Engine Control

This page is currently under construction and will be added into the wiki once it is complete

CAM and Crank Signal Generator

The New Eagle CAM and Crank Signal Generator is a 2-channel arbitrary waveform generator that simulates low frequency, digital CAM and Crank signals.

Generic Engine Controller

The New Eagle Generic Engine Controller includes all of the hardware and software needed to begin basic engine testing. It is perfect for anyone with a new engine

MotoHawk Blockset

The MotoHawk Blocks support many different behaviors including I/O, fault management, calibration, online viewing via calibration tools, and many more.

MotoHawk Block Categories

A	E	L
MotoHawk Advanced Digital I/O Blocks	MotoHawk Encoder Blocks	MotoHawk Lookup Table Blocks
MotoHawk Analog I/O Blocks	MotoHawk Extra Development Blocks
B	F	S
MotoHawk Build Blocks	MotoHawk Fault Management Blocks	MotoHawk Serial I/O Blocks
	MotoHawk Fixed Point Blocks	MotoHawk System Debug Blocks
C	J	T
MotoHawk Calibration & Probing Blocks	MotoHawk J1850 Blocks	MotoHawk Target Definition Blocks
MotoHawk CAN Blocks		MotoHawk Trigger Blocks
MotoHawk Component Blocks
MotoHawk CCP Slave Blocks
D	K
MotoHawk Data Storage Blocks	MotoHawk Knock Blocks
MotoHawk Diagnostic Blocks
MotoHawk Digital I/O Blocks

Target Definition Block

ECM5554-112 Target Definition

MotoHawk Target Definition Block target names to use:

ECM-5554-112-0902-kD: PCM0902 module with knock development interface, DV release hardware
ECM-5554-112-0902-kP: PCM0902 module with knock development interface, PV release hardware
ECM-5554-112-0902-xD: PCM0902 module, DV release hardware
ECM-5554-112-0902-xP: PCM0902 module, PV release hardware

Use this target for ECM-5554-112-0902-F00 ("PROD") and ECM-5554-112-0902-CP0 ("DEV") modules.

ECM-5554-112-0904-xD: PCM0904 module, DV and PV release hardware

Use this target for ECM-5554-112-0904-F00 ("PROD") and ECM-5554-112-0904-CP0 ("DEV") modules.