EV-Components: Difference between revisions
Line 166: | Line 166: | ||
MAG-M19Px-S-19 | MAG-M19Px-S-19 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[https://store.neweagle.net/product/magelec-axial-flux-permanent-magnet-motor-m19x-s-19/ Purchase] | '''[https://store.neweagle.net/product/magelec-axial-flux-permanent-magnet-motor-m19x-s-19/ Purchase]''' | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[[MAGELEC_Motors_Downloads|Datasheet]]''' | '''[[MAGELEC_Motors_Downloads|Datasheet]]''' | ||
Line 175: | Line 175: | ||
MAG-M19Px-D-19 | MAG-M19Px-D-19 | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
[https://store.neweagle.net/product/magelec-axial-flux-permanent-magnet-motor-m19x-d-19/ Purchase] | '''[https://store.neweagle.net/product/magelec-axial-flux-permanent-magnet-motor-m19x-d-19/ Purchase]''' | ||
|style = "height:180px; width:180px;"| | |style = "height:180px; width:180px;"| | ||
'''[[MAGELEC_Motors_Downloads|Datasheet]]''' | '''[[MAGELEC_Motors_Downloads|Datasheet]]''' |
Revision as of 21:32, 16 May 2019
New Eagle > Products Wiki > Electric & Hybrid
Introduction
New Eagle delivers EV Solutions that are scalable from the tools to develop, templates to use, components, and people to apply the solution.
Planning Guide
New Eagle has an extensive supplier network to provide the best validated components for electric and hybrid vehicles at competitive prices. We also have an an experienced products team that can help you engineer the best solution.
For assistance in the selection of components for your application, please request our eBook or send email to sales for assistance. Otherwise, please enjoy our EV & HEV product wiki.
Supervisory Controller
Supervisory Control Software
New Eagle has created a software template to enable rapid electric vehicle development. It is designed to interface with a variety of EV components and serves as a solid foundation for
future development. The software includes validated startup/shutdown sequencing, torque management, component control, and diagnostic strategies. It is available for either the Raptor or
MotoHawk tool chain, and New Eagle will work with the customer to specify an appropriate controller based on the customer requirements. New Eagle offers two options for providing the EV
supervisory software template:
New Eagle Maintains Code
In the first option, New Eagle will customize the template according to customer requirements. Source code is kept and maintained by New Eagle. Typically, the software and calibration
modifications require additional support from New Eagle in the form of an engineering contract. This option also includes a software license fee in any production supply agreement.
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
SW-NE-EVS-001 |
Please contact sales |
- |
Customer Maintains Code
In the second option, the customer purchases and receives the template source code (this includes the project directory and MATLAB® Simulink® files). With the appropriate licenses, the
customer can modify and customize the source code per their requirements. If desired, New Eagle can provide additional development assistance with an engineering contract.
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
NE-EV |
[Purchase] |
Supervisory HW Controller Options
New Eagle provides controllers for EV supervisor, also known as the EV Vehicle Control Unit (VCU). Off the shelf controllers commonly used as VCUs include the following:
GCM-5634M-070-1562 (GCM70)
Processor | Inputs | Outputs | Communications | Operating Voltage |
---|---|---|---|---|
MPC5634M, 80 MHz |
28 |
26 |
2 CAN 2.0B |
8-32VDC |
Picture | Part Number | Webstore | Datasheet Downloads | More Information and Other Downloads |
---|---|---|---|---|
GCM-5634M-70-1562 |
Please Contact Sales |
GCM-5607B-080-1901 (GCM80)
Processor | Inputs | Outputs | Communications | Operating Voltage |
---|---|---|---|---|
MPC5607B, 64 MHz |
32 |
16 |
4 CAN 2.0B |
9-16VDC |
Picture | Part Number | Webstore | Datasheet Downloads | More Information and Other Downloads |
---|---|---|---|---|
GCM-5607B-080-2001
GCM-5607B-080-1903 |
Please Contact Sales |
GCM-1793-196-1503 (GCM196)
Processor | Inputs | Outputs | Communications | Operating Voltage |
---|---|---|---|---|
260 MHz Infineon Tricore TC1793 |
45 |
45 |
3 CAN, 1 LIN |
6-16VDC |
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
GCM-1793-196-1503 |
Electric Motors
AVID Motors
AVID's EVO axial flux electric motors are built with low inertia composite rotors for excellent rotor dynamic stability.
