EV-Components

New Eagle > Products Wiki > Electric & Hybrid

Introduction

New Eagle delivers EV Solutions that are scalable from the tools to develop, templates to use, components, and people to apply the solution.

Planning Guide

New Eagle has an extensive supplier network to provide the best validated components for electric and hybrid vehicles at competitive prices. We also have an an experienced products team that can help you engineer the best solution.

For assistance in the selection of components for your application, please request our eBook or send email to sales for assistance. Otherwise, please enjoy our EV & HEV product wiki.

Supervisory Controller

Supervisory Control Software

New Eagle has created a software template to enable rapid electric vehicle development. It is designed to interface with a variety of EV components and serves as a solid foundation for
future development. The software includes validated startup/shutdown sequencing, torque management, component control, and diagnostic strategies. It is available for either the Raptor or
MotoHawk tool chain, and New Eagle will work with the customer to specify an appropriate controller based on the customer requirements. New Eagle offers two options for providing the EV
supervisory software template:

New Eagle Maintains Code

In the first option, New Eagle will customize the template according to customer requirements. Source code is kept and maintained by New Eagle. Typically, the software and calibration
modifications require additional support from New Eagle in the form of an engineering contract. This option also includes a software license fee in any production supply agreement.

Picture	Part Number	Webstore	Downloads
	SW-NE-EVS-001	Please contact sales	-

Customer Maintains Code

In the second option, the customer purchases and receives the template source code (this includes the project directory and MATLAB® Simulink® files). With the appropriate licenses, the
customer can modify and customize the source code per their requirements. If desired, New Eagle can provide additional development assistance with an engineering contract.

Picture	Part Number	Webstore	Downloads
	NE-EV Supervisor-001	[Purchase]	Datasheet

Supervisory HW Controller Options

New Eagle provides controllers for EV supervisor, also known as the EV Vehicle Control Unit (VCU). Off the shelf controllers commonly used as VCUs include the following:

GCM-5634M-070-1562 (GCM70)

Processor	Inputs	Outputs	Communications	Operating Voltage
MPC5634M, 80 MHz	28	26	2 CAN 2.0B	8-32VDC

Picture	Part Number	Webstore	Datasheet Downloads	More Information and Other Downloads
	GCM-5634M-70-1562	Please Contact Sales	Datasheet	More Details

GCM-1793-196-1503 (GCM196)

Processor	Inputs	Outputs	Communications	Operating Voltage
260 MHz Infineon Tricore TC1793	45	45	3 CAN, 1 LIN	6-16VDC

Picture	Part Number	Webstore	Downloads	More Information
	GCM-1793-196-1503	Purchase	Datasheet	More Details

Electric Motors

MAGELEC Motors

MAGELEC's full line of axial flux permanent magnet motors has been designed to deliver high torque and power density with high efficiency throughout the operating range.

MAGELEC M19

Picture	Part Number	Webstore	Downloads
	MAG-M19Px-S-19	Please contact sales	Datasheet
	MAG-M19Px-D-19	Please contact sales	Datasheet

MAGELEC M21

Picture	Part Number	Webstore	Downloads
	MAG-M21Px-S-21	Please contact sales	Datasheet
	MAG-M21Px-D-21	Please contact sales	Datasheet

MAGELEC M24

Picture	Part Number	Webstore	Downloads
	MAG-M24Px-S-24	Please contact sales	Datasheet
	MAG-M24Px-D-24	Please contact sales	Datasheet

MAGELEC M27

Picture	Part Number	Webstore	Downloads
	MAG-M27Px-S-27	COMING SOON	Datasheet
	MAG-M27Px-x-27	COMING SOON	Datasheet

MAGELEC M34

Picture	Part Number	Webstore	Downloads
	MAG-M34Px-S-34	COMING SOON	COMING SOON

Remy Motors (Now BorgWarner)

REM-HVH250 Series

Remy’s HVH250 Series is a scalable motor with options for stack length, cooling and conductor configurations. They are available in housings, cartridges or as stator/rotor assemblies.

