off-highway applications. It is a nice to replace classic 2" MiniView gauges.
VeeCAN 128 with MiniView Application
The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with 4 warning LED's, 4 tactile buttons, a 6 pin connector, CAN 2.0B and one USB 2.0.
Gauges
J1939 CAN Gauges
New Eagle is proud to offer a selection of VeeThree's J1939 Direct Connect Serial Gauges. These Gauges connect directly to the CAN bus and require no additional devices to drive them. The 2" gauges are powered by a smooth stepper motor for 270° of operation. All displays have LED back-lighting for excellent night visibility and are SAE J1939 compliant. These displays are sealed to IP67 immersion standards and feature an anti-fog coating on the inside of the lens to minimize fogging.
Tachometer
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC01
|
Buy Now
|
Datasheet
|
--
|
Oil Pressure
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC02
|
Buy Now
|
Datasheet
|
--
|
Temperature
Picture
|
Part Nunmber
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC03
|
Buy Now
|
Datasheet
|
--
|
Hydraulic Oil Temperature
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC04
|
Buy Now
|
Datasheet
|
--
|
Hydraulic Oil Pressure
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC05
|
Buy Now
|
Datasheet
|
--
|
Auxiliary Temperature 1
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC06
|
Buy Now
|
Datasheet
|
--
|
Auxiliary Temperature 2
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
GAGE-J1939-DC07
|
Buy Now
|
Datasheet
|
--
|
GPS Speedometer
Discontinued Displays & Gauges
CANvu 350
Picture
|
Part Number
|
Webstore
|
Downloads
|
More Information
|
|
CANvu VEM 400N
CANvu VEM 800N
|
This product has been discontinued.
|
Datasheet
|
More Details
|
Recommended Replacement: VeeCAN 320 or VeeCAN 800
MiniView 2" Round
|
|
| |
|
|
|
|
|
|