AVID EVO AF130
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
AVID-EVO-130 |
Please contact sales |
AVID EVO AF140
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
AVID-EVO-140 |
Please contact sales |
AVID EVO AF230
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
AVID-EVO-230 |
Please contact sales |
AVID EVO AF240
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
AVID-EVO-240 |
Please contact sales |
MAGELEC Motors
MAGELEC's full line of axial flux permanent magnet motors has been designed to deliver high torque and power density with high efficiency throughout the operating range.
MAGELEC M19
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
MAG-M19Px-S-19 |
|||
MAG-M19Px-D-19 |
MAGELEC M21
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
MAG-M21Px-S-21 |
Please contact sales |
||
MAG-M21Px-D-21 |
Please contact sales |
MAGELEC M24
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
MAG-M24Px-S-24 |
Please contact sales |
||
MAG-M24Px-D-24 |
Please contact sales |
MAGELEC M27
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
MAG-M27Px-S-27 |
|
||
MAG-M27Px-x-27 |
|
MAGELEC M34
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
MAG-M34Px-S-34 |
|
|
Remy Motors (Now BorgWarner)
REM-HVH250 Series
Remy’s HVH250 Series is a scalable motor with options for stack length, cooling and conductor configurations. They are available in housings, cartridges or as stator/rotor assemblies.
Picture | Part Number | Winding Type | Webstore | More Information |
---|---|---|---|---|
BW-HVH250-115-DOC |
Dual | |||
BW-HVH250-90-DOC |
Dual |
|||
BW-HVH250-90-DOM |
Dual |
|||
BW-HVH250-90-SOM |
Serial |
|||
BW-HVH250-115-DOM |
Dual |
|||
BW-HVH250-115-SOM |
Serial |
|||
BW-HVH250-115-SOC |
Serial |
Please Contact Sales | ||
BW-HVH250-90-SOC |
Dual |
Please Contact Sales |
*Datasheets are not available for all of the possible motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.
REM-HVH410 Series
The new HVH410 is a powerful, rugged electric motor designed to drive heavy-duty and off-road vehicles, in addition to special equipment and power generation applications.
The HVH410 is compact, and has options for different stack lengths, cooling and conductor configurations. They are available in housings or as stator/rotor assemblies.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BW-HVH410-75-DOM |
||||
BW-HVH410-150-DOM |
*Datasheets are not available for all of the possible motor configurations. However, New Eagle can provide detailed data for all of the motors upon request.
Parker Motors
Designed for the demanding applications found in today’s high-performance electric and hybrid vehicles, Parker’s GVM (Global Vehicle Motor) Series of traction
motors offer lower weight and higher power in a smaller package than other traction motors on the market.
GVM 142
The GVM 142 is Parker's newest motor designed for electric and hybrid vehicle applications. It includes a 142 mm frame size with an SAE A adapter mount.
It attains 95% efficiency, and is compliant with SAE J1455 environmental standards. Typical applications include electric power steering, motor generator unit,
electric fans, etc.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
GVM 142 |
Please contact sales |
GVM 210
The GVM210 Traction Motor is designed to meet the power requirements of a wide variety of vehicle applications. The GVM has the ability to operate at different
bus voltages, without loss of power. It achieves 95% efficiency.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
GVM 210 |
Please contact sales |
UQM Motors
UQM motors are sold as a package that includes a motor and inverter.
PowerPhase HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94 percent efficiency,
these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive,
lightweight commercial, marine, military and industrial vehicles.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PowerPhase 950 HD HiTor |
- |
PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95 percent efficiencies, these systems
consist of a high performance, liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PowerPhase Pro 100 |
- | |||
PowerPhase Pro 135 |
- |
PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95 percent efficiencies, these systems consist of a
high performance liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for medium to heavy duty truck, bus, marine, locomotive, military and industrial vehicles.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PowerPhase 220 HD |
- | |||
PowerPhase Pro 250 |
- |
*Datasheet is available with non-disclosure agreement and direct contact with sales.
**PowerPhase Pro 100/135 cable lengths are preset, only large volume orders include custom length cables.
Yasa Motors
Yasa P400
The YASA P400 Series of motor / generators are manufactured using advanced materials and proprietary construction techniques to enable high-volume production with significant customer cost benefits.