Picture	Part Number	Winding Type	Webstore	More Information
	BW-HVH250-115-DOC	Dual	PURCHASE	More Details White Paper Accessories
	BW-HVH250-90-DOC	Dual	PURCHASE
	BW-HVH250-90-DOM	Dual	PURCHASE
	BW-HVH250-90-SOM	Serial	PURCHASE
	BW-HVH250-115-DOM	Dual	PURCHASE
	BW-HVH250-115-SOM	Serial	PURCHASE
	BW-HVH250-115-SOC	Serial	Please Contact Sales
	BW-HVH250-90-SOC	Dual	Please Contact Sales

*Datasheets are not available for all of the possible motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.

REM-HVH410 Series

The new HVH410 is a powerful, rugged electric motor designed to drive heavy-duty and off-road vehicles, in addition to special equipment and power generation applications.
The HVH410 is compact, and has options for different stack lengths, cooling and conductor configurations. They are available in housings or as stator/rotor assemblies.

Picture	Part Number	Webstore	Downloads	More Information
	BW-HVH410-75-DOM	PURCHASE	Datasheet*	More Details
	BW-HVH410-150-DOM	PURCHASE	Datasheet*	More Details

*Datasheets are not available for all of the possible motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.

Parker Motors

Designed for the demanding applications found in today’s high-performance electric and hybrid vehicles, Parker’s GVM (Global Vehicle Motor) Series of traction
motors offer lower weight and higher power in a smaller package than other traction motors on the market.

GVM 142
The GVM 142 is Parker's newest motor designed for electric and hybrid vehicle applications. It includes a 142 mm frame size with an SAE A adapter mount.
It attains 95% efficiency, and is compliant with SAE J1455 environmental standards. Typical applications include electric power steering, motor generator unit,
electric fans, etc.

Picture	Part Number	Webstore	Downloads	More Information
	GVM 142	Please contact sales	Datasheet	More Details

GVM 210
The GVM210 Traction Motor is designed to meet the power requirements of a wide variety of vehicle applications. The GVM has the ability to operate at different
bus voltages, without loss of power. It achieves 95% efficiency.

Picture	Part Number	Webstore	Downloads	More Information
	GVM 210	Please contact sales	Datasheet	More Details

UQM Motors

UQM motors are sold as a package that includes a motor and inverter.

PowerPhase HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94 percent efficiency,
these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive,
lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 950 HD HiTor UQM-HD-950T	-	Datasheet	More Details

PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95 percent efficiencies, these systems
consist of a high performance, liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase Pro 100 UQM-PP-100	-	Datasheet	More Details
	PowerPhase Pro 135 UQM-PP-135	-

PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95 percent efficiencies, these systems consist of a
high performance liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for medium to heavy duty truck, bus, marine, locomotive, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 220 HD UQM-HD-220	-	Datasheets	More Details
	PowerPhase Pro 250 UQM-HD-250	-

*Datasheet is available with non-disclosure agreement and direct contact with sales.
**PowerPhase Pro 100/135 cable lengths are preset, only large volume orders include custom length cables.

Yasa Motors

Yasa P400

The YASA P400 Series of motor / generators are manufactured using advanced materials and proprietary construction techniques to enable high-volume production with significant customer cost benefits.

Picture	Part Number	Webstore	Downloads
	Yasa P400	Please contact sales	Datasheet

Yasa 750R

The YASA 750R was developed as a low-speed, high-torque motor with leading torque and power densities. This motor is used in numerous industries and applications.

Picture	Part Number	Webstore	Downloads
	Yasa 750R	Please contact sales	Datasheet

Traction Inverters

New Eagle supplies a variety of inverters. If needed, New Eagle can help you choose the best inverter solution for your project. Please contact us for more information.

John Deere Electronic Solutions

JD-PD400 Single
The PD400 traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD400 can produces 150-300 KVA output power depending on the configuration and weighs a mere 17.3 kg.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD400S-PROTO	Please contact sales	Datasheet	More Details

PHO-PD400 Dual

The PD400 Dual traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD400 Dual can produces 150-300 KVA output power depending on the configuration and weighs 30.4 kg.

Picture	Part Number	Webstore	Downloads	More Information
	JD-PD400D-PROTO	Please contact sales	Datasheet	More Details

Sevcon

*NOTE: It is highly recommended that the SEVCON-IXXAT-KIT be purchased with an inverter.

