Displays
New Eagle offers a wide variety of displays that can meet the needs of practically any automotive, hydraulic, marine, or engine application. Whether your application demands a touchscreen display with custom graphics and data logging capability or you simply need to monitor generic engine parameters, New Eagle can provide a cost-effective display solution for your project. If your project does require a custom display, New Eagle can quickly develop custom software in-house or alternatively equip you with everything you need to begin developing custom display software yourself.
|
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC800-1402 |
Raptor VeeCAN 700
The Raptor VeeCAN 700 is a 7-inch color display wrapped in a rugged, environmentally-sealed enclosure. The Raptor VeeCAN 700 has two CAN channels for monitoring, data logging or transmitting commands from the display over the CAN bus. In relatively simple applications with only CAN-based sensors and actuators, the Raptor VeeCAN 700 can even act as a low-cost, all-in-one display/controller solution.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC700-2003 |
Raptor VeeCAN 500
The Raptor VeeCAN 500 is a 5-inch color display wrapped in a rugged, environmentally-sealed enclosure. The Raptor VeeCAN 500 has two CAN channels for monitoring, data logging or transmitting commands from the display over the CAN bus. In relatively simple applications with only CAN-based sensors and actuators, the Raptor VeeCAN 500 can even act as a low-cost, all-in-one display/controller solution.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC500-1904 |
Raptor VeeCAN 300R
The VeeCAN 300R is a 3" round capacitive touchscreen display. It features a WVGA 432 x 432 LCD color display, and one USB port on the rear. The VeeCAN 300R also supports seven analog inputs, four digital inputs, one relay output, one CAN connection, as well as one RS-485 connection.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC300R-2004 |
Raptor VeeCAN 320
The VeeCAN 320 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN connections and one USB 2.0. Perfect for use with data logging, diagnostics and a control module.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC320-1204 |
||||
DISP-VC320-LP-1602 |
Raptor VeeCAN 320 Lite
The VeeCAN 320 Lite display houses a 3.5" color display with CAN and USB compatibility. Perfect for use as a data logger or a sensor module.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC320L-1402 |
||||
DISP-VC320L-LP-1602 |
Raptor VeeCAN 320 J1708
The VeeCAN 320 J1708 display houses a 3.5" color display with seven analog inputs, three digital inputs, four outputs, two CAN connections and one USB 2.0. Perfect for use with data logging, diagnostics and a control module. This version is J1708 compatible.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC320-J1708-1204 |
See VeeCAN J1708 below for datasheet |
- |
Raptor VeeCAN 128
The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with four warning LEDs, four tactile buttons, a 6-pin connector, CAN 2.0B and one USB 2.0.
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
DISP-VC128-1902 |
Standard Displays
Pre-programmed Generic Engine Monitoring Displays
All of our standard displays (i.e. non-raptor) are available with pre-installed Generic Engine Monitoring (GEM) software. The GEM software allows the user to connect the display directly to a J1939 CANbus and monitor many different engine and vehicle parameters. A series of easy to use menu screens allow these displays to be configured to suit the individual application. Typical options include language and unit options and various screen layouts to show parameter icons, bar-graphs and alphanumeric text. If you are using a Generic Engine Monitoring display in your application, purchase of an SDK is not necessary.
C Programmable Displays
Custom display software can also be developed in the C programming language for any of our displays. In order to write custom display software in C, a Software Development Kit (SDK) must be purchased in addition to the display itself.
Additional Information
Please log in to view the following section:
VeeCAN 800
The VeeCAN 800 is 7" a fully waterproof resistive touchscreen display. It features a WVGA 800 x 480 TFT LCD color display, and 2 USB ports (1 rear and 1 front accessible). The VeeCAN 800 also supports 14 analog inputs, 4 digital inputs, 8 outputs, 2 CAN connections, as well as an Ethernet connection.
|
VeeCAN 700
The VeeCAN 700 is a 7" IP67 waterproof PCAP touchscreen display. It features a WVGA 800 x 480 TFT LCD color display, and 2 USB ports. The VeeCAN 700 also supports 1 analog input, 1 digital input, 1 output, 2 CAN connections, as well as an Ethernet connection.
|
The VeeCAN 500 is a 5" IP67 waterproof PCAP touchscreen display. It features a WVGA 800 x 480 TFT LCD color display, and 2 USB ports. The VeeCAN 500 also supports 1 analog input, 1 digital input, 1 output, 2 CAN connections, as well as an Ethernet connection.
|
The VeeCAN 300R is a 3" round IP67 waterproof PCAP touchscreen display. It features a WVGA 432 x 432 TFT LCD color display, and 1 USB port. The VeeCAN 300R also supports 6 analog inputs, 4 digital inputs, 1 frequency output, and 1 CAN connection.
|
Picture | Part Number | Webstore | Downloads | More Information |
---|---|---|---|---|
VeeCAN 320 |
VeeCAN Software SDK and Compiler
The VeeCAN 320 has an optional Software Development Kit for programming in C and a Raptor Simulink programming interface. It uses a free linux gcc compiler. Contact sales or vist the webstore for pricing and availability. Application engineering is available to help build your display or provide additional support.
Example Screens
New Eagle develops custom screens and sells a tool that allows a user to easily create their own custom screens, communications and logic on the VeeCAN 320. For more examples, click here.
VeeCAN 320 Lite
The VeeCAN 320 lite display houses a 3.5" color display with CAN and USB compatibility. Perfect for use as a data logger or a sensor module.
|
The VeeCAN 320 J1708 display houses a 3.5" color display with 7 analog inputs, 3 digital inputs, 4 outputs, 2 CAN channels, 1 J1708 Serial and 1 USB 2.0. Perfect for use with data logging, diagnostics and a control module.
|
The VeeCAN 320 Low Profile display features a stylish and sleek profile bezel. The display acts as a reader and/or data logger for monitoring of your engine's key parameters. It is the next generation of compact, highly flexible, rugged CAN bus displays. Electrically and environmentally rugged, the VeeCAN 320 Lite is ready to meet the challenges of providing tough, flexible instrumentation for harsh environments.
|
The VeeCAN 320 Low Profile LITE display features a stylish and sleek profile bezel. The display acts as a reader and/or data logger for monitoring of your engine's key parameters. It is the next generation of compact, highly flexible, rugged CAN bus displays. Electrically and environmentally rugged, the VeeCAN 320 Lite is ready to meet the challenges of providing tough, flexible instrumentation for harsh environments.
|
The VeeCAN 128 is a rugged display wielding a 2.3" monochrome display suitable for any environment. The VeeCAN 128 comes standard with 4 warning LED's, 4 tactile buttons, a 6 pin connector, CAN 2.0B and one USB 2.0. The product comes with a J1939 engine monitor standard or is C programmable.
KAntrak 1700KAntrak 1700, A rugged 3"x3" device containing a compact LCD display, perfect for harsh condition testing and diagnostics. It comes with GEM (Generic Engine Monitor) installed as standard.
KAntrak 2700 / CANtrak 7200The KAntrak 2700/CANtrak 7200 is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities.
KAntrak 2710 / CANtrak 7210The KAntrak 2710/CANtrak 7210 is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities. This version contains a built-in heater for extreme low-temperature operation.
KAntrak 2710 CSAThe KAntrak 2710 CSA is a rugged 4" x 4" monochrome display with the potential to be used for data logging, diagnostics or control capabilities. This version contains a built-in heater for extreme low-temperature operation, and CSA certification.
Special Application DisplaysNMEA2000 Universal Engine Gateway Monitor (EGM)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||