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
Yasa P400 |
Please contact sales |
Yasa 750R
The YASA 750R was developed as a low-speed, high-torque motor with leading torque and power densities. This motor is used in numerous industries and applications.
Picture | Part Number | Webstore | Downloads |
---|---|---|---|
Yasa 750R |
Please contact sales |
Traction Inverters
New Eagle supplies a variety of inverters. If needed, New Eagle can help you choose the best inverter solution for your project. Please contact us for more information.
John Deere Electronic Solutions
JD-PD400 Single
The PD400 traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD400 can produces 150-300 KVA output power depending on the configuration and weighs a mere 17.3 kg.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
JD-PD400S-PROTO |
Please contact sales |
PHO-PD400 Dual
The PD400 Dual traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD400 Dual can produces 150-300 KVA output power depending on the configuration and weighs 30.4 kg.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
JD-PD400D-PROTO |
Please contact sales |
Sevcon
- *NOTE: It is highly recommended that the SEVCON-IXXAT-KIT be purchased with an inverter.
Sevcon GEN4-S4
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
SEV-GEN4-S4-80V |
Sevcon GEN4-S6
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
SEV-GEN4-S6-48V |
||||
SEV-GEN4-S6-80V |
SEV-GEN4-S8-001
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact,
rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drive train system integrators.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SEV-GEN4-S8-001 |
SEV-GEN4-S10-001
The gen4, size 10 AC motor controller is designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV).
Its high voltage range, up to 800VDC, is well matched to the needs of the automotive, agricultural and commercial transport markets. The same hardware platform
handles both AC Induction and Permanent Magnet AC motor technologies.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SEV-GEN4-S10-001 |
SEV-GEN5
The Gen5 range of motor controllers utilise a highly flexibility control logic architecture to deliver unique feature rich set of functions is well matched to satisfy automotive,
commercial and construction markets electrification needs. The range of High Voltage High Power (HVHP) controllers is specifically aimed at vehicle OEM’s and system integrators
to offer them a compact, lightweight, rugged and cost effective class leading suite of solutions covering traction, hybridisation, power generation and sub-system electrification.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
(Coming Soon) |
Please contact sales |
-- |
SEV-HVLP-10 - Air Cooled
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of high voltage, low power inverters designed
for both on-road and off-road applications. The HVLP AC Motor Controllers work with Permanent Magnet and Induction motors. A compact, rugged and cost-effective
design, Sevcon’s HVLP Inverter is well-suited for OEMs, hybrid/electric bus & truck conversions, agricultural OEMs and EV system integrators.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SEV-HVLP-10 |
SEV-HVLP-20 - Water/Glycol Cooled
Introduced primarily for agricultural electrification and commercial vehicle auxiliaries, Sevcon released a new range of high voltage, low power inverters designed
for both on-road and off-road applications. The HVLP AC Motor Controllers work with Permanent Magnet and Induction motors. A compact, rugged and cost-effective
design, Sevcon’s HVLP Inverter is well-suited for OEMs, hybrid/electric bus & truck conversions, agricultural OEMs and EV system integrators.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SEV-HVLP-20 |
SEV-IXXAT-KIT
SEVCON IXXAT adapter harness with DVT software.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SEV-IXXAT-KIT |
UQM
UQM motors are sold as a package that includes a motor and inverter.
PowerPhase 55 HiTor
The UQM HiTor package includes a motor and inverter specifically designed for prototype or low-volume development work. Providing up to 94 percent efficiency,
these systems allow for engineering teams to make calibration changes and tune system parameters during development. This package is ideal for automotive,
lightweight commercial, marine, military and industrial vehicles.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PowerPhase 950 HD HiTor |
- |
PowerPhase Pro
UQM PowerPhase Pro systems are intelligently designed for maximum performance and versatility. Providing up to 95 percent efficiencies, these systems
consist of a high performance, liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for automotive, lightweight commercial, marine, military and industrial vehicles.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PowerPhase Pro 100 |
- | |||
PowerPhase Pro 135 |
- |
PowerPhase 220 HD
UQM PowerPhase HD systems are specifically designed for heavy-duty drive applications. Providing up to 95 percent efficiencies, these systems consist of a
high performance liquid cooled permanent magnet motor and a high-power, liquid-cooled inverter with a full-featured digital signal processor controller.