Sevcon GEN4-S4

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	SEV-GEN4-S4-80V	Purchase	Datasheet	More Details

Sevcon GEN4-S6

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	SEV-GEN4-S6-48V	Purchase	Datasheet	More Details
	SEV-GEN4-S6-80V	Purchase

SEV-GEN4-S8-001
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact,
rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drive train system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S8-001	Purchase	Datasheet	More Details

SEV-GEN4-S10-001
The gen4, size 10 AC motor controller is designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV).
Its high voltage range, up to 800VDC, is well matched to the needs of the automotive, agricultural and commercial transport markets. The same hardware platform
handles both AC Induction and Permanent Magnet AC motor technologies.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-GEN4-S10-001	Purchase	Datasheet	More Details

SEV-GEN5
The Gen5 range of motor controllers utilise a highly flexibility control logic architecture to deliver unique feature rich set of functions is well matched to satisfy automotive,
commercial and construction markets electrification needs. The range of High Voltage High Power (HVHP) controllers is specifically aimed at vehicle OEM’s and system integrators
to offer them a compact, lightweight, rugged and cost effective class leading suite of solutions covering traction, hybridisation, power generation and sub-system electrification.

Picture	Part Number	Webstore	Downloads	More Information
	(Coming Soon)	Please contact sales	Datasheet	--

SEV-HVLP-10 - Air Cooled
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of high voltage, low power inverters designed
for both on-road and off-road applications. The HVLP AC Motor Controllers work with Permanent Magnet and Induction motors. A compact, rugged and cost-effective
design, Sevcon’s HVLP Inverter is well-suited for OEMs, hybrid/electric bus & truck conversions, agricultural OEMs and EV system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-HVLP-10	Purchase	Datasheet	More Details

SEV-HVLP-20 - Water/Glycol Cooled
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of high voltage, low power inverters designed
for both on-road and off-road applications. The HVLP AC Motor Controllers work with Permanent Magnet and Induction motors. A compact, rugged and cost-effective
design, Sevcon’s HVLP Inverter is well-suited for OEMs, hybrid/electric bus & truck conversions, agricultural OEMs and EV system integrators.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-HVLP-20	Purchase	Datasheet	More Details

SEV-IXXAT-KIT
SEVCON IXXAT adapter harness with DVT software.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-IXXAT-KIT	Purchase		More Details

UQM

UQM motors are sold as a package that includes a motor and inverter.

PowerPhase 55 HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94 percent efficiency,
these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive,
lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 950 HD HiTor UQM-HD-950T	-	Datasheet	More Details

PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95 percent efficiencies, these systems
consist of a high performance, liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase Pro 100 UQM-PP-100	-	Datasheet	More Details
	PowerPhase Pro 135 UQM-PP-135	-

PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95 percent efficiencies, these systems consist of a
high performance liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for medium to heavy duty truck, bus, marine, locomotive, military and industrial vehicles.

Picture	Part Number	Webstore	Downloads	More Information
	PowerPhase 220 HD UQM-HD-220	-	Datasheets	More Details
	PowerPhase Pro 250 UQM-HD-250	-

*Datasheet is available with non-disclosure agreement and direct contact with sales.

Rinehart Motion

RMS PM Series
The RMS AC Traction Controllers are designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The PM-Series family is typically the
lightest and smallest inverter for its power due to its high heat flux thermal design approach.

Picture	Part Number	Webstore	Downloads	More Information
	RMS-PM-100DX	Purchase	Datasheet	More Details
	RMS-PM-100DZ	Purchase
	RMS-PM-150DX	Purchase
	RMS-PM-150DZ	Purchase
	RMS-PM-250DX	Purchase	Datasheet
	RMS-PM-250DZ	Purchase

RMS RM Series

Picture	Part Number	Webstore	Downloads	More Information
	RMS-RM-100DZ	Please contact sales	Datasheet	More Details

HV Accessories

Onboard Chargers

Bel Power Solutions

Picture	Part Number	Webstore	Downloads	More Information
	BEL-350INVCH150-120-240-xG	Please contact sales	Datasheet	More Details

15 kW Inverter/Charger
he Bel Power Solutions 350INVCHGT150-120-240-8G is a 15 kW inverter/charger that converts AC to DC voltages in charge mode and converts DC voltages to pure sine wave AC in standalone or utility mode. In the standalone mode the inverter/charger could supply some AC accessories and in the utility mode is able to push energy back to the grid. The liquid cooled inverter/charger operates at 250-435 VDC and 120/240 VAC (50/60 Hz) split-phase. The inverter charger powers up to 15 kW in either direction. Features include very high efficiency, high reliability, low total harmonic distortion (AC), low output voltage noise (DC), and excellent dynamic response to load/input changes.

Picture	Part Number	Webstore	Downloads	More Information
	BEL-350INVCHGT150-120-240-8G	Please contact sales	Datasheet	More Details

EDN

Please complete EDN form when purchasing.

[CLICK HERE]

7kW CMP375

Picture	Part Number	Webstore	Downloads	More Information
	TBD	Please contact sales	Datasheet	More Details

11kW EVO11KA

Picture	Part Number	Webstore	Downloads	More Information
	EDN-EV011-KAR4	Please contact sales	Datasheet	More Details

11kW EVO11KL

Picture	Part Number	Webstore	Downloads	More Information
	EDN-EVO11-KLR4	Please contact sales	Datasheet	More Details

12kW CMP419

Picture	Part Number	Webstore	Downloads	More Information
	EDN0-CMP419	Please contact sales	Datasheet	More Details

22kW EVO22KL

Picture	Part Number	Webstore	Downloads	More Information
	EDN-EVO2-KLR_	Please contact sales	Datasheet	More Details

Current Ways Chargers

Picture	Part Number	Webstore	Downloads	More Information
	CW-6.6OBC-001	Purchase	Datasheet

Ovartech Chargers

On-board 6.6kW Liquid-Cooled Charger
The Ovartech 6.6KW on-board charger series is designed for electric vehicle battery charging with demand for efficiency, robustness and safety. The electrical input voltage ranges from AC 85~265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes the charging more economical. It provides intelligent charging mode which adjusts the voltage in CC/CV/cut off automatically. It also features short-circuit, over voltage, over current and over temperature protections under charging. The CAN-bus interface delivers message with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System). CAD662DF-400A charger series is in compliance with SAE J1772 and IEC 61851 to meet international standard, and with IP 67 for critical operating environment.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-OBC-01	Please contact sales	Datasheet

DC-AC Inverters

Bel Power Solutions

400V DC to 120/240V AC Inverter
The Bel Power Solutions 350INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 240 to 430 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.

Picture	Part Number	Webstore	Downloads	More Information
	BEL-350INV60-120-240-9G	Purchase	Datasheet	More Details

700V DC to 120/240V AC Inverter
The Bel Power Solutions 700INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 400 to 850 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.

Picture	Part Number	Webstore	Downloads	More Information
	BEL-700INV60-120-240-9G	Please contact sales	Datasheet	More Details

DC-DC Converters

Bel Power Solutions

4kW DC-DC Converter
The Bel Power Solutions DNC Series of 4 kW DC/DC Converters creates DC voltages in hybrid and electric vehicles suitable to power low voltage accessories. The liquid cooled or convection cooled DC/DC converter operates at wide range of input voltages and delivers power range up to 4000 W / 3300 W (liquid / natural cooled version). Features include very high efficiency (up to 93%), high reliability, low output voltage noise, and excellent dynamic response to load/input changes.

Picture	Part Number	Webstore	Downloads	Connector Kits
	BEL-350DNC40-12-8G	Purchase	Datasheet	BEL-350DNC40-CON-KIT-8G (Includes Cable) - or - BEL-350DNC40-CON-KIT-9G
	BEL-350DNC40-12-CG	Purchase	Datasheet
	BEL-350DNC40-24-8G	Purchase	Datasheet
	BEL-350DNC40-24-CG	Purchase	Datasheet
	BEL-700DNC40-12-8G	Purchase	Datasheet	BEL-700DNC40-CON-KIT-8G (Includes Cable) - or - BEL-700DNC40-CON-KIT-9G
	BEL-700DNC40-12-CG	Purchase	Datasheet
	BEL-700DNC40-24-8G	Purchase	Datasheet
	BEL-700DNC40-24-CG	Purchase	Datasheet

Sevcon

Sevcon DC/DC Converters
The Sevcon 500W & 1.2WK DC/DC converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and to be connected permanently to the battery. These fully encapsulated converters deliver a stable, isolated high power.