This package is ideal for medium to heavy duty truck, bus, marine, locomotive, military and industrial vehicles.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PowerPhase 220 HD |
- | |||
PowerPhase Pro 250 |
- |
*Datasheet is available with non-disclosure agreement and direct contact with sales.
Rinehart Motion
RMS PM Series
The RMS AC Traction Controllers are designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The PM-Series family is typically the
lightest and smallest inverter for its power due to its high heat flux thermal design approach.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
RMS-PM-100DX |
||||
RMS-PM-100DZ |
||||
RMS-PM-150DX |
||||
RMS-PM-150DZ |
||||
RMS-PM-250DX |
||||
RMS-PM-250DZ |
RMS RM Series
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
RMS-RM-100DZ |
Please contact sales |
HV Accessories
Onboard Chargers
Bel Power Solutions
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BEL-350INVCH150-120-240-xG |
Please contact sales |
15 kW Inverter/Charger
he Bel Power Solutions 350INVCHGT150-120-240-8G is a 15 kW inverter/charger that converts AC to DC voltages in charge mode and converts DC voltages to pure sine wave AC in standalone or utility mode. In the standalone mode the inverter/charger could supply some AC accessories and in the utility mode is able to push energy back to the grid. The liquid cooled inverter/charger operates at 250-435 VDC and 120/240 VAC (50/60 Hz) split-phase. The inverter charger powers up to 15 kW in either direction. Features include very high efficiency, high reliability, low total harmonic distortion (AC), low output voltage noise (DC), and excellent dynamic response to load/input changes.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BEL-350INVCHGT150-120-240-8G |
Please contact sales |
EDN
Please complete EDN form when purchasing.
7kW CMP375
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
TBD |
Please contact sales |
11kW EVO11KA
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EDN-EV011-KAR4 |
Please contact sales |
11kW EVO11KL
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EDN-EVO11-KLR4 |
Please contact sales |
12kW CMP419
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EDN0-CMP419 |
Please contact sales |
22kW EVO22KL
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EDN-EVO2-KLR_ |
Please contact sales |
Current Ways Chargers
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
CW-6.6OBC-001 |
Ovartech Chargers
On-board 6.6kW Liquid-Cooled Charger
The Ovartech 6.6KW on-board charger series is designed for electric vehicle battery charging with demand for efficiency, robustness and safety. The electrical input voltage ranges from AC 85~265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes the charging more economical. It provides intelligent charging mode which adjusts the voltage in CC/CV/cut off automatically. It also features short-circuit, over voltage, over current and over temperature protections under charging. The CAN-bus interface delivers message with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System).
CAD662DF-400A charger series is in compliance with SAE J1772 and IEC 61851 to meet international standard, and with IP 67 for critical operating environment.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
OVAR-OBC-01 |
Please contact sales |
DC-AC Inverters
Bel Power Solutions
400V DC to 120/240V AC Inverter
The Bel Power Solutions 350INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory
loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 240 to 430 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BEL-350INV60-120-240-9G |
700V DC to 120/240V AC Inverter
The Bel Power Solutions 700INV60-120-240-9G is a high-efficient DC/AC inverter that converts high-voltage DC power into split phase AC power 120/240 VAC required to drive AC accessory
loads directly from the High Voltage DC Drive or Battery Bus. Liquid cooled DC/AC inverter operates at input voltages from 400 to 850 VDC and power range up to 6000 W. The DC/AC inverter utilizes CAN communication to the vehicle controller which allows selection of operational modes and frequency selection. The DC/AC inverter is built in a sealed aluminum enclosure, ready to be mounted to the vehicle chassis and is a commercial-off the-shelf solution for electric vehicle manufacturers and developers.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BEL-700INV60-120-240-9G |
Please contact sales |
DC-DC Converters
Bel Power Solutions
4kW DC-DC Converter
The Bel Power Solutions DNC Series of 4 kW DC/DC Converters creates DC voltages in hybrid and electric vehicles suitable to power low voltage accessories. The liquid cooled or convection cooled DC/DC converter operates at wide range of input voltages and delivers power range up to 4000 W / 3300 W (liquid / natural cooled version). Features include very high efficiency (up to 93%), high reliability, low output voltage noise, and excellent dynamic response to load/input changes.