Picture	Part Number	Webstore	Downloads	More Information
	SEV-80V-500W-001	Purchase	Datasheet	More Information
	SEV-GEN5-DCDC-001	Please contact sales	Datasheet	More Information

Axiomatic

The DC/DC converter is suitable for application on charging/cranking battery-based systems. Power from a vehicle battery is conditioned at the same voltage level and isolation is provided to protect onboard electronic devices.

Picture	Product Name	Part Number	Webstore	Downloads	More Information
	Axiomatic Isolated 24VDC/24VDC Converter	AX081530	Purchase	Datasheets	-
		AX081530K (with 2mm cable)	Purchase

Axiomatic Isolated 24Vdc/24Vdc Converter
The DC-DC Converter provides clean 24VDC power suitable for instrumentation and control networks or process equipment. For operation under the most harsh and demanding conditions, the unit is fully sealed and enclosed to protect against moisture, shock and vibration. Power from a battery or other source in the range of 11-32VDC is converted to a 24VDC output regulated to 1%. Input and output isolation is provided. The unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a 24V input, the nominal nameplate rating is 120 Watts of output power. With a 12V input, the nominal nameplate rating is 95 Watts of output power. The DC-DC Converter has an efficiency rated at >90%.

Picture	Part Number	Webstore	Downloads	More Information
	AX-PSU1K	Purchase	Datasheet	--

Ovartech DC-DC

EV/HEV DC/DC Converter 1.5KW/1500W
The Ovartech range of DC/DC Converters are suitable for a wide range of electric powered vehicles and are specifically designed to be fitted on-board the vehicle and connected permanently to the battery. This range of High Voltage DC/DC products are designed to satisfy the current trend to use higher battery voltages between 108Vdc to 800Vdc which are converted to lower voltages to power ancillary loads. Options include nominal 12Vdc output, with exact output voltage set using a CAN communications command.

The products can satisfy a range of power requirements from 1kW to 12kW (when paralleled only). The High Voltage DC/DC range is designed to offer full performance across the temperature range of -40˚C to +45˚C (air cooled) and +65˚C (liquid cooled). It has many protection features such as input UVLO, input OVLO, input reverse polarity, current limit, output short circuit and over temperature. The CAN communications features allow the units to be enabled and disabled with communications messages.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-DCDC-002	Please contact sales	Datasheet

Onboard Charger / DC-DC Converters

Ovartech OBC/DC-DC

6.6KW OBC+2KW DC-DC Liquid-cooled
The Ovartech CAD662DF400-14202 is a combination high-frequency 6.6KW battery charger and 2KW DC/DC converter in one package, Integrated high-frequency battery charger andDC/DC converter saves space, weight, and cabling thereby minimizing the cost of inventory, installation, and service.

CAD662DF400-14202 on-board charger series is designed for electric vehicle battery chargingwith demand for efficiency, robustness and safety. The electrical input voltage for CAD662DF400-14202 ranges from AC 85~265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes the charging more economical. CAD662DF400-14202 provides intelligent charging mode which adjusts the voltage in CC/CV/cut off automatically. It also features short-circuit, over voltage, over current and over temperature protections under charging. The CAN-bus interface delivers message with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System). CAD662DF400-14202 charger series is in compliance with SAE J1772 and IEC 61851 to meet international standard, and with IP 67 for critical operating environment.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-OBC-DCDC-01	Please contact sales	Datasheet

Ovartech OBC/DC-DC/PDU

6.6KW OBC+1KW DC-DC Liquid-cooled+PDU
Combination high-frequency battery charger + DC/DC converter + power distribution unit (PDU) in one package.

Picture	Part Number	Webstore	Downloads	More Information
	OVAR-OBC-DCDC-PDU-01	Please contact sales	Datasheet

Heating and Cooling

High Voltage Air Conditioning

New Eagle offers a high voltage air compressor unit for EV and HEV applications. The EV36BNx operates between 270-440 VDC and has 36cc/rev of displacement.

Picture	Part Number	Webstore	Downloads	More Information
	EV36BNKx	Purchase	Please contact sales*	Specifications

*Datasheet is available with non-disclosure agreement and direct contact with sales.

High Voltage PTC Heating Unit

New Eagle offers a PTC (Positive Temperature Coefficient) heating unit for EV and HEV applications. It operates between 220 and 400VDC and has a heating capacity of 5kW @334V, 360L/h

Picture	Part Number	Webstore	Downloads	More Information
	MI-G2PTC-HEAT Limited Availability	Please contact sales	Please contact sales*	Specifications

Picture	Part Number	Webstore	Downloads	More Information
	MI-EWH40DX	Please contact sales	Please contact sales	Specifications

*Datasheets available with non-disclosure agreement and direct contact with sales.

Isometers

Bender Isometers

The ISOMETER® monitors the insulation resistance between the active HV components of an electrical drive system (Un = DC 0 V…600 V) and the reference earth (chassis ground). The patented measurement technology is used to monitor the condition of the insulation on the DC side as well as on the AC motor side of the electrical drive system

Picture	Part Number	Webstore	Downloads	More Information
	BEN-ISO175C-1	Purchase	Datasheet	Please contact sales
-	BEN-CONKIT-ISO175C-1	Purchase	Datasheet	Please contact sales

LV Accessories

Cooling Pumps

Full Cooling System

New Eagle presents 5KW and 10KW cooling systems for the Borg Warner HVH250 motor. This kit includes pump, cooling coil and fan, hoses and accessories.

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	VAX-COL-5KW (5KW) VAX-COL-10KW (10KW)	Please contact sales	Please contact sales	Datasheet

Oil Pumps

EMP OP 35

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	EMP-OP35-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales
	EMP-SERV-KIT-01	Please contact sales	Datasheet	Please contact sales

EMP OP 40i

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	EMP-OP40i-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

EMP OP 80c

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	EMP-OP80c-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

EMP OP 40c

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	EMP-OP40c-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

EMP OP 3530c (Coming Soon)

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	EMP-OP3530c-01	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales

Water Pumps

EMP WP 29

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	EMP-WP29-01 (12 volt)	Please contact sales	Datasheet	Please contact sales
	EMP-WP29-02 (24 volt) EMP-WP29V-02 (24 volt, vertical mount)	Please contact sales	Datasheet	Upon Request: User Manual CAD Drawing Please contact sales
	EMP-SERV-KIT-01	Please contact sales	Datasheet	Please contact sales

Displays

VeeCAN 320 EV Display

The VeeCAN 320 EV Display is a Raptor VeeCAN320 Lite that is pre-programmed with EV display software. The display easily integrates into your system and is already configured to display fundamental EV parameters, such as battery SOC, motor speed, drive mode, and faults.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-DISP-MH-EV-01	Purchase	User Manual splash_update.zip	More Details

Raptor VeeCAN 800

A larger option to the VeeCAN 320 EV Display is the Raptor VeeCAN 800. This device is not pre-programmed with EV display software like VeeCAN 320 EV Display; however, users can choose to develop display software themselves using Raptor-Dev or hire New Eagle to develop custom display software for their application.

The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.

Picture	Part Number	Webstore	Downloads	More Information
	DISP-VC800-1402	Purchase	Datasheet Programming Guide Custom Data Logger Guide	More Details Display Examples

Specialty IO Devices

Foot Pedals

New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power from 2 independent power supplies and output voltages between 0 & 5 V and 0 & 2.5 V. We also sell a connector kit for developing a harness that fits your needs. We have both firewall and floor mounted models.

Floor Mount Foot Pedal

Picture	Part Number	Webstore	Downloads	More Information
	EFP-136-01	Please contact sales	-	Schematics

Firewall Mount Foot Pedal

Picture	Part Number	Webstore	Downloads	More Information
	EFP-139-00	Please contact sales	-	Schematics

In the event that you want to interrupt the accelerator pedal or need to create a pedal signal output, you can try our PWM to Analog Converter.

Pedal Emulator

The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.

Picture	Product Name	Part Number	Webstore	More Information
	PWM to Analog Converter (Pedal Emulator)	PWM-AN-024-1403	Buy Now	More Details

Power Distribution

Relay and Fuse Box

The New Eagle™ Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages.