Picture | Part Number | Webstore | Downloads | Connector Kits |
---|---|---|---|---|
BEL-350DNC40-12-8G |
BEL-350DNC40-CON-KIT-8G - or - BEL-350DNC40-CON-KIT-9G | |||
BEL-350DNC40-12-CG |
||||
BEL-350DNC40-24-8G |
||||
BEL-350DNC40-24-CG |
||||
BEL-700DNC40-12-8G |
BEL-700DNC40-CON-KIT-8G - or - BEL-700DNC40-CON-KIT-9G | |||
BEL-700DNC40-12-CG |
||||
BEL-700DNC40-24-8G |
||||
BEL-700DNC40-24-CG |
Sevcon
Sevcon DC/DC Converters
The Sevcon 500W & 1.2WK DC/DC converters are suitable for all electric powered vehicles and are designed to be fitted on-board the vehicle and to be connected permanently to the battery. These fully encapsulated converters deliver a stable, isolated high power.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SEV-80V-500W-001 |
||||
SEV-GEN5-DCDC-001 | Please contact sales |
Axiomatic
The DC/DC converter is suitable for application on charging/cranking battery-based systems. Power from a vehicle battery is conditioned at the same voltage level and isolation is provided to protect onboard electronic devices.
Picture | Product Name | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|---|
Axiomatic Isolated 24VDC/24VDC Converter |
AX081530 |
- | |||
AX081530K (with 2mm cable) |
Axiomatic Isolated 24Vdc/24Vdc Converter
The DC-DC Converter provides clean 24VDC power suitable for instrumentation and control networks or process equipment. For operation under the most harsh and demanding conditions, the unit is fully sealed and enclosed to protect against moisture, shock and vibration. Power from a battery or other source in the range of 11-32VDC is converted to a 24VDC output regulated to 1%. Input and output isolation is provided. The unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a 24V input, the nominal nameplate rating is 120 Watts of output power. With a 12V input, the nominal nameplate rating is 95 Watts of output power. The DC-DC Converter has an efficiency rated at >90%.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
AX-PSU1K |
-- |
Ovartech DC-DC
EV/HEV DC/DC Converter 1.5KW/1500W
The Ovartech range of DC/DC Converters are suitable for a wide range of electric powered vehicles and are specifically designed to be fitted on-board the vehicle and connected permanently to the battery. This range of High Voltage DC/DC products are designed to satisfy the current trend to use higher battery voltages between 108Vdc to 800Vdc which are converted to lower voltages to power ancillary loads. Options include nominal 12Vdc output, with exact output voltage set using a CAN communications command.
The products can satisfy a range of power requirements from 1kW to 12kW (when paralleled only). The High Voltage DC/DC range is designed to offer full performance across the temperature range of -40˚C to +45˚C (air cooled) and +65˚C (liquid cooled). It has many protection features such as input UVLO, input OVLO, input reverse polarity, current limit, output short circuit and over temperature. The CAN communications features allow the units to be enabled and disabled with communications messages.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
OVAR-DCDC-002 |
Please contact sales |
Onboard Charger / DC-DC Converters
Ovartech OBC/DC-DC
6.6KW OBC+2KW DC-DC Liquid-cooled
The Ovartech CAD662DF400-14202 is a combination high-frequency 6.6KW battery charger and 2KW DC/DC converter in one package, Integrated high-frequency battery charger andDC/DC converter saves space, weight, and cabling thereby minimizing the cost of inventory, installation, and service.
CAD662DF400-14202 on-board charger series is designed for electric vehicle battery chargingwith demand for efficiency, robustness and safety. The electrical input voltage for CAD662DF400-14202 ranges from AC 85~265V, making it an ideal selection for worldwide usage. Its high-efficiency performance makes the charging more economical. CAD662DF400-14202 provides intelligent charging mode which adjusts the voltage in CC/CV/cut off automatically. It also features short-circuit, over voltage, over current and over temperature protections under charging. The CAN-bus interface delivers message with charging flow, interlock connection, and any disconnection or error message to VCU (Vehicle Control Unit) via BMS (Battery Management System). CAD662DF400-14202 charger series is in compliance with SAE J1772 and IEC 61851 to meet international standard, and with IP 67 for critical operating environment.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
OVAR-OBC-DCDC-01 |
Please contact sales |
Ovartech OBC/DC-DC/PDU
6.6KW OBC+1KW DC-DC Liquid-cooled+PDU
Combination high-frequency battery charger + DC/DC converter + power distribution
unit (PDU) in one package.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
OVAR-OBC-DCDC-PDU-01 |
Please contact sales |
Heating and Cooling
High Voltage Air Conditioning
New Eagle offers a high voltage air compressor unit for EV and HEV applications. The EV36BNx operates between 270-440 VDC and has 36cc/rev of displacement.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
|
EV36BNKx |
Please contact sales* |
*Datasheet is available with non-disclosure agreement and direct contact with sales.