Picture	Product Name	Part Number	Webstore	Downloads	More Information
	Multiplexed Power Distribution Module	MPDM-NE1	Purchase	Datasheets	More Details
		MPDM-31M-300-0	Purchase

Solid-State Relay Control Device

The CM0410 is a general purpose input / output module that includes a single J1939 CAN interface, 4 inputs, 1 high side current measurement pass-through, and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus.

Picture	Part Number	Webstore	Downloads	More Information
	CM0410	Purchase	Datasheet Configuration Tool Download	More Details

Power Distribution Unit

The New Eagle™ Power Distribution Unit (PDU) provides a solution to electric and hybrid electric vehicle high voltage distribution. It is environmentally
sealed and designed for multiple output configurations. The PDU is designed to work with the low side drivers of any New Eagle™ controller to provide easy integration and control.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-PDU-NE1	Purchase	Datasheet	More Details

Manual Service Disconnect

The Manual Service Disconnect (MSD) offers a solution to safely remove an internal HV battery pack without short circuiting using a two stage lever to open the HVIL circuit prior to separation of HV contacts.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-MSD-250A-001	Purchase	Instruction Sheet Receptacle Drawing Plug Drawing	--

Battery Management Interfaces

Fast Charger

Compatible with nearly any Li-Ion battery system, this vehicle-side interface is perfect for any quick charge solution.

• Available with optional CHAdeMO support
• Design is compact and easy to install
• Simple and cost effective
• Solution for EV projects

Picture	Part Number	Webstore	Downloads	More Information
	LIB-FCI-CHADEMO	Purchase	Datasheet	Coming Soon
	Coming Soon	Please contact sales	Datasheet GBT

J1772 Vehicle Power Interface Module

The New Eagle™ J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with Electric or Plug-In Hybrid Electric (EV/PHEV) vehicles charging equipment in accordance with the SAE J1772 specification.

Picture	Part Number	Webstore	Downloads	More Information
	VPIM-024-1301	Purchase	Downloads	More Details

Battery Systems

New Eagle offers battery products with BMS or the assistance to build a battery using an off-the-shelf or a custom BMS.

Battery Management Systems

Integrated BMS System

New Eagle is pleased to offer a complete BMS solution with robust hardware and software designed to fulfill all of the necessary BMS functions. The offerings are expandable in series for a wide variety of cell chemistry and pack configurations and includes pre-wired harnesses.

Picture	Part Number	Webstore	Downloads	More Information
	ASM-BMS-108-001 ASM-BMS-123-001	Purchase Purchase	Datasheet	More Details

Distributed BMS System

LiBAL s-BMS™ Interface Boards

This battery management system is capable of handling any scale system, adapting to all types of Li-ion batteries, and a standard off the shelf design it fits the project's needs without a redesign.

Benefits:

• Standard design
• Supports up to 256 cells
• Up to 1000 VDC
• Embedded Post-Processing
• Electromagnetic Immunity
• Vibration Resistant
• 27 Error modes

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	LIB-BMCU-001	Purchase	Datasheet	More Information
	LIB-LMU-001	Purchase	Datasheet

*Note: BMS requires management software (see below)

LiBAL s-BMS Harness Kits

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	LIB-HARNKIT-BMCU-01	Purchase	--	Upon Request: Harness Kit Layout User Manual Please contact sales
	LIB-HARNKIT-LMU-01	Purchase	--

LiBAL s-BMS Shunt Kit

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	LIB-SHUNT-500A-C	Purchase	--	Upon Request: User Manual Please contact sales
	LIB-SHUNT-300A-C	Purchase	--
	LIB-SHUNT-200A-C	Purchase	--

LiBAL s-BMS Heat Sink Kit

Picture	Part Number	Webstore	Datasheet Downloads	More Information
[Coming Soon]	LIB-LMU-HS-KIT	Purchase	--	Upon Request: User Manual Please contact sales

LiBAL s-BMS Software

Picture	Part Number	Webstore	Datasheet Downloads	More Information
	LIB-MGT-SW-001 Required for BMS	Purchase	--	Coming Soon Please contact sales
	LIB-SRV-SW-001	Purchase	--

Battery Cell Modules

New Eagle has strategic relationships with battery cell manufacturers and can participate with its customers on the design and sourcing of pack systems. One concept that has been successful is using off the shelf modules with one of our BMS options, enclosed in a housing made by either our engineering team or our customers.