High Voltage PTC Heating Unit
New Eagle offers a PTC (Positive Temperature Coefficient) heating unit for EV and HEV applications. It operates between 220 and 400VDC and has a heating capacity of 5kW @334V, 360L/h
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
MI-G2PTC-HEAT |
Please contact sales |
Please contact sales* |
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
|
MI-EWH40DX |
Please contact sales |
Please contact sales |
*Datasheets available with non-disclosure agreement and direct contact with sales.
Isometers
Bender Isometers
The ISOMETER® monitors the insulation resistance between the active HV components of
an electrical drive system (Un = DC 0 V…600 V) and the reference earth (chassis ground).
The patented measurement technology is used to monitor the condition of the insulation
on the DC side as well as on the AC motor side of the electrical drive system
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BEN-ISO175C-1 |
Please contact sales | |||
- |
BEN-CONKIT-ISO175C-1 |
Please contact sales |
LV Accessories
Cooling Pumps
Full Cooling System
New Eagle presents 5KW and 10KW cooling systems for the Borg Warner HVH250 motor. This kit includes pump, cooling coil and fan, hoses and accessories.
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
VAX-COL-5KW |
Please contact sales |
Please contact sales |
Oil Pumps
EMP OP 35
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
EMP-OP35-01 |
Please contact sales |
Upon Request: Please contact sales | ||
EMP-SERV-KIT-01 | Please contact sales | Datasheet | Please contact sales |
EMP OP 40i
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
EMP-OP40i-01 |
Please contact sales |
Upon Request: Please contact sales |
EMP OP 80c
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
EMP-OP80c-01 |
Please contact sales |
Upon Request: Please contact sales |
EMP OP 40c
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
EMP-OP40c-01 |
Please contact sales |
Upon Request: Please contact sales |
EMP OP 3530c (Coming Soon)
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
EMP-OP3530c-01 |
Please contact sales |
Upon Request: Please contact sales |
Water Pumps
EMP WP 29
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
EMP-WP29-01 (12 volt) |
Please contact sales | Datasheet | Please contact sales | |
EMP-WP29-02 |
Please contact sales |
Upon Request: Please contact sales | ||
EMP-SERV-KIT-01 | Please contact sales | Datasheet | Please contact sales |
Brushless DC Water Pump
This family of brushless DC water pumps are centrifugal pumps that operate with high efficiency, require low power consumption, and have long services lives. These pumps are widely used in electric and hybrid busses, passenger cars, trains, ships, and other vehicles utilizing heating and cooling circulation systems. The pump is part of New Eagle’s line of rugged, automotive-grade, and production ready hardware. With our validated, off-the-shelf components manufactured by some of the largest and most trusted manufacturers in the world, you can get your design up and running without expensive tooling or volume requirements.
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
DKB80-12A | 12V |
Please contact sales |
Please contact sales |
Displays
VeeCAN 320 EV Display
The VeeCAN 320 EV Display is a Raptor VeeCAN320 Lite that is pre-programmed with EV display software. The display easily integrates into your system and is already configured to display fundamental EV parameters, such as battery SOC, motor speed, drive mode, and faults. |
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
ASM-DISP-MH-EV-01 |
Raptor VeeCAN 800
A larger option to the VeeCAN 320 EV Display is the Raptor VeeCAN 800. This device is not pre-programmed with EV display software like VeeCAN 320 EV Display; however, users can choose to develop display software themselves using Raptor-Dev or hire New Eagle to develop custom display software for their application. |
The VeeCAN 800 is a 7" fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display and two USB ports (one rear and one front accessible). The VeeCAN 800 also supports 14 analog inputs, four digital inputs, eight outputs, two CAN connections, as well as an Ethernet connection.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC800-1402 |
Specialty IO Devices
Foot Pedals
New Eagle sells electronic foot pedals that could be used as accelerator or brake pedals for your vehicle. The pedals have dual potentiometers that source power from 2 independent power supplies and output voltages between 0 & 5 V and 0 & 2.5 V. We also sell a connector kit for developing a harness that fits your needs. We have both firewall and floor mounted models.
Floor Mount Foot Pedal
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EFP-136-01 |
Please contact sales |
- |
Firewall Mount Foot Pedal
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EFP-139-00 |
Please contact sales |
- |
In the event that you want to interrupt the accelerator pedal or need to create a pedal signal output, you can try our PWM to Analog Converter.
Pedal Emulator
The New Eagle PWM to Analog Converter converts 3 separate channels of PWM signals to proportional 0-5V analog signals. The converter is especially useful when paired with control modules with PWM outputs, but no 0-5V analog outputs. This device is very useful as a pedal emulator.
Picture | Product Name | Part Number | Webstore | More Information |
---|---|---|---|---|
PWM to Analog Converter |
PWM-AN-024-1403 |
Power Distribution
Relay and Fuse Box
The New Eagle™ Multiplexed Power Distribution Module offers economical CAN Network oversight for high power circuits in vehicle power distribution. Manufactured as a hardened and weather tight module, it may be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays and breakers, with the status and control of each circuit accessible through J1939/CAN open messages.
Picture | Product Name | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|---|
Multiplexed Power |
MPDM-NE1 |
||||
MPDM-31M-300-0 |
Solid-State Relay Control Device
The CM0410 is a general purpose input / output module that includes a single J1939 CAN interface, 4 inputs, 1 high side current measurement pass-through, and 10 high-side outputs. The main function of the product is to provide a means of controlling relays through J1939 messages on the CAN bus.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
CM0410 |
Power Distribution Unit
The New Eagle™ Power Distribution Unit (PDU) provides a solution to electric and hybrid electric vehicle high voltage distribution. It is environmentally
sealed and designed for multiple output configurations. The PDU is designed to work with the low side drivers of any New Eagle™ controller to provide easy integration and control.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
ASM-PDU-NE1 |
Manual Service Disconnect
The Manual Service Disconnect (MSD) offers a solution to safely remove an internal HV battery pack without short circuiting using a two stage lever to open the HVIL circuit prior to separation of HV contacts.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
ASM-MSD-250A-001 |
-- |
Battery Management Interfaces
Fast Charger
Compatible with nearly any Li-Ion battery system, this vehicle-side interface is perfect for any quick charge solution.
- Available with optional CHAdeMO support
- Design is compact and easy to install
- Simple and cost effective
- Solution for EV projects
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
LIB-FCI-CHADEMO |
Coming Soon | |||
Coming Soon |
Please contact sales |
J1772 Vehicle Power Interface Module
The New Eagle™ J1772 Vehicle Power Interface Module (VPIM) provides the necessary circuitry to interface with Electric or Plug-In Hybrid Electric (EV/PHEV) vehicles charging equipment in accordance with the SAE J1772 specification.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
VPIM-024-1301 |
Battery Systems
New Eagle offers battery products with BMS or the assistance to build a battery using an off-the-shelf or a custom BMS.
Battery Management Systems
Integrated BMS System
New Eagle is pleased to offer a complete BMS solution with robust hardware and software designed to fulfill all of the necessary BMS functions. The offerings are expandable in series for a wide variety of cell chemistry and pack configurations and includes pre-wired harnesses.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
ASM-BMS-108-001 ASM-BMS-123-001 |
Distributed BMS System
LiBAL s-BMS™ Interface Boards
This battery management system is capable of handling any scale system, adapting to all types of Li-ion batteries, and a standard off the shelf design it fits the project's needs without a redesign.