To discuss options, please contact sales@neweagle.net.

Transmissions

Borg Warner

The BorgWarner 31-03 eGearDrive electric-drive transmission is the next generation of technology developed for adaptability across a broad range of applications for the emerging vehicle electrification market. The eGearDrive incorporates high-efficiency geartrain technology contributing to extended batterypowered driving range and high torque capacity with greater than 97% efficiency.

Picture	Part Number	Webstore	Downloads	More Information
	BW-EGD-31-03-8.28	Please contact sales	Datasheet	Please contact sales

Heavy Duty Transmissions

Electric Vehicle Transmission - Medium duty fixed rate reducer

Picture	Part Number	Webstore	Downloads	More Information
	EVT1	Please contact sales	Downloads	Please contact sales

Electric Vehicle Transmission - Medium-Heavy duty 2 speed with reducer

Picture	Part Number	Webstore	Downloads	More Information
	EVT2-R	Please contact sales	Downloads	Please contact sales

Electric Vehicle Transmission -Extra Heavy Duty 2 speed with reducer/Spur gear

Picture	Part Number	Webstore	Downloads	More Information
	EVT2-RHD	Please contact sales	Downloads	Please contact sales

Electric Vehicle Transmission - Heavy duty 4 speed

Picture	Part Number	Webstore	Downloads	More Information
	EVT4	Please contact sales	Downloads	Please contact sales

MAGELEC Gearboxes

MAGELEC Gearboxes

MAGELEC Gearboxes

Picture	Part Number	Webstore	Downloads	More Information
	MAG-F03L-01	Please contact sales	Datasheet	Please contact sales
	MAG-F03T-01	Please contact sales	Datasheet	Please contact sales
	MAG-F06L-01	Please contact sales	Datasheet	Please contact sales
	MAG-F06T-01	Please contact sales	Datasheet	Please contact sales
	MAG-F06V-01	COMING SOON	COMING SOON	COMING SOON
COMING SOON	MAG-F12L-01	COMING SOON	COMING SOON	COMING SOON

}

Discontinued Products

John Deere Traction Inverters

PHO-PD300
The PD300 traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD300 produces 200 KVA output power and weighs a mere 17 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD300-PROD	Purchase	Datasheet	More Details

PHO-PD550 Dual
The PD550 Dual traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD550 Dual produces 300 KVA (x2 outputs) output power and
weighs 64 kg.

Picture	Part Number	Webstore	Downloads	More Information
	PHO-PD550-PROD Dual	Purchase	Datasheet	More Details

Remy Motors (now Borg Warner)

Picture	Part Number	Winding Type	Webstore	More Information
	BW-HVH250-90-DWM	Dual	PURCHASE	More Details White Paper Accessories
	BW-HVH250-90-SWM	Serial	PURCHASE

Delphi 12V, 2.2kW DC-DC Converter

We support many customers of the discontinued Delphi 2.2KW DC-DC Converter. Therefore, we are keeping the data sheet and user manuals available to our customers. New Eagle has built a MotoHawk Library to communicate to and from the DC-DC converter.

Picture	Part Number	Webstore	Downloads	More Information
	Universal 2.2kW DC-DC Converter - Obsolete	Please contact sales	Data Sheet Connector Drawing 3-D CAD (.stp) Drawing	More Details

Shinry Onboard Chargers

3.3kW Liquid Cooled (No longer available)

Picture	Part Number	Webstore	Downloads	More Information
	(No longer available)	Replacement is 6.6kW (below)	Datasheet	Please contact sales

6.6kW Liquid Cooled with SAE 1772

Picture	Part Number	Webstore	Downloads	More Information
	(No longer available)		Datasheet	More details

Shinry DC-DC Converter

Shinry 2kW DC-DC Converter
The Shinry 2kW DC-DC converter is designed for all types of electric vehicle applications. It is liquid cooled and offers an efficiency up to 95%.

Picture	Part Number	Webstore	Downloads	More Information
	SHI-2KW-DC-01	Purchase	Datasheet	More Information