Benefits:
- Standard design
- Supports up to 256 cells
- Up to 1000 VDC
- Embedded Post-Processing
- Electromagnetic Immunity
- Vibration Resistant
- 27 Error modes
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
LIB-BMCU-001 |
||||
LIB-LMU-001 |
*Note: BMS requires management software (see below)
LiBAL s-BMS Harness Kits
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
LIB-HARNKIT-BMCU-01 |
-- |
Upon Request: Please contact sales | ||
LIB-HARNKIT-LMU-01 |
-- |
LiBAL s-BMS Shunt Kit
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
LIB-SHUNT-500A-C |
-- |
Upon Request: Please contact sales | ||
LIB-SHUNT-300A-C |
-- | |||
LIB-SHUNT-200A-C |
-- |
LiBAL s-BMS Heat Sink Kit
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
[Coming Soon] |
LIB-LMU-HS-KIT |
-- |
Upon Request: Please contact sales |
LiBAL s-BMS Software
Picture | Part Number | Webstore | Datasheet Downloads | More Information |
---|---|---|---|---|
LIB-MGT-SW-001 |
-- |
Coming Soon Please contact sales | ||
LIB-SRV-SW-001 |
-- |
Battery Cell Modules
New Eagle has strategic relationships with battery cell manufacturers and can participate with its customers on the design and sourcing of pack systems. One concept that has been successful is using off the shelf modules with one of our BMS options, enclosed in a housing made by either our engineering team or our customers.
To discuss options, please contact sales@neweagle.net.
Transmissions
Borg Warner
The BorgWarner 31-03 eGearDrive electric-drive transmission is the next generation of technology developed for adaptability across a broad range of applications for the emerging vehicle electrification market. The eGearDrive incorporates high-efficiency geartrain technology contributing to extended batterypowered driving range and high torque capacity with greater than 97% efficiency.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
BW-EGD-31-03-8.28 |
Please contact sales |
Please contact sales |
Heavy Duty Transmissions
Electric Vehicle Transmission - Medium duty fixed rate reducer
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EVT1 |
Please contact sales |
Please contact sales |
Electric Vehicle Transmission - Medium-Heavy duty 2 speed with reducer
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EVT2-R |
Please contact sales |
Please contact sales |
Electric Vehicle Transmission -Extra Heavy Duty 2 speed with reducer/Spur gear
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EVT2-RHD |
Please contact sales |
Please contact sales |
Electric Vehicle Transmission - Heavy duty 4 speed
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
EVT4 |
Please contact sales |
Please contact sales |
MAGELEC Gearboxes
MAGELEC Gearboxes
MAGELEC Gearboxes
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
MAG-F03L-01 |
Please contact sales |
Please contact sales | ||
MAG-F03T-01 |
Please contact sales |
Please contact sales | ||
MAG-F06L-01 |
Please contact sales |
Please contact sales | ||
MAG-F06T-01 |
Please contact sales |
Please contact sales | ||
MAG-F06V-01 |
|
|
| |
|
MAG-F12L-01 |
|
|
|
}
Discontinued Products
John Deere Traction Inverters
PHO-PD300
The PD300 traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD300 produces 200 KVA output power and weighs a mere 17 kg.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PHO-PD300-PROD |
PHO-PD550 Dual
The PD550 Dual traction inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control.
This high-voltage, high-power module works at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal
management system delivers robust and reliable performance over the life of the system. The PD550 Dual produces 300 KVA (x2 outputs) output power and
weighs 64 kg.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
PHO-PD550-PROD Dual |
Remy Motors (now Borg Warner)
Picture | Part Number | Winding Type | Webstore | More Information
|
---|---|---|---|---|
BW-HVH250-90-DWM |
Dual |
More Details
| ||
BW-HVH250-90-SWM |
Serial |
Delphi 12V, 2.2kW DC-DC Converter
We support many customers of the discontinued Delphi 2.2KW DC-DC Converter. Therefore, we are keeping the data sheet and user manuals available to our customers. New Eagle has built a MotoHawk Library to communicate to and from the DC-DC converter.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
Universal 2.2kW DC-DC Converter - Obsolete |
Please contact sales |
Shinry Onboard Chargers
3.3kW Liquid Cooled (No longer available)
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
(No longer available) |
Replacement is 6.6kW |
Please contact sales |
6.6kW Liquid Cooled with SAE 1772
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
(No longer available) |
Shinry DC-DC Converter
Shinry 2kW DC-DC Converter
The Shinry 2kW DC-DC converter is designed for all types of electric vehicle applications. It is liquid cooled and offers an efficiency up to 95%.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
SHI-2KW-DC-